Led's Installed (pics inside) [Archive]

s3gulit

07-17-2004, 11:58 PM

well, i got home early enough and remembering enough to take some pics for y'all. First one is before, last 2 are with the LED's.

BEFORE:
http://img17.photobucket.com/albums/v52/s3gulit/Interior-New/aa.jpg

AFTER:
http://img17.photobucket.com/albums/v52/s3gulit/Interior-New/red-1.jpg

http://img17.photobucket.com/albums/v52/s3gulit/Interior-New/red-2.jpg

Sorry there a little blurry, but you should get the point. I just wanna say thanks to SIK for the awesome shipping and help even though i was a PITA to them wondering where my products' were. :rocking:

NOTE: Gimme some honest opinions, ill have some more pics up of the white needles that are on there way as well.

MIZ71

07-18-2004, 10:52 AM

I like it. The glowing needles give it that "Dante's Inferno" quality. Was it easy to do?

s3gulit

07-18-2004, 11:27 AM

Yeah. It was pretty much the same thing as putting a layover gauge face on. Remove the trim around the gauges, air conditioning control and stuff, then remove the 4 screws holding the cluster in, then pull it out. on the back (for my 96 anyway) there are 3 black and 3 grey bulb holders/connectors. I removed all of them and replaced the bulbs with the led's at once. Then i simply put one LED in at a time to make sure they weren't installed with the opposite polarity. Probably took me 20-25 minutes tops because i lost a screw in the air conditioning vent and had to get my extension magnet thing out and go fishing.

Coop

07-18-2004, 11:44 AM

where did you get these bulbs, and what kind of price? Also, what kind of gauge overlay is that? thanks in advance.

s3gulit

07-18-2004, 12:36 PM

i got the bulbs from SIK ( www.streetinspiredkustoms.com ) and they have 6 colors i believe. There's 4 led's per "bulb" so the hotspots aren't that bad. The gauge overlay is from US Speedo ( www.usspeedo.com )

The LED's were $30 for all six, and the gauge overlays run $180-$200 Your welcome in advance too :crazy:

camnut

07-18-2004, 12:41 PM

Those look good, i did mine in blue :head:

Originally posted by Coop
where did you get these bulbs, and what kind of price? Also, what kind of gauge overlay is that? thanks in advance.

I purchased my blue leds from http://www.superbrightleds.com

You can also get the overlay from http://streetinspiredkustoms.com

http://streetinspiredkustoms.com/9597gm.jpg

thArf

07-18-2004, 03:48 PM

im digging that camnut thats the first speedo face ive seen and actually liked. those flame ones are for flamers. :idiot:

s3gulit

07-18-2004, 10:08 PM

Thats exactly what my gauge cluster will look like in a couple of days (whenever my white needles arrive) Just have to make sure u wear the gloves included so u don't get those PITA finger marks on the stainless.

TNcowboyZ71

07-19-2004, 01:03 AM

camnut, do you have just the blue LED's and clear needles or did you also get a new gauge overlay? I really like the looks of the red.

camnut

07-19-2004, 06:13 AM

Originally posted by TNcowboyZ71
camnut, do you have just the blue LED's and clear needles or did you also get a new gauge overlay? I really like the looks of the red.

Correct, just the blue leds and clear needles, i dont have that overlay but it is kinda nice. No plans on getting one, those cost too much money imo. I am happy with stock, actually i had an escalade cluster i recently sold so if anything i would but one of those back in :D

Va'sFinest4x4

07-19-2004, 06:02 PM

Where do you guys get your clear needles?

camnut

07-19-2004, 06:38 PM

Originally posted by Va'sFinest4x4
Where do you guys get your clear needles?

I scraped off the orange on the original ones

macdon

07-19-2004, 08:25 PM

Looking good, I like the titanium looking finish.

GoCougs

07-19-2004, 10:51 PM

camnut,
What LED's did you order for your gauges. Also can you post a pic of what the stock gauges look like with the blue LED's and clear needles. Also how did you get the orange off of the needles.

Mitch

camnut,
What LED's did you order for your gauges. Also can you post a pic of what the stock gauges look like with the blue LED's and clear needles. Also how did you get the orange off of the needles.

Mitch

TNcowboyZ71

07-20-2004, 12:20 AM

I scraped off the orange on the original ones

:LOL: I never would have guessed that! Looks damn good though.

