96 fullsize silverado and airride parts for sale

[shady4evr]

IM looking to get rid of somethings on my truck and get rid of the truck in general due to some unforseen expenses... so here goes.. i will get pics of all the products and the truck if you want them just let me know. also i am in ohio so shipping from zip 44515 would be good for all you guys.. and if you want the truck i will have to insist pickup from my house here in ohio.

thanks.

here goes the list of things

KENWOOD KHD-C710 10 GB MUSIC KEG JUKEBOX $100

20 INCH FERRETTI VISCONTI RIMS 903 with tires (1 tire needs replaced later on down the road it has some wear on it) $1500 tires are 255/35/r20

(2) AUDIOBAHN AW1251T 800W RMS 12inch subs $50 bucks for both

suicidedoors 12gallon 8 port tank $50 you pick up shipping

4- 1/2in danz 12volt valves for airride $125 for all of them

4- 3/8in smc dump valves for airride $100 for all of them

1/2 parker watertrap (this isnt a 1/8 port or anything its 1/2 port) $50 +shipping

york air compressor with all the fittings and 1/2 airconditioning line 8ft of that and brackets for a vortec 96-99 with airconditioning fullsize chevy truck $150 (the air conditioning hose cost $80 bucks alone plus the fittings and everything else.

alternator pulley for engine driven compressor $30+shipping its the double groove pulley to run a single belt to the compressor so you dont have to run another serpentine belt

extensive metalworks 2link with panhard bar $300 with bags mouted to the link bars for max lift

if someone was to offer me 8000 for the whole truck as is with nothing taken off the truck i would take it in a heartbeat.. also the truck is a 96 xtended cab 2wd v8... first year of the vortec... if you want to know more let me know by email me at bagged4loks@gmail.com for any picture requests and also call my cell at 330-233-2742 if you have any questions of this matter. thanks.
dave

[IH8FORD]

i call dibs on the engine driven. let me count my funds and i will pm you tommorow

[shady4evr]

sounds good let me know what you want when it comes to the brackets, the compressor, the air conditioning line and the oil water seperator.. along with all the fittings it has on it..

[shady4evr]

bumpity bump... lol i guess im impatient

[IH8FORD]

never mind man im going to pass on the engine driven good luck with the sale.

[addiction2bass]

picture of the "alternator pulley for engine driven compressor $30+shipping"
i wanna do a dual alternator setup and i hope this will work if it will fit my 95 alt which is why i need a picture and how many groves are in the pulley?
pics to addiction2bass@yahoo.com

id like to call dibs on it. i hope its got the same grove count as mine does!

[shady4evr]

go to www.onboardair.com and go to the engine driven compressor part and look for there pullies.. it is in there..

thanks.
dave

[addiction2bass]

so it is the 6grove pulley and then goes to a V belt? if so i want it... shiped to 46112?

[shady4evr]

yeah its that one... let me find out what is goin on with selling the truck as a whole first and ill let you know.. shoot a message to me at shady4evr2216 on aim and ill let you know when and if i can get rid of it..

thanks.
dave

[Kruznlow69]

which york are you using? is it the 210? custom bracket?

[shady4evr]

its the 210 with a custom built bracket i fabbed and powdercoated...

[shady4evr]

anyone else? anything...

[AntiBling]

Is that $100 shipped for the 4 SMC Valves?

[shady4evr]

you pay shipping.. i want 100 + shipping...also let me find out what is goin on with selling the truck as a whole first and ill let you know.. shoot a message to me at shady4evr2216 on aim and ill let you know when and if i can get rid of it..

thanks.
dave

[shady4evr]

ok... so i wanna sell the truck..... 6 grand without the stereo... that means 5 grand in airride.. 3 grand in wheels and tires and the truck for whatever it is worth.. so over 10 grannd in stuff for only 6 grand... lemme know.. i wanna really get rid of the truck.. im sick of it.. help me out..

dave
any takers? email me at bagged4loks@hotmail.com

[MikenLex]

pics of the wheels?

