notches anyone??

**IRS'dlayinbody** · 04-18-2003, 12:25 AM

i am going to be making some notches next week anyone in the market for one. they are made out of 2x3" box tubing .120 walled superstrong

i have a 7" notches. 10" notches and a notch to keep everything under the bed of the truck it is 5" it will get you down as low as possable with keeping the bed intack

if any one is interested let me know

i can also build custom ones needed

thanks

Billy

**BaggedC10** · 04-18-2003, 01:27 AM

I am possibly interested in a custom notch.

What measurements do you need? I like the kind Larry makes---The top ends are rounded and they slide over the frame.

**IRS'dlayinbody** · 04-18-2003, 01:52 AM

Originally posted by LowC10
I am possibly interested in a custom notch. What measurements do you need? I like the kind Larry makes---The top ends are rounded and they slide over the frame.

check you PM's

**BaggedC10** · 04-18-2003, 01:58 AM

Originally posted by 98layingframe98
check you PM's

Done.

**bl929rr** · 04-18-2003, 08:53 PM

What can you do for my 99 Tahoe (classic body). I am ready to bag the back and want to hack it up to lay frame!

**BaggedC10** · 04-18-2003, 09:30 PM

Clean out your PM's, Billy.

**IRSd_mini** · 04-19-2003, 01:55 AM

Originally posted by LowC10
I am possibly interested in a custom notch. What measurements do you need? I like the kind Larry makes---The top ends are rounded and they slide over the frame.

Billy likes the bridges I do.... that's why he had me do his Bahahahahahahahahaha.... J/k
Did chuck post a pic of the notch & bridge I did for him ? if so can you tell me where the pic is ? Thanks.

**IRS'dlayinbody** · 04-19-2003, 11:48 AM

Originally posted by IRSd_mini

Billy likes the bridges I do.... that's why he had me do his Bahahahahahahahahaha.... J/k
Did chuck post a pic of the notch & bridge I did for him ? if so can you tell me where the pic is ? Thanks.

hahaha yeah yeah yeah i design you bend! haha... i havent seen anything yet i want to see this thing!

**smashingchuck** · 04-20-2003, 01:39 AM

Originally posted by IRSd_mini

Billy likes the bridges I do.... that's why he had me do his Bahahahahahahahahaha.... J/k
Did chuck post a pic of the notch & bridge I did for him ? if so can you tell me where the pic is ? Thanks.

no, I didn't... My digital camera got stolen out of my truck... I will post some pics when I get a chance, but it will be a while.

chuck

**sack** · 04-21-2003, 02:16 AM

i am definitly interested!

how would they weld on?

and what would i need to bag this summer(i want to lay frame, so probably the 10 inch), but with a notch that big is the frame any weaker?

would this notch be as strong as any other notch? stronger?

$$ and shipping $$? or could i pick it up this summer on a road trip(i didn't see where you lived before i started writing this, so don't mind if i'm way off)?

**1badgmc** · 04-21-2003, 09:05 AM

Originally posted by bl929rr
What can you do for my 99 Tahoe (classic body). I am ready to bag the back and want to hack it up to lay frame!

I'd be interested to know what you can do on these as well. Of course, I am not interested in hacking the floor, so as big as possible under the floor would be good. :)

**1badgmc** · 04-21-2003, 09:31 AM

Originally posted by 5-8CHEVY

Lowhoe will be running a Super C and that's the lowest you can go w/out cutting the floor.

Where from? How much? All that good stuff...

**IRS'dlayinbody** · 04-21-2003, 05:02 PM

hey whats up guys the one im making that will keep all the goodies under the bed is similar to that but it is made do fit in the 88-98 frame rails it is all box tubing much stronger for the size you are cut out of your frame... if you want one PM me ill work out a deal.

**bl929rr** · 04-21-2003, 06:50 PM

Billy, check your PM.

**IRS'dlayinbody** · 04-21-2003, 10:46 PM

Originally posted by bl929rr
Billy, check your PM.

check your pm's

**BaggedC10** · 04-28-2003, 12:08 PM

Billy, clean out your PM's.

**uihockey2** · 04-28-2003, 04:07 PM

how much are you charging for a 7" or 10" notch for a 96 c1500? i may be interested, im still figuring out what exactly im going to do. thanks, tom

**IRS'dlayinbody** · 04-28-2003, 08:05 PM

Originally posted by uihockey2
how much are you charging for a 7" or 10" notch for a 96 c1500? i may be interested, im still figuring out what exactly im going to do. thanks, tom

check your pm's