Also camnut, where did you get that bra for the hood of your truck? How much did you pay, and is that all its covers? Don't see those too often.

camnut

07-20-2004, 06:09 AM

Originally posted by GoCougs
camnut,
What LED's did you order for your gauges. Also can you post a pic of what the stock gauges look like with the blue LED's and clear needles. Also how did you get the orange off of the needles.

Mitch

6 of the T13-B6 for the instrument cluster
4 of the T1.5 for the a/c-heater

When i was changing the bulbs i pulled the needles off and just scraped the orange paint off them.

I will post a pic (sorry s3gulit not trying to hi-jack your thread) you can also click on my sig for pics....

http://memimage.cardomain.com/member_images/12/web/372000-372999/372112_110_full.jpg

Originally posted by TNcowboyZ71
:LOL: I never would have guessed that! Looks damn good though.

Also camnut, where did you get that bra for the hood of your truck? How much did you pay, and is that all its covers? Don't see those too often.

Funny you mention it, i was thinking about selling that thing. I got it from Checker auto parts, it covers only the edge of the hood like in my pics. I think it cost me around $30 maybe a little more?

psst....lol, dont call it a bra, its a hood protector :D :crazy:

Stabbin97Tahoe

07-20-2004, 04:08 PM

Looks good :rocking:

You can also see what mine look like...click on the Gauge Mod Tech Article Link down below in my Sig :D

Cleared the needles by scraping off the orange, and also did the A/C control panel with the blue leds.

GoCougs

07-20-2004, 06:52 PM

Wondering if you could get green LED's.

Tahoekid

07-20-2004, 09:35 PM

I know exactly what camnut is talking about. I had my needles off and you could tell that you could easly remove the orange look to them.

I didnt do it because I wanted to keep them orange so the Nu-Image flame panel I put in there looked right with the orange needles.

I must say, I really like this look too though.

Chris.

s3gulit

07-20-2004, 10:30 PM

hell your not hi-jackin my post man...i like to see that cool stuff as well. Could you tell me where you got the led's (or bulbs) you used for your a/c control panel? My truck theme is red/black on the interior so maybe theres a link?

Thanks in advance for the info camnut,
Dave

GoCougs

07-20-2004, 11:20 PM

6 of the T13-B6 for the instrument cluster

I looked on the Super Bright Led's web site and I couldnt find those bulbs. Also once you get the plastic dash cover off, how do you get the plastic off of the gauge's, and how hard is it to change out the bulbs. Would you be able to give me a step by step on how to do this install.

Stabbin97Tahoe

07-21-2004, 03:34 PM

Originally posted by GoCougs
I looked on the Super Bright Led's web site and I couldnt find those bulbs. Also once you get the plastic dash cover off, how do you get the plastic off of the gauge's, and how hard is it to change out the bulbs. Would you be able to give me a step by step on how to do this install.

Look in my signature...there you will find all the secrets in a nice little tech article I made up :read: :D :whatever:

berryjr

07-21-2004, 10:05 PM

s3gulit and Camnut I am really impressed with your work!

I actually logged on to see if I could see some examples of LEDs in the other interior lights ie doors, map lights, and maybe a/c lights.

Anyway, I am concerned that the dash might end up too bright. What do you think of the Single *inverted cone* LED Wedge Base Bulbs vs. the 6-bulb Wedge Based LED Car Bulbs that you used. The light from the single would be diffused, but not as bright.

What do you think? Single or 6 bulbs? I think they make 4s too.

(I would probably use the white style.)

Thanks,

Berry

http://www26.brinkster.com/johntotheberry/images/tahoe.jpg

And have you tried replacing your map lights with LEDs?

98cepektahoe

07-22-2004, 04:22 PM

damn camnut i hadnt ever seen that picture before very nice. quick question to everyone: anybody else have problems with the clear plastic that goes over the gauges being scratched all to hell? anybody have a remedy?

berryjr

07-22-2004, 04:54 PM

I have that problem too. I tried to clean the plastic once, and it scratched very easily. I don't clean it anymore except with an airhose, which is not very effective.

Berry

97Chebbie

07-22-2004, 05:09 PM

Looks nice, guys. Makes me want to put some red LED's in my dash. As always though, $$ won't allow right now.

PS: Welcome to the site, Berry.

