18" Rozzi Chambers w/ Toyo Proxes S/T's

[shakey]

I'm selling my 18" Rozzi Chambers on 255/55/18 Toyo Proxes S/T's. They're 5x5 and fit with very little rubbing on a 4/6 drop. They aren't in perfect shape but are in good shape. There is a small spart of curb rash on one wheel, about 2" long and 1/4" wide. I will include an extra used tire with about 50% life left. as far as the ones on the wheels, two should most likely be replaced, my upper control arm came loose and messed up the outer edge. the other two tires are practically new, less then 5000 miles, half of that is highway driving.

*Edit*

Note: the pictures are rather large, i wanted them to be detailed for you guys. The picture of the curb rash didn't come out, so i'll try again tomarrow.

After going over the wheels and finding some other things (not major but annoying) i've decided to lower the price to $700.

Heres the pictures:
http://myweb.cableone.net/calvinsusanreed/DCP_0376.jpg
Two Tires look like this, almost new, about 3500 miles on them, mostly highway.
http://myweb.cableone.net/calvinsusanreed/DCP_0378.jpg
Heres one of the annoying things i found, two wheels rubbed the LCAs. The marks arent deep, but they're all the way around, its on the back side, and isn't visible.
http://myweb.cableone.net/calvinsusanreed/DCP_0379.jpg
I just found this today, and it really pisses me off, Firestone used a standard weight on the back side of one wheel when they patched a tire. :twak:
http://myweb.cableone.net/calvinsusanreed/DCP_0385.jpg
The other wheel with the rub on the inner lip.
http://myweb.cableone.net/calvinsusanreed/DCP_0386.jpg
This is the worst tire, the outer edge is wore pretty badly, this is the side the UCA came loose.
http://myweb.cableone.net/calvinsusanreed/DCP_0387.jpg

[shakey]

bump!!!

[lowryder99]

Not to whore your post but those wheels would be 5x5 I believe not 5x5.5

[the_duke]

5x5.5 is for a ford i think. any pics of the blemishes and the scrape?

J.W.

[shakey]

Not to whore your post but those wheels would be 5x5 I believe not 5x5.5

your right, i ment 5x5, my bad.

the_duke: i'm in the airport getting ready to fly out of idaho for ohio, so as soon as i get to ohio and get them cleaned, i'll take pictures of everything i can find. i should have it done by sunday.

[shakey]

common guys! $700 OBO Help me out

[halfAhoe]

I cant read the backspacing in any of those pics, what is it?

[Otto]

pm sent! hopefully we can make this work soon!

[gmc9097]

how would they look on a stock height truck?

[the_duke]

well, my nympho doesn't wanna move out, so it might take me a bit, but if you've still got them, i'll start to save up some cash. replace one joy with another i guess.

J.W.

[leitchfield]

could you send over pics of these wheels on your truck to donovand@rbtsi.com I am in kentucky and would be willing to travel if a deal is struck. thanks.

[shakey]

BUMP!!

PM's and email sent, i'm not sure how they would look on a stock height truck, they have a fair amount of tire on them.

[Larry B]

Where exactly did they rub.

[shakey]

The back rubs only when the truck is heavily loaded down, it will rub the wheel well slightly. On the front the fender lips will need rolled but because of how much tire there is the front will rub the inner fender when the suspension is compressed a lot.