LinkBack URL
About LinkBacks
Reply With Quotei'd had 5/7 and 5/8 in my truck and the 5/8 makes the back end sit just a tad too low in my opinion. i would go with 5/7
|
|
|
This is a discussion on static drop Q's within the Street forums, part of the General Discussion category; Hey I have a 90'ECSB with a 4/4 drop. Up front I have 2" drop spindles and 2" drop coils ...
static drop Q's
Hey I have a 90'ECSB with a 4/4 drop. Up front I have 2" drop spindles and 2" drop coils and out back I have 2" drop hangers and 2" drop shakles and suspension by DJM. I want to know if I get 3" drop leafs in the back and put a huge notch in the frame if i will run into pinion angle issues? and wat do u think about a 4/7 drop or should i go with a 5/8 but i dont know how to get another 4" in the back with out going back to factory shakles or hangers and putting a flip kit in.
i'd had 5/7 and 5/8 in my truck and the 5/8 makes the back end sit just a tad too low in my opinion. i would go with 5/7
Whatever you do to get lower you should put the factory hangers back on.If you try and do any "combo" deals to get lower w/ the hangers you will have driveline issues.
Originally Posted by CKTA
Whatever you do to get lower you should put the factory hangers back on.
Travis a.k.a. "THE KID"
Building a SFBD with a 120v MIG Welder....
Go 5-7 after putting the stock hangers back on.
click signature for pics
90 454ss
92 454ss
08 Avalanche
I wish people were like slinkys, fun to play with but when I get bored I can push them down the stairs.
Posting Permissions
 |
Bookmarks