98cepektahoe

07-22-2004, 05:26 PM

i may just end up getting another from the dealer but ill have to get ready to bend over if i go that route

berryjr

07-22-2004, 09:59 PM

Thanks 97Chebbie, glad to be here.

98cepektahoe, I casually asked a Chevy dealer if the plastic was sold as a unit with the rest of the dash. He said yes it was sold as a unit with the gauge faces... :(

I have just tried the single bulb inverted wedge in my map and door lights. It did not put out half as much light in either place. Now I need to try the 4 and 6 bulb configurations. Does anyone know of any retail outlets that may carry LEDs (in Tulsa)?

Thanks,

Berry

Incandescent vs. LED in the doors - sorry for poor pic.
PIC (http://www26.brinkster.com/johntotheberry/images/100_0004.JPG)

camnut

07-24-2004, 09:57 AM

Thanks for the compliments, been out of town this week....

berryjr, welcome to the site! I used the 6 leds cause at the time i was on superbriteleds website i couldnt find the 4 leds in blue (thought they got rid of them :dunno: ) would have prefer them though.

98cepektahoe, my plastic housing for the cluster is also scratched up, called the dealer they told me you cant get it.

98cepektahoe

07-24-2004, 02:46 PM

yeah i looked on their site the other day and couldnt find the blue 4-leds either :mad:

slammedchevy01

07-25-2004, 12:11 AM

the 1 led's will leave hot spots......any one do the A/C panel in a 99+?

s3gulit

07-25-2004, 12:11 AM

Berryjr,
Once i get my paycheck this monday all of the lights in my interior will be replaced with red LED's except for the maplights. So basically the doorlights, dome light, glovebox light, ac control lights and everything will be red. :D

Berryjr,
Once i get my paycheck this monday all of the lights in my interior will be replaced with red LED's except for the maplights. So basically the doorlights, dome light, glovebox light, ac control lights and everything will be red. :D

slammedchevy01

07-25-2004, 12:23 AM

the 1 led's will leave hot spots......any one do the A/C panel in a 99+?

the 1 led's will leave hot spots......any one do the A/C panel in a 99+?

fubu2

07-25-2004, 12:30 PM

both clusters are nice, but i really like that blue one. Can the same be done to a '92?

Devildog240

07-25-2004, 01:53 PM

those lok really tight.

blue_iquana

07-25-2004, 11:56 PM

What LED bulbs do I need to do the guages and the A/C unit in a 98 F/S? Thanks

camnut

07-26-2004, 07:11 AM

Originally posted by blue_iquana
What LED bulbs do I need to do the guages and the A/C unit in a 98 F/S? Thanks

I used T13-B6 for the intrument cluster and T1.5 for the a/c-heater cluster

You can also check out this tech article....
http://www.fullsizechevy.com/forum/showthread.php?s=&threadid=96579

berryjr

07-26-2004, 04:27 PM

I just bought:
Product: 3157-R12 Red LED bulb $ 3.99 (each) X4
Options: Wide Angle
Product: 3156-R12 Red LED bulb $ 3.99 (each) X4
Options: Narrow Angle
Product: RL-650 Load Resistor kit $ 4.95 (each) X2

I hope these work... Anyone Know exactly which electric/heavy-duty/variable flasher they bought and from where?

Product: WLED-6 LED bulb $ 2.99 (each) X14
Options: White 0.60
Product: WLED-W4 White LED bulb $ 2.59 (each) X14
Product: 3910 LED Festoon bulb $ 1.95 (each) X2
Options: White 1.50

from superbrightleds.com

The total was $150 but I will be returning most of them (30 day return policy).

This way I will have all my options(all interior minus the dash, brake/turn, tail, license plate) in one purchase.

I will try to document with pics as much as I can and post them ASAP.

Berry

Snafudilligad

07-26-2004, 04:54 PM

Originally posted by 98cepektahoe
damn camnut i hadnt ever seen that picture before very nice. quick question to everyone: anybody else have problems with the clear plastic that goes over the gauges being scratched all to hell? anybody have a remedy?

Go to a plastic store (like Tap Plastics) or someplace that will cut and works with plastics. They will have a very fine plastic polish (I have some at home and I forget the name but will post it when I find it) that will take out all the fine scratches and hazy look. Used it on my 96 monte carlo and it worked TITS.

