LinkBack URL
About LinkBacks
Reply With Quoteyup. i used a 1" lift shackle on my driver side, so i did the opposite thing you're talking about. but it'll do the same thing man.
|
|
|
This is a discussion on The Chevy Lean within the Street forums, part of the General Discussion category; My 2000 Silverado Stepside was lowered 3/5 using a Belltech kit, but the passenger side rear seems to be about ...
The Chevy Lean
My 2000 Silverado Stepside was lowered 3/5 using a Belltech kit, but the passenger side rear seems to be about 1 inch higher. Would a Belltech 3" 6403 shackle on the passenger side lower it another 1 inch? I know the 6403 is designated for a HD suspension, but wonder if this would work.
yup. i used a 1" lift shackle on my driver side, so i did the opposite thing you're talking about. but it'll do the same thing man.
2009 GMC SIERRA | SLAMMED 5/7 | 22" BOSS 330'S | ASE MASTER CERTIFIED
That is one solution to the lean, but then I won't get the drop I want. I want to lower the passenger side 1/2" - 3/4" lower to compensate to even up the drop. I guess another solution is to de-arch the passenger side leaf spring.
Last edited by 78C-10SWB; 10-30-2006 at 02:38 PM.
http://www.fullsizechevy.com/forums/...d.php?t=236392
i explained the chevy lean in this thread.....maybe a moderator should make it a sticky?
Posting Permissions
 |
Bookmarks