2007 NBS Silverado Door Panels

[EBMX66]

Can anyone give me instructions or a link on how to remove the door panels in an 07 silverado???

i have been looking everywhere and can't find any....my secondskin came today and i am itching to put it in but cant get the door panels off grrrrrrr

[Trory]

Do you have a LTZ or LT1/LT2?

I replaced my door handles with painted ones last weekend and it was a breeze. I have the LT2 version so here is what I did.

The fronts are a little more complicated than the rear door pannels but either are simple. The fronts all you have to do is pop off the triangle piece on top of the pannel. There is a clip on each corner and they are really sturdy. The doot pannels you have to pop out the plasitc pop in pieces behind the handle and arm rest to undo the bolts behind them. Then on the verticle handle piece the painted piece pops of from the bottom and then pulls out from there ( there should eb a groove on the bottom to put a screwdriver in to start it. After that start from the bottom and pop the door pannel off and lift it off of the window ledge. If you need to PM me and I will give you my cell phone number to wlak you through it. Later

[EBMX66]

thanks with ur help i got it off and then i realized that i am going to have to pay a shop to do it because i could hardly get past the simple part and i just dont have enough time.....thanks!!!

[Trory]

Any time! Where did you get teh second skin at?

[EBMX66]

their web site i figured it was a better deal then buying dynamat from a shop