Seabee15
12-28-2008, 05:09 PM
Ok, here's the deal. I want to clean up my rearend a lil bit. What I was thinking of doing is:
1: Remove the rearend
2: sand it all down (to about 300 grit)
3: put some tough primer on
4: put a coat of glossy black paint
5: remove the rear diff cover (and fluid)
6: Sand the rear diff cover to about high grit (Get it very smooth)
7: Primer it and Paint it
8: Replace old diff bolts with shiney silver stainless bolts
9: Add Royal Purple Gear oil
10: Then possibly do a rear brake job (pads, turn rotars)
11: Clean up the brake parts, put in new one way valves on the calipers
12: clean, sand and paint calipers
13: Put back the new pretty axle
14: Wait till the first rainy day for it to look like it was before the paint..lol
any tips or suggestions??
1: Remove the rearend
2: sand it all down (to about 300 grit)
3: put some tough primer on
4: put a coat of glossy black paint
5: remove the rear diff cover (and fluid)
6: Sand the rear diff cover to about high grit (Get it very smooth)
7: Primer it and Paint it
8: Replace old diff bolts with shiney silver stainless bolts
9: Add Royal Purple Gear oil
10: Then possibly do a rear brake job (pads, turn rotars)
11: Clean up the brake parts, put in new one way valves on the calipers
12: clean, sand and paint calipers
13: Put back the new pretty axle
14: Wait till the first rainy day for it to look like it was before the paint..lol
any tips or suggestions??