phatchevy06
04-26-2006, 11:22 PM
Well, I removed my body kit from my '97 and now it has to go. It's only been used on the truck for 3 months since it was brand new. Should fit fine on any 88-98 Full-Size Ext. Cab but like mentioned, I removed it from my '97. I'm looking to get $300 for the entire 4pc. kit. This kit is a "FULL" body kit which includes the fender trim for all 4 wheel wells...please look at the pictures to understand this more efficiently. It is manufactured in the USA by Go Industries. I'm currently not shipping it anywhere due to the hassle of shipping freight and my location. It is available for local pickup so my zip code is 27855. I'm in the Northeastern part of NC. There are slight paint defects on some spots on the kit but other then that it's flawless. I'm 99.9% sure whoever buys it will have to repaint it anyway so the paint defects aren't even a problem to consider. I will also include the necessary screws to install the kit. You may PM me or contact me at my e-mail address which is chevydriver06@aol.com with any questions/concerns. Thanks for looking, Jeremy.
http://i42.photobucket.com/albums/e340/phatchevy06/PICT0138.jpg
http://i42.photobucket.com/albums/e340/phatchevy06/PICT0130.jpg
http://i42.photobucket.com/albums/e340/phatchevy06/PICT0129.jpg
http://i42.photobucket.com/albums/e340/phatchevy06/PICT0128.jpg
http://i42.photobucket.com/albums/e340/phatchevy06/PICT0126.jpg
http://i42.photobucket.com/albums/e340/phatchevy06/PICT0124.jpg
http://i42.photobucket.com/albums/e340/phatchevy06/PICT0123.jpg
http://i42.photobucket.com/albums/e340/phatchevy06/PICT0122.jpg
http://i42.photobucket.com/albums/e340/phatchevy06/PICT0121.jpg
ALSO UP FOR GRABS
I also removed my aftermarket airdam that has also only been on the truck for 3 months since purchase and installation. The airdam features 2 fog light holes that would look great w/ 3'' fog lights. Also manufactured in the USA by Go Industries. I'm looking to get $75 for this airdam. Only defects are that the bottom of the fog light holes have been scratched and rubbed from road use. The middle is also slightly like this. It is smooth and only needs paint to hide. Of course, once again I'm 99.9% sure you'll have to paint the airdam so this doesn't raise much issue. See the pictures to find out what the defects look like. This airdam will also be available for local pickup only so see my first set of details for the body kit with my zip code and contact information. Thanks again, Jeremy.
http://i42.photobucket.com/albums/e340/phatchevy06/PICT0131.jpg
http://i42.photobucket.com/albums/e340/phatchevy06/PICT0133.jpg
http://i42.photobucket.com/albums/e340/phatchevy06/PICT0132.jpg
http://i42.photobucket.com/albums/e340/phatchevy06/PICT0135.jpg
http://i42.photobucket.com/albums/e340/phatchevy06/PICT0137.jpg
If your interested in buying the complete setup...please contact me as I will have a special deal for you :D
Here's a look at this kit when it was installed on my '97.
http://i42.photobucket.com/albums/e340/phatchevy06/Pic1.jpg
http://i42.photobucket.com/albums/e340/phatchevy06/Pic2.jpg
http://i42.photobucket.com/albums/e340/phatchevy06/Pic4.jpg
http://i42.photobucket.com/albums/e340/phatchevy06/Pic6.jpg
Thanks a lot guys! :cool:
http://i42.photobucket.com/albums/e340/phatchevy06/PICT0138.jpg
http://i42.photobucket.com/albums/e340/phatchevy06/PICT0130.jpg
http://i42.photobucket.com/albums/e340/phatchevy06/PICT0129.jpg
http://i42.photobucket.com/albums/e340/phatchevy06/PICT0128.jpg
http://i42.photobucket.com/albums/e340/phatchevy06/PICT0126.jpg
http://i42.photobucket.com/albums/e340/phatchevy06/PICT0124.jpg
http://i42.photobucket.com/albums/e340/phatchevy06/PICT0123.jpg
http://i42.photobucket.com/albums/e340/phatchevy06/PICT0122.jpg
http://i42.photobucket.com/albums/e340/phatchevy06/PICT0121.jpg
ALSO UP FOR GRABS
I also removed my aftermarket airdam that has also only been on the truck for 3 months since purchase and installation. The airdam features 2 fog light holes that would look great w/ 3'' fog lights. Also manufactured in the USA by Go Industries. I'm looking to get $75 for this airdam. Only defects are that the bottom of the fog light holes have been scratched and rubbed from road use. The middle is also slightly like this. It is smooth and only needs paint to hide. Of course, once again I'm 99.9% sure you'll have to paint the airdam so this doesn't raise much issue. See the pictures to find out what the defects look like. This airdam will also be available for local pickup only so see my first set of details for the body kit with my zip code and contact information. Thanks again, Jeremy.
http://i42.photobucket.com/albums/e340/phatchevy06/PICT0131.jpg
http://i42.photobucket.com/albums/e340/phatchevy06/PICT0133.jpg
http://i42.photobucket.com/albums/e340/phatchevy06/PICT0132.jpg
http://i42.photobucket.com/albums/e340/phatchevy06/PICT0135.jpg
http://i42.photobucket.com/albums/e340/phatchevy06/PICT0137.jpg
If your interested in buying the complete setup...please contact me as I will have a special deal for you :D
Here's a look at this kit when it was installed on my '97.
http://i42.photobucket.com/albums/e340/phatchevy06/Pic1.jpg
http://i42.photobucket.com/albums/e340/phatchevy06/Pic2.jpg
http://i42.photobucket.com/albums/e340/phatchevy06/Pic4.jpg
http://i42.photobucket.com/albums/e340/phatchevy06/Pic6.jpg
Thanks a lot guys! :cool: