|
Pw
ok so on my set-up i run 80# injectors at 24psi.....and i ams till close on pw..... but i am not sure i have it right..ok at wot 12.4afr pw jump high at low rpm like at 3200 its 5.2ms...then at 3600 4.9ms...4400.4.4ms...5200 4.3ms.. 5500 4.2ms am i in the clear here.....or do i need more pressure...?
92 5.9l full roller,fully forged,scatt crank.AFR 180cc heads,Crane 2032cam,700R4 raptor trans,yank3200,14-bolt,auburn 4.11.still TBI 
|