Hood Release question and picture reqiuest

[LS6TT]

on the 95+ how is the hood release handle mounted?

is there like a spacer and it bolts to that

or is it just held on by two screws?


can somebody remove there kick panel and snap pictures, i prefer 1 facing towards the front of the truck, one facing the driver door and one facing back towards the cab (if possible)

Thanks

[Izzy]

I'll get pics, I need to install those gray kicks anyway.

[LS6TT]

coo

[dapolice1]

If you did not know the 95 up uses a diffrent ebrake assembly and handle than the 94 and older units. Just an FYI.

[LS6TT]

im looking just for the hood pop not the ebrake, my factory ebrake is fine as is

[dapolice1]

my bad.. i thought the hood release was apart of the ebrake mechanisim on the 95 and the trim panel was also diffrent...

[LS6TT]

not a problem, thanks for trying to help!

izz wheres my pics

[Izzy]

Didn't get a chance last night, gonna try today.

[LS6TT]

not a problem bro..

[LS6TT]

cool deal thanks!

[LS6TT]

just got your email awsome thanks

curious question is there a nut behind there or does t just bolt into that hole

[dapolice1]

Hey Alex,
I was right the hood release on the 95 up is on the inner kick panel and the actual assembly is diffrent from the <94. The actual panel is diffrent as well. I am not sure what your doing but it is diffrent. I looked at mine today to make sure I wasn't crazy....

[LS6TT]

o i know, im getting 95+ kick panels, handle and the cable, they go through the firewall on the same spot and the latch is the same so it should be pretty easy to do..

thanks for everybodys help