removing door pannels

[Nickleahy23]

i am trying to remove my door pannels on my 1992 chevy. it has crank windows and thats where my problem lies. i cant get the crank to pop off. i got everythign else loose thats the only thing holding it in. if anyone knows how to get that off please let me know. thanks alot

[kenman1717]

i am trying to remove my door pannels on my 1992 chevy. it has crank windows and thats where my problem lies. i cant get the crank to pop off. i got everythign else loose thats the only thing holding it in. if anyone knows how to get that off please let me know. thanks alot

there is a little c clip around the rod which has to come off, i think there is a tool for this, but if you have a small flat screwdriver that will work. when you pop it out be careful its small and you could loose it. there is a couple threads on removing door panels with window cranks in the tech articles section, that may help.

[DjLunchbox]

yup, jsut about any auto part store should carry a window crank removal tool. under 10.00

usually, you will want to slide the tool behind the handle and the clip will pop off while you wiggle the handle . in other words. if the little part that your hand holds is at the 12 o clock position, you will force the tool down behind the handle from 12 o clock to 6 o clock. straight down. does that make sense?

[Nickleahy23]

alright thanks ya i was looking for that clip but i guess i didnt really spend enough time on it thanks again

[Toolman]

alright thanks ya i was looking for that clip but i guess i didnt really spend enough time on it thanks again

I have used a screw driver to remove the clip in the past.