supraloud84
11-09-2007, 09:03 PM
http://i176.photobucket.com/albums/w171/supraloud84/truck.jpg
http://i176.photobucket.com/albums/w171/supraloud84/083107_17221.jpg
http://i176.photobucket.com/albums/w171/supraloud84/082907_12591.jpg
Hey guys. This truck has been my pride and joy project for the last two years but the time has come that other financial responsibilities call first. First of all the truck is a 92 silverdo ecsb, pw, pl, auto, 2wd, with a 305. It has 276k on it ( I know its ALOT of miles. I was told it has had the motor replaced but I dont know at what mileage. Now for what I have done to the truck. It has a brand new paint job on it that was done at a local shop owned by a very good friend of mine. It is black with blue pearl in the base coat so the truck has a blue tint to it when it sits in the sun (very cool affect imo) It has tribal graphics down both sides of the truck and on the hood in a dark blue accentuated with alsa crystallizer effect. It has a color matched work truck bumper on the front end along with a carriage works black phantom grill insert. All the lighting in the front end is blacked out with black projector headlights, black background marker lights, and tinted corner lights. As far as new and or replaced sheet metal, both front fenders and the drivers door are brand new, the cab corners have been replaced. the bed was bought in Florida and is off of a 98. All of the brakes have been replaced on the truck and so has the center carrier bearing for the drive shaft. As for the wheels, they are brand new as well Incubus paranormal 22s with a black and machined finish on them wrapped in wanli 265/35-22" rubber. I have a set of steel wheels for the truck as well. As for what the truck needs. As far as I know the only things it needs are an intake gasket (which I have the whole top end gasket kit for the truck that is included), and a oil pan, which has a pin hole in it that is making it leak. There is no roll pan as I could not decide which style I wanted to go with. I apologize for the crappy cell phone pics, I will take a bunch of pics with the camera tomorrow and get them posted. AS I said before This was my pride and joy and it kills me to sell it. I had every intention of dropping it 4-6 and driving the hell out of it. I unfortunately have not driven the truck anywhere but home from the paint shop since it was painted. I haven't had the time or the money for the intake and oil pan repair. I am am asking $4800 or best offer for the truck. Any response or comments are appreciated. If you have any questions please fell free to call me. my cell phone number is 716-870-0217. I may be willing to deliver the tuck if it sells for the right price.
http://i176.photobucket.com/albums/w171/supraloud84/083107_17221.jpg
http://i176.photobucket.com/albums/w171/supraloud84/082907_12591.jpg
Hey guys. This truck has been my pride and joy project for the last two years but the time has come that other financial responsibilities call first. First of all the truck is a 92 silverdo ecsb, pw, pl, auto, 2wd, with a 305. It has 276k on it ( I know its ALOT of miles. I was told it has had the motor replaced but I dont know at what mileage. Now for what I have done to the truck. It has a brand new paint job on it that was done at a local shop owned by a very good friend of mine. It is black with blue pearl in the base coat so the truck has a blue tint to it when it sits in the sun (very cool affect imo) It has tribal graphics down both sides of the truck and on the hood in a dark blue accentuated with alsa crystallizer effect. It has a color matched work truck bumper on the front end along with a carriage works black phantom grill insert. All the lighting in the front end is blacked out with black projector headlights, black background marker lights, and tinted corner lights. As far as new and or replaced sheet metal, both front fenders and the drivers door are brand new, the cab corners have been replaced. the bed was bought in Florida and is off of a 98. All of the brakes have been replaced on the truck and so has the center carrier bearing for the drive shaft. As for the wheels, they are brand new as well Incubus paranormal 22s with a black and machined finish on them wrapped in wanli 265/35-22" rubber. I have a set of steel wheels for the truck as well. As for what the truck needs. As far as I know the only things it needs are an intake gasket (which I have the whole top end gasket kit for the truck that is included), and a oil pan, which has a pin hole in it that is making it leak. There is no roll pan as I could not decide which style I wanted to go with. I apologize for the crappy cell phone pics, I will take a bunch of pics with the camera tomorrow and get them posted. AS I said before This was my pride and joy and it kills me to sell it. I had every intention of dropping it 4-6 and driving the hell out of it. I unfortunately have not driven the truck anywhere but home from the paint shop since it was painted. I haven't had the time or the money for the intake and oil pan repair. I am am asking $4800 or best offer for the truck. Any response or comments are appreciated. If you have any questions please fell free to call me. my cell phone number is 716-870-0217. I may be willing to deliver the tuck if it sells for the right price.