PDA

View Full Version : 99-06 hidden hitch

onefastz71
02-19-2007, 07:05 PM
Guys I've got a hidden hitch thats about 6 months old that I bought for my truck but have changed my mind. It is powdercoated with the hammertone finish. In great shape. Looking to get 100 plus shipping. I will get pics up tomorrow after work.
onefastz71
02-20-2007, 10:57 PM
I've got the pics but I can't get them on the forum. If you would like pics please leave me your email and I will email them to you.

Thanks Rick
onefastz71
02-21-2007, 06:52 PM
http://img253.imageshack.us/img253/3815/dsc00093hk7.jpg
onefastz71
02-24-2007, 04:22 PM
bump offers?
mabutler
03-01-2007, 08:19 AM
Did you run this with your body lift?
RassyMX
03-01-2007, 01:58 PM
Did you run this with your body lift?


:dunno: Id also like to know.
onefastz71
03-02-2007, 07:53 AM
I was going to but I was looking at it and it doesn't look like it will fit. I had heard that it would and seen pics of it working on another forum, but it sat up behind my bumper a little. I then measured my lift blocks and they are only 2". I think that with a 3" kit it would clear. This also explains the prublem with my rubbing on my 33" and most everybody else I've seen on here clears them with a little trim.
mabutler
03-02-2007, 08:54 AM
I'm still interested in it, but want to see if you can get me some measurements so that I can try to figure out if it will work. It looks like the bottom of the actual reciever is flush with the bottom of the frame, is this correct? If not, how much below or above does it sit? Also can you get me a measurement from the rear most bolt hole on it to the front of the reciever? I think that will let me know if it will work on mine or not. Thanks.
kdirectorate
03-02-2007, 10:12 PM
Unless someone else has called dibs, I'm very interested. What's the shipping to 98499?
fa1se-1mage
03-03-2007, 10:41 AM
what brand? what class hitch is it? how much is shipping to 73503? any hardware with it?
Black06
03-04-2007, 12:19 AM
will this work with a stock bumper?
onefastz71
03-05-2007, 06:57 PM
The top of the receiver is flat with the bottom of the frame. and it is about 10" from front to center of the rear bolt hole.
kdirectorate
03-05-2007, 10:07 PM
No, it will not necessarily work with the stock bumper. I imagine you could mount it no problem, but you wouldn't have access to the receiver. Hidden hitches are made to tuck behind a roll pan.

Sorry I haven't replied to your PM. I am still very interested, but finances got unexpectedly tight in the last couple days. I'll pm you after I get situated to see if it's still available.
mabutler
03-06-2007, 08:42 AM
I'm going to buy one locally because it will be cheaper, but thanks anyway.
rowdyruss
03-09-2007, 02:35 PM
shipping to 44691 if you still have it