FSC Forum - View Single Post - My '67 Chevy SWB Stepside rebuild Project

Joe · 11-04-2005, 11:55 AM

This thread will be updated as progress continues so stay tuned

This started out as a '67 Stepside driver we bought in 1991.

We kept it a nice driver until April 2004 when it was hit and caused the damage below.

This is the current state of the project. It was in the 70s today in Michigan so I gave my chassis a bath and layed out some of the body parts

I was fortunate to score some nice sheet metal this past summer. I still need to decide on a powertrain

Chassis is a 1972 1/2 ton 5 lug, front disc, dual exhaust, Big Block mounts, front sway bar setup. Powdercoated gloss black from front to rear.

Rear fuel tank is from FuelCellGuy - www.aluminumfuelcell.com
Moog pitman and idler arms with local rebuilt power steering gear
PST Front end rebuild kit (rubber) - www.p-s-t.com
PST Trailing arm bushings (Poly)
Early Classic 4/6 drop kit - www.EarlyClassic.com
Rear end is a GM 12 Bolt, DTS 3.73, Posi, Moser axles - www.drivetrainspecialists.com

Next up is the brake lines from front to back. Once that is done, Everything gets torqued down and the chassis is complete

Cab is currently awaiting some rust repair on the frame mounts, floors and corners along with some minor mods.

A HUGE thank you to my father, this fourm as well as www.67-72ChevyTrucks.com. Without it I would never have taken this project on

11-04-2005, 11:55 AM	#1
Joe Back to normal Status: Offline Join Date: Sep 2001 Member ID: 171 Pics: My Gallery Location: Detroit Age: 41 Posts: 26,771	My '67 Chevy SWB Stepside rebuild Project This thread will be updated as progress continues so stay tuned This started out as a '67 Stepside driver we bought in 1991. We kept it a nice driver until April 2004 when it was hit and caused the damage below. This is the current state of the project. It was in the 70s today in Michigan so I gave my chassis a bath and layed out some of the body parts I was fortunate to score some nice sheet metal this past summer. I still need to decide on a powertrain Chassis is a 1972 1/2 ton 5 lug, front disc, dual exhaust, Big Block mounts, front sway bar setup. Powdercoated gloss black from front to rear. Rear fuel tank is from FuelCellGuy - www.aluminumfuelcell.com Moog pitman and idler arms with local rebuilt power steering gear PST Front end rebuild kit (rubber) - www.p-s-t.com PST Trailing arm bushings (Poly) Early Classic 4/6 drop kit - www.EarlyClassic.com Rear end is a GM 12 Bolt, DTS 3.73, Posi, Moser axles - www.drivetrainspecialists.com Next up is the brake lines from front to back. Once that is done, Everything gets torqued down and the chassis is complete Cab is currently awaiting some rust repair on the frame mounts, floors and corners along with some minor mods. A HUGE thank you to my father, this fourm as well as www.67-72ChevyTrucks.com. Without it I would never have taken this project on 2000 GMC Sierra Z71 // 1967 Chevy Project // Michigan Classics // 67-72 Chevy Trucks // SerfzUp - Home & Small Business Network Solutions // My ebaY auctions