View Full Version : 99 Dash in 88-98


Texas_Longhorn
11-23-2008, 08:10 AM
Has anyone done this swap. and before you ask yes i have sifted through 22 pages of search results to find on only 2 pics with the just mounted. i need wiring diagrams and mounting problems.


Thanks

Tim

cordatta
11-23-2008, 09:10 AM
the 99 dash is from a completely different body style but i suppose anything is possible with time and effort. I would say try your hand at turning the 88-94 into one of the dashes from the 95-98 line. Good luck on the swap and post some progress pics as you go.

Texas_Longhorn
11-23-2008, 10:51 AM
i have a 96 an i am looking to swap im looking to up grade to the 99 and later

Texas_Longhorn
11-26-2008, 06:40 AM
Ttt

93Sierra
11-26-2008, 08:34 AM
99(Classic)? or 99 NBS? I'm sure the 99 classic wouldnt be different than the 95-98 OBS :looking:. But with the NBS..I wanna see some pictures of that :rolleyes: .

hornsfan10609
11-26-2008, 11:44 AM
Why, what is so special about the NBS interior? I wouldn't do it, way too much work involved.

ragmc
11-26-2008, 12:33 PM
There was a post on here with pics a while back It was really sweet the way it was turning out too and Im even thinking about doing it to my 91

BOWTY
11-26-2008, 12:47 PM
From the articles I have read on the swap the steering collumn is in a different location. With a stock dash the colomn won't line up with the dash and the hole in the fire wall. I have not done this myself so I don't know for sure.

willinthe985
11-26-2008, 03:27 PM
There's that red k-1500 that has a full nbs interior and a d-max. Can't find pictures, but maybe someone else can.

edit: found it.
http://image.trucktrend.com/f/8534746/163_0412_03z+1989_chevrolet_silverado_k1500_flareside_4x4_pickup+interior_driver.jpg

http://www.trucktrend.com/features/tech/163_0504_duramax_diesel_engine_allison_transmission/index.html

kev2809
11-26-2008, 06:53 PM
damn, that looks good. but i guess it depends on how much time and work is involved to make it worth it. unless its just a project truck then you could take all the time you want and it doesnt matter.

Texas_Longhorn
12-16-2008, 07:54 PM
ttt

chevyz71man
12-16-2008, 08:42 PM
Would be a insane project. I thought about doing it before I did my 98 interior. Going to have huge problems with the blend motors for the heater box. Also going to have to run a body control module to make everything work... I think the stock ECM ties into it all also.. That should be no problem with a vortec engine though. Either way it will be an insane amount of work. I would love to have a 03+ dash.. But there are just way to many problems beyond mounting it.. that's the easiest part. Also need some custom A-pillars. Did I mention air box problems??? Nothing will line up.. all custom... or no heat and a/c.

hornsfan10609
12-17-2008, 10:30 AM
There's that red k-1500 that has a full nbs interior and a d-max. Can't find pictures, but maybe someone else can.

edit: found it.
http://image.trucktrend.com/f/8534746/163_0412_03z+1989_chevrolet_silverado_k1500_flareside_4x4_pickup+interior_driver.jpg

http://www.trucktrend.com/features/tech/163_0504_duramax_diesel_engine_allison_transmission/index.html
That looks absolutely disgusting with the stock wheel and door panels. I prefer the stock interior to that.

88vert
12-17-2008, 05:28 PM
Would be a insane project. I thought about doing it before I did my 98 interior. Going to have huge problems with the blend motors for the heater box. Also going to have to run a body control module to make everything work... I think the stock ECM ties into it all also.. That should be no problem with a vortec engine though. Either way it will be an insane amount of work. I would love to have a 03+ dash.. But there are just way to many problems beyond mounting it.. that's the easiest part. Also need some custom A-pillars. Did I mention air box problems??? Nothing will line up.. all custom... or no heat and a/c.


Actually the stock air box lines up pretty close to the 02 dash inlet. Just need to make an adapter. I've put my truck on hold for a while since buying my 01 325i bmw but I'm starting to work on it again. First air ride then I'll eventually get back to the dash and interior. Mounting is a pain but I think the look is definetly worth the effort. Good luck!

Texas_Longhorn
12-17-2008, 07:39 PM
88 please keep me posted

nickl011
12-17-2008, 09:33 PM
I'm not gonna lie, that would look beautiful in a 95+ OBS!!