96 silverado seats

[high rider]

I have a 91 silverado and was wondering if seats from a 96, the one with a flip down center console would fit my truck and what would i have to do to get them in there.

[BrettD]

I have a 97 reg cab. I removed the bench and gave it to a friend
that installed it in a 91 reg cab, bolted right in.
Then I took 2 buckets from a 98 tahoe and installed them in place of my bench. If you can get seats at a good price all you need to do is dril through the floor if they dont line up ,be careful not to drill into anything underneath the truck,then nut and bolt them.The out side studs will prob line right up.
The wiring is basic 12 volt if your going from manual to power