It is a very mild clear plastic polish and you cant find it in auto stores. I've looked everywhere. Only in places that work specifically with plastics.

98cepektahoe

07-26-2004, 09:21 PM

Originally posted by Snafudilligad
Go to a plastic store (like Tap Plastics) or someplace that will cut and works with plastics. They will have a very fine plastic polish (I have some at home and I forget the name but will post it when I find it) that will take out all the fine scratches and hazy look. Used it on my 96 monte carlo and it worked TITS.

It is a very mild clear plastic polish and you cant find it in auto stores. I've looked everywhere. Only in places that work specifically with plastics.

sweet youre the man :head:

GoCougs

07-31-2004, 12:34 AM

OK I a so confused. I was thinking about doing this LED conversion on my gauges and AC panel, headlight panel, 4x4 panel. I think that I am going to go with green lights (Has anyone seen these lite before), I am looking at the SuperbrightLEDs.com page, and I can't see any bulb named a 194, or a T1.5. Can anyone help. Also what viewing angle did everyone use. What is that for. Would anyone be willing to make a list of what bulbs that I would need to get for this conversion. I drive a 1996 2 Door Tahoe 4x4. This would be very appreciated. Thanks

Mitch

camnut

07-31-2004, 08:10 AM

GoCougs, this is the page the T1.5 are on (i believe i used 4 of them for the a/c cluster) http://www.superbrightleds.com/cgi-bin/store/commerce.cgi?product=CAR&keywords=&cart_id=9847523.15055&next=50

The reason your not finding the 194 is cause the LEDS are numbered this way.....T13-G6 or WLED-G4 or WLED-G (i used the green leds for example since that is the color you want) Of course the "g" will change if you want a different color. I used 6 of the T13-B6(194) for my instrument cluster which are the blue LEDS.

The 4x4 push button is more difficult, i didnt do this on mine yet but it should take 5 total if you dont have autotrac, 2 of them are when you have the dash lights on and the other 3 would replace the push buttons when you activate them. They all require soldering. I was told the are the 74 bulbs.

I have looked at the headlight switch but i am still not sure which bulb it takes. Again, i was told it takes the 74 blub :think: This also wasnt as easy as the clusters so i left it alone.

Hope this helped....think i listed the ones you mentioned but there are still more bulbs in the clusters that can be changed, not sure if you want to change all of them? (like the warning lights, etc...)

GoCougs

07-31-2004, 11:09 AM

Thank you so much, I think that I am going to try and do this as soon I get get up to school in Aug. I am thinking that I am going to totally change out my instrument cluster and my AC cluster. I am thinking green because it will match my CD player, match the trucks color, and it will be easy to read at night. All in all, how much should I expect to pay for this set up. Will it be upwords of 100 bucks or less then that. Thanks again Camnut.

Mitch

camnut

07-31-2004, 11:27 AM

Your welcome Mitch....

I think i purchased between 10-15 bulbs, sorry dont remember exactly....again i am not for sure but i believe i payed no higher than $45 for all. But it also depends on which bulbs you go with....good luck with it!

GoCougs

08-02-2004, 10:45 AM

Ok I got another question. When you have to pull the needles off to get to the lights, do you pull the stopers off also. My tahoe has stopers on the RPM and MPH, couldnt you just lye the needle on the stopper when the engine is off and you would have the needle in the correct place.

Mitch

camnut

08-02-2004, 11:52 AM

Unless your changing the overlay, you shouldnt have to pull off the needles. Take out the 2 screws on each side of the cluster and pull out the bulbs on the back side that have ill next to them.

GoCougs

08-02-2004, 12:54 PM

What if you want to scrape the needles to be clear instead of orange

What is the difference in a 4 bulb light and a 6 bulb light. What works/ looks the best. Also is a T1.5 and a 74 bulb the same. Which one do I need for the Instrument and AC panel.

berryjr

08-02-2004, 01:08 PM

Here is a pic of the backside of my dash on my 99 Tahoe (It is marked as a 97 C/K Truck). I pulled out a couple of the bulbs. It appears to me that the colors do not indicate a different bulb.

Back of 99 Tahoe Dash (http://img.photobucket.com/albums/v407/berryjr/backofdash.jpg)

I have read different opinions, 1. the bulbs pull out of the the sockets and 2. the bulbs don't pull out of the sockets.
It seemed to me that they would not pull out, but maybe I did not pull hard enough.

