1967 Chevy 3/4 ton 4x4 for trade or sale

[possom813]

Sold

[possom813]

Now Only $1600.00

[johns74gmc]

Can You Send Me Some More Pics Of The Truck

[possom813]

Update because it's almost finished and for sale again.

For Sale is a 1967 Chevy 4x4. It's been listed before, but it was in pieces. Now it's together.

It is a 1967 Chevy pickup on a late 70's early 80's running gear. It has a good 350 engine with standard transmission. I believe it has an edelbrock intake, but I'm not certain at this time because I forgot to verify it earlier.

The tires are 36" Goodyear with decent tread. They'll still pass inspection.

Aluminum rims.

14 bolt full floater rearend and 10 bolt corporate up front. 3.73 gears in both ends.

NP 205 Transfer case.

All new power steering stuff, new steering gear, hoses and pump.

It needs a battery, the one that's on it won't hold a charge for crap. If you've got it running and it dies you can start it right back up, but if it sits for more than a couple of minutes the battery is dead again.

It also needs a windshield, I think. The glass is cracked and I've been told a couple of different things on whether it would pass inspection or not with it. I'm not sure if it will or not. I haven't tried to get it inspected yet because I'm out of cash to work on it.

It needs two more tail lights to use for brake lights. The switch and wires are ready, it just needs a couple of more lights. I have no more cash.

I have the heater/blower stuff, it's not put in because the heater core was bad and I haven't bought a new one yet due to no more cash.

I would hesitate to drive this any significant distance until the oils are changed and filled up. I have owned it for about 3 years and it's been under construction most of that time and I haven't changed any oils but the rear end, but it's also only been fired up and driven around the block a handful of times.

It also has a new carrier bearing, had I known the pain in the butt that was going to be I would have found a one piece driveshaft to use instead of the two piece.

That's all I can think of about it. I wouldn't drive this thing on the highway with the tires that are on it because the tire shop said they couldn't balance them because they are bias ply? The wife had them mounted so I'm not sure what they were talking about.

That's about it, come buy my truck or trade me something for it.

http://i86.photobucket.com/albums/k96/possom75110/67%20Chevy/IM000314.jpg

http://i86.photobucket.com/albums/k96/possom75110/67%20Chevy/IM000316.jpg

http://i86.photobucket.com/albums/k96/possom75110/67%20Chevy/IM000315.jpg

http://i86.photobucket.com/albums/k96/possom75110/67%20Chevy/IM000313.jpg

http://i86.photobucket.com/albums/k96/possom75110/67%20Chevy/IM000312.jpg

http://i86.photobucket.com/albums/k96/possom75110/67%20Chevy/IM000311.jpg

http://i86.photobucket.com/albums/k96/possom75110/67%20Chevy/IM000310.jpg

http://i86.photobucket.com/albums/k96/possom75110/67%20Chevy/IM000308.jpg

http://i86.photobucket.com/albums/k96/possom75110/67%20Chevy/IM000317.jpg


***************************************************************************************
The above are pics of it as it is now. The below are pics of before I put it together.
***************************************************************************************



http://i86.photobucket.com/albums/k96/possom75110/67%20Chevy/IM000238.jpg

http://i86.photobucket.com/albums/k96/possom75110/67%20Chevy/IM000244.jpg

http://i86.photobucket.com/albums/k96/possom75110/67%20Chevy/IM000026.jpg

http://i86.photobucket.com/albums/k96/possom75110/67%20Chevy/IM000027.jpg

[possom813]

Price drop to 1350, and included is the assembled flatbed frame that needs installing and a bunch of extra junk, I mean parts...

[twobluechevy]

I paid $500 for a 65 C10 that was in better shape then that...

[possom813]

Good for you, then you obviously wouldn't be interested in my truck, so why don't you keep your mouth shut about something you know nothing of.

Thanks for the response

[LiftedVictory]

I paid $500 for a 65 C10 that was in better shape then that...

Congratulations, now shut the fu*k up, if you were selling something, you would want someone to come on and say what you said?

Don't be an ass and ruin peoples threads.

[JuanB]

Man dont be offended, But that would make a perfect Deer lease truck. Put a wooden bed on back. It's already Stout Enough.
Hell Camo that Baby and put "Deer Truck" 2K on it and watch it Fly!!!

[10whit7]

wish i had the money i would love to have that truck as a toy

[CowboyUpZ71]

where is corsicana?

[KickAss89chev]

wish you werent in texas! i would probly try to trade you my blue monte!

[k20chevy 454]

those tires can be balanced cause i got same tires and rims on my truck...not to thread jack just trying to help out...that would make a killer toy did you try craigslist?

[possom813]

It's been on craigslist for a while.

Corsicana is about an hour south of Dallas on 45.

I was thinking about using for a deer lease truck, but I can't bring myself to camo it. I already have a helluva frame that I was going to but 2x12's into for a bed, I just really lost interest.

I also recently dropped the price to 1200

[possom813]

where is corsicana?

According to the almighty google, I'm about 3 hours from you.

[possom813]

I paid $500 for a 65 C10 that was in better shape then that...

Oh yeah, just for the record, this is Texas

http://austin.craigslist.org/cto/919430367.html

[fox660r19]

hey man if you still have this truck in a couple of weeks consider it sold.