1994 K5 Blazer 4x4 for parts [Archive]

pwrhous

06-17-2009, 09:51 PM

I have a wrecked 94 K5 Blazer. Every part except the back glass, gas tank and cat. The truck has 120K original miles and a rebuilt 4L60E trans with 3K miles. It has grey cloth interior. The frame was bent about 1/2" in the wreck which is the only reason I am not fixing it myself. I have a complete front end I purchased after the wreck to fix the damage. There is NO rust on this truck and only minor dings/scratches in the paint. Does not burn or use any oil. The Blazer is at my dad's house about an hour and a half away from me. If you let me know what you want I will let you know the price and get it to you as soon as I can. I don't mind shipping small parts but I am not planning on shipping engine/trans/seats etc.

Parts sold so far: back glass, front seats, console, engine and kick panels. Everything else is still there.

Mods if this is in the wrong forum, I apologize and feel free to move it.

http://img.photobucket.com/albums/v206/pwrhouss/DSCF1881.jpg
http://img.photobucket.com/albums/v206/pwrhouss/DSCF1879.jpg
http://img.photobucket.com/albums/v206/pwrhouss/DSCF1826.jpg

Sub-Par

06-18-2009, 01:12 PM

How much for the whole rig?

pwrhous

06-18-2009, 05:29 PM

I am not selling the whole truck because I will lose my butt in the parts I have. But if I could get about 1600 I would consider it.

OceanboundZ71

06-21-2009, 07:58 AM

Message sent.

pwrhous

06-24-2009, 09:30 PM

Parts sold so far: Both sets of front seats, Cat, back glass. Everything else is still available.

reesez

07-04-2009, 11:18 PM

i cant tell is the interior gray? if so id like both door panels. color on my lcd is funny lol

pwrhous

07-05-2009, 12:15 AM

Yes the interior is grey. When you say you want the door panels, how much do you want to include-switches, harnesses, just plastic, Etc.

01SilvyZ71

07-05-2009, 12:24 AM

murdock?

reesez

07-05-2009, 02:13 AM

no switches, id love to have both doors lol, but to ship would be ungodly lmao.

oh and the nerf bars, good shape? the original buckets, they ok? i need a driver seat, mines broked .

pwrhous

07-05-2009, 06:47 AM

The nerf bars are ok but have a little rust. To be honest it would probably be cheaper to buy new ones than to ship mine. The seats are gone but just let me know anything else you need and I'll get you a price and shipping estimate. Thanks

reesez

07-06-2009, 10:51 PM

are u not wanting to ship the door panels then?

pwrhous

07-07-2009, 05:19 AM

I could but it probably won't be cheap. I can try to get an estimate if you would like.

BOTTLEDZ28

07-07-2009, 09:10 PM

I need both drivers and passengers side window switches if they are still for sale. My blazer has power mirrors too. Let me know if the switches still work correctly. I also need the two plastic center vents above the tape player.

Mantovanelli

07-07-2009, 09:14 PM

How much for the cargo windows shipped to 32224? And dashboard.

pwrhous

07-07-2009, 09:54 PM

What are you referring to as cargo windows? I'm not planning on shipping the dash since the cost will be too much.

BOTTLEDZ28

07-08-2009, 06:40 AM

pwrhous, please let me know asap if you have both window switch panels. LH and RH.

pwrhous

07-08-2009, 01:56 PM

Yes I have all the switches you need.

bodyman71

07-08-2009, 07:36 PM

would you sell the flares?

pwrhous

07-08-2009, 07:58 PM

I could sell them but only two are really good. Also the factory flares are attached with clips in the sheet metal and not screws under the fender like after market ones.

BOTTLEDZ28

07-08-2009, 10:06 PM

Yes I have all the switches you need.

May I get a price on them please? I also need the 2 center venter on the dash as well. I may need a a few more things but I have to go outside tomorrow and check the truck out. Let me know on the switches though as I need them the most

pwrhous

07-08-2009, 10:36 PM

$50 for everything plus shipping. