Podz0r
09-01-2006, 11:07 AM
For sale
88 silverado, reg cab, stepside, 350+.040, 700r4,
A little history. The truck was rebuilt from ground up about 10 years ago. At that time the entire frame, axels and suspension where powder coated,
-It has a 3" rough country lift and 2" body lift. Steelbraided brake lines, 33" BFG AT's on american racing 15x10" wheels, toneau cover, kenwood headunit, grant steering wheel, rock chip paint/protection all around the bottom of the body
-since I have owned it I have done a TON of work including
Rebuilt 350 .40 over (currently has less than 10k miles)
rebuilt trans (less than 500) miles
rebuilt rear diff. (did with motor)
Rebuilt front diff,
cv shafts,
tie rods,
idler and pitman arms,
ball joints,
New exhaust with twister muffler(circle track muffler (sounds good)),
Rancho front shocks
Window switches,
Cab corners,
So all in all this truck is perfect mechnical condition, The only rust on the truck is on the gas door and the drivers side mirroe. other than that the truck was in a VERY VERY VERY MINOR accident. The pass. side door was dented below the molding (can kinda see in pics) and the rocker pannel was dented in. I pushed most of the door dent out so it's basically just a little scuffed (rock chip paint hides a lot of it).
Asking $4300 OBO
if you have any questions email ACdye68@yahoo.com or call Mike at 616-893-2445
http://img.photobucket.com/albums/v329/ACdye68/IM000853.jpg
http://img.photobucket.com/albums/v329/ACdye68/IM000854.jpg
http://img.photobucket.com/albums/v329/ACdye68/IM000855.jpg
http://img.photobucket.com/albums/v329/ACdye68/IM000856.jpg
http://img.photobucket.com/albums/v329/ACdye68/IM000859.jpg
I also have a match pair of 78 ford f 250 axels, HP D44 front and FFD60 rear. I was gonna do a SAS but ran out of time and money. $500
88 silverado, reg cab, stepside, 350+.040, 700r4,
A little history. The truck was rebuilt from ground up about 10 years ago. At that time the entire frame, axels and suspension where powder coated,
-It has a 3" rough country lift and 2" body lift. Steelbraided brake lines, 33" BFG AT's on american racing 15x10" wheels, toneau cover, kenwood headunit, grant steering wheel, rock chip paint/protection all around the bottom of the body
-since I have owned it I have done a TON of work including
Rebuilt 350 .40 over (currently has less than 10k miles)
rebuilt trans (less than 500) miles
rebuilt rear diff. (did with motor)
Rebuilt front diff,
cv shafts,
tie rods,
idler and pitman arms,
ball joints,
New exhaust with twister muffler(circle track muffler (sounds good)),
Rancho front shocks
Window switches,
Cab corners,
So all in all this truck is perfect mechnical condition, The only rust on the truck is on the gas door and the drivers side mirroe. other than that the truck was in a VERY VERY VERY MINOR accident. The pass. side door was dented below the molding (can kinda see in pics) and the rocker pannel was dented in. I pushed most of the door dent out so it's basically just a little scuffed (rock chip paint hides a lot of it).
Asking $4300 OBO
if you have any questions email ACdye68@yahoo.com or call Mike at 616-893-2445
http://img.photobucket.com/albums/v329/ACdye68/IM000853.jpg
http://img.photobucket.com/albums/v329/ACdye68/IM000854.jpg
http://img.photobucket.com/albums/v329/ACdye68/IM000855.jpg
http://img.photobucket.com/albums/v329/ACdye68/IM000856.jpg
http://img.photobucket.com/albums/v329/ACdye68/IM000859.jpg
I also have a match pair of 78 ford f 250 axels, HP D44 front and FFD60 rear. I was gonna do a SAS but ran out of time and money. $500