The 18 or so bulbs was enough to encourage me to leave my dash alone.

Hope this helps,

Berry

camnut

08-02-2004, 01:11 PM

ohh...sorry, ya guess you will need to pull them off. Not sure if you have checked out this thread but it specifically talks about taking off the needles....http://www.fullsizechevy.com/forum/showthread.php?s=&threadid=61656

As far as the 4 or 6 bulb, i think you should be ok with the 4.....i was going to go with the 4 but like i stated before i couldnt find it on their website.

I used the T1.5 for the a/c cluster

GoCougs

08-02-2004, 01:21 PM

So basically I pull the gauges out and start pulling the old bulbs out and puting the new ones in. Also what size bulbs are in the lower left corner of the gauge? I think that I will go with the 4 LED instead of the 6. If you say that they will be bright enough and look good

Mitch

T13-G6 or WLED-G4 or WLED-G

What is the difference in these bulbs?

camnut

08-02-2004, 01:27 PM

Originally posted by GoCougs
So basically I pull the gauges out and start pulling the old bulbs out and puting the new ones in. Also what size bulbs are in the lower left corner of the gauge? I think that I will go with the 4 LED instead of the 6. If you say that they will be bright enough and look good

Mitch

Yes, they turn out but they where pretty hard to turn (at least mine were) Not sure about the lower corner your speaking of? I replaced only the bulbs with ill next to them.

Here is a pic of the 4's....so you be the judge if they look bright enough for ya...
http://memimage.cardomain.com/member_images/7/web/463000-463999/463390_13_full.jpg

The difference between
T13-G6=its a 6-LED Wedge Base Bulb
WLED-G4=its a 4-LED Wedge Base Bulb
WLED-G is single
G stands for green

GoCougs

08-02-2004, 01:36 PM

Thanks dude, your really helping out. Hey I thought that you had 6's in your tahoe not 4's. Also if you look at the picture that BerryJr. put in his post (its a link (Back Of 99 Tahoe Dash)) they are the really little ones on the lower left. They dont look like they twist but rather pull out.

Also did you do the warning lights, the cluster blinkers, the drvietrain lights, the airbag and seatbelt lights in your cluster.

berryjr

08-02-2004, 01:45 PM

All the bulb/bases twist out.

I could not remove the bulb from the base though.

camnut

08-02-2004, 01:50 PM

Yes, i have the 6's in mine that was a pic from another members Yukon. Now that i look at it, i think i am glad i went with the 6's. The lights look a little too dim for me....

The area in that corner doesnt light anything up :think:

Like i mentioned, i only changed the 6 bulbs that light up the cluster. I left the others cause i liked the different colors but you can change them.....

berryjr, you dont have to remove them from the base. You can order them already in a base.

http://www.superbrightleds.com/store/html/images/wled-b4.jpg

MandasHoe

08-04-2004, 10:50 AM

I ordered my bulbs last night. I think the cluster should be pretty simple. Im kinda eerie about pullin teh needles off cuz i installed some indiglos in my old civic and broke teh needles (no, they didnt pop off). Anyways, how much of a pain is it to do by the ac knobs? I got the bulbs for it, just didnt see anything here about installing them. Thanks In advance

addiction2bass

08-04-2004, 09:55 PM

i just put 6 green 6led bulbs into my dash and with alittle light it sucked but once it get dark i liked it alot beter! now i just need to scrap off my needles for a clear look :D i never thought about swaping the lights in the heater controls but that does look pimp!!!!!!!!!! i think ill do that next in acouple weeks. i gotta have a high power alt built with my next paycheck. mines already realy week. and thats without my amp. :( and i get my sub tomorow.LOL so its bound to go out VERY SOON!!!!!!!