[shady4evr]

whats your email addy ill send the pics to you.

thanks.
dave

[c.nash]

Pics of the truck?

[shady4evr]

If You Guys Want Pics Of The Truck I Can Send Them To You.. I Have 12 Of Them I Will Send At Once. If Someone Can Resize Them For Me And Post Them That Would Be Awesome.

Thanks.
Dave

[shady4evr]

http://www.mautofied.com/default.asp?NavX=M2&Results=Detail&PKID=100018130

thats a link to the truck also..

thanks.
dave

[addiction2bass]

im just curious to see the truck.....
already seen that site ;)

[shady4evr]

anyone know how to shrink pics down to make them fit in the required kb range for the forum so i can post them? any programs out there i can do that with?

thanks.

[addiction2bass]

easiest way to do it is go make a sounddomain page and upload the pictures thier and simply post links to the pictures :D

[Cheve11e]

So, do you still want to sell the -4- 3/8in smc dump valves for airride $100 for all of them? Thanks

[ARVCUBE]

how much for the 210 bracket? any pics?

[shady4evr]

i would rather just sell the whole truck as is... instead of parting it out...

[twiztid92chevy]

please send pics to

Twiztid92chevyATverizon.net

My truck is about to get totaled out and I may be interested while mine is being repaired after the buy back.

[shady4evr]

pics sent please post them up on here if you can that would be awesome. thanks.

dave

[twiztid92chevy]

you did change AT to @ right? I have not recieved them yet

[shady4evr]

resent pics.. had an error the first time cuz there were soo many pics i tried to send to you.. i guess your inbox didnt like me.

['95-Silverado]

Just curious as to why you're sick of the truck? from the linked picture in your last post, it looked like it was comin along well.. Are you just sick of gas prices? If so, I understand that, but it was a damn nice truck.. anyway, free TTT for you for a nice truck and Good luck on selling it. If I had to dough, i'd take it in a heartbeat! =)

[shady4evr]

Just curious as to why you're sick of the truck? from the linked picture in your last post, it looked like it was comin along well.. Are you just sick of gas prices? If so, I understand that, but it was a damn nice truck.. anyway, free TTT for you for a nice truck and Good luck on selling it. If I had to dough, i'd take it in a heartbeat! =)

if i keep the truck which looks like i will.. i am going to rip the whole truck apart and start over.. making it just like i want it.. and bodydrop it.. along with another motor and goodies... hopefully soon here in the next week or so i will start working for summit racing... that will be fun. also i will strip the whole truck down to bare metal and start over and just take my time doing everything i want to do to it.. metal dash smooth floors, new fiberglass stereo. lots of goodies.. nothing will be plastic at all. everything will be exactly the way i want it without sparing the expense.

[twiztid92chevy]

Dude, you got one of the front? and maybe in the primer you mentioned? Nice looking but I dunno if I'd pay the 6K you want. heres the pics he sent me...

[shady4evr]

http://img.photobucket.com/albums/v280/shady4evr/Picture121.jpg
http://img.photobucket.com/albums/v280/shady4evr/Picture120.jpg
http://img.photobucket.com/albums/v280/shady4evr/Picture119.jpg
http://img.photobucket.com/albums/v280/shady4evr/Picture118.jpg
http://img.photobucket.com/albums/v280/shady4evr/Picture117.jpg
http://img.photobucket.com/albums/v280/shady4evr/Picture116.jpg
http://img.photobucket.com/albums/v280/shady4evr/Picture115.jpg
http://img.photobucket.com/albums/v280/shady4evr/mytruck.jpg
http://img.photobucket.com/albums/v280/shady4evr/mytruckpepsi.jpg
http://img.photobucket.com/albums/v280/shady4evr/truck_pic_23.jpg
http://img.photobucket.com/albums/v280/shady4evr/IMG10.jpg
http://img.photobucket.com/albums/v280/shady4evr/IMG09.jpg
http://img.photobucket.com/albums/v280/shady4evr/IMG08.jpg