GoCougs

08-05-2004, 02:35 AM

addiction2bass
Would you mind posting some pics of your lights at night. How do the green ones look. That would be greatly appreactiated. Thanks

Mitch

addiction2bass

08-05-2004, 10:01 PM

well keep in mind my camera SUCKS ASS!!!!!!!!!! it realy looks green i swear! LOL and its preaty even but of course its got those brighter spots in places. eventualy ill clear the dials but im doing one thing at a time.LOL

and i bought some sockets at autozone so i could just plug them in and roll. the ones in the dash are perminant ones preaty much. to much trouble to break the soldering joints and re solder the leds in! downfall is the sockets are like 3bucks each :( but well worth the quick plug and play!

addiction2bass

08-05-2004, 10:11 PM

2nd pic

addiction2bass

08-05-2004, 10:16 PM

last pic

GoCougs

08-05-2004, 11:39 PM

Ok, thanks that looks awsome. How bad are the hotspots with the 6 led lights. Also what do you mean by the sockets. I thought that the lights were just plug and play.

Mitch

camnut

08-06-2004, 06:07 AM

Originally posted by GoCougs
Ok, thanks that looks awsome. How bad are the hotspots with the 6 led lights. Also what do you mean by the sockets. I thought that the lights were just plug and play.

Mitch

My leds from superbright were just plug and play.

addiction2bass are those the 6leds? Do you have the dimmer turned down in the pic? It just seems like there are some real dark areas.......or maybe its just the camera :think:

stebob

08-06-2004, 10:11 AM

Camnut,

I LOVE that blue dash!!! I have a '97 Silvy I think I'm going to do the same thing on. Sorry to copy you but you've got something awesome there! :head: My dash should be the exact same as yours, I think. My question is on the A/C hot/cold selector knob, I don't see the red in your pic. Does it not show up anymore, or just can't see it? All you did was scrape your needles to clear and put in the blue LED's? THAT'S IT?? Man...totally sweet!

OH! Also, if you don't mind, I read that thread about removing the needles and putting them back on. Is that really necessary? Is that what you did? I don't see why you can't shut the truck off, pull them off and put them back on the same way. Am I missing something here?

camnut

08-06-2004, 01:29 PM

Originally posted by stebob
Camnut,

I LOVE that blue dash!!! I have a '97 Silvy I think I'm going to do the same thing on. Sorry to copy you but you've got something awesome there! :head: My dash should be the exact same as yours, I think. My question is on the A/C hot/cold selector knob, I don't see the red in your pic. Does it not show up anymore, or just can't see it? All you did was scrape your needles to clear and put in the blue LED's? THAT'S IT?? Man...totally sweet!

OH! Also, if you don't mind, I read that thread about removing the needles and putting them back on. Is that really necessary? Is that what you did? I don't see why you can't shut the truck off, pull them off and put them back on the same way. Am I missing something here?

Hey, no problem thats how we get our ideas...hell, i copied another member :D and yes you cannot see the red light up. I dont remember but could you even see it when the factory bulbs were in?

Ya, i just scaped off the orange and then put them back on. I was a dumba$$ and pulled the cluster out before taking them off, there still a little off but not too bad. It seem easy enough to do but i still wish i would have left it be, it really wasnt as easy as it seems :crazy:

I also took pictures of the needles before i pulled them. If you do it like you stated and keep track of where they are sitting when the engine is off you should be ok, but imo you just cant seem to get them back in the same exact spot.

stebob

08-06-2004, 01:54 PM

Very cool! Thanks!

So your needles were still had orange paint when you took that pic? Or, am I not understanding quite right?

Yes, I can see the red with the stock set up on the A/C heat/cool selector. Wonder why the blue LED's won't shine through. They seem bright enough... Hmph!

camnut

08-06-2004, 02:01 PM

stebob ...In the pic with the blue leds, the needles are clear and ya, i dont understand why the red doesnt show up even a little? I agee, you would think the bulb is bright enough?

stebob

08-06-2004, 02:25 PM

Rock on! Thanks, Camnut! I think I will be doing this here pretty soon! Looks great, dude! I couldn't stop staring at it and getting all excited when I saw it! :head:

Been looking on there and I don't see a T13-B6. The closest I saw was T13-UV6. Some kind of blacklight bulb that could possible be kick butt, too, but I don't wanna risk it. I like what you have. What am I missing here???

camnut

08-06-2004, 03:01 PM

Originally posted by stebob
Been looking on there and I don't see a T13-B6. The closest I saw was T13-UV6. Some kind of blacklight bulb that could possible be kick butt, too, but I don't wanna risk it. I like what you have. What am I missing here???

Ya, i dont know whats up with there site? Its like one day its there and a week later its not? :think:

I dont know what to tell ya.....maybe check back another day or if you can call them, thats probably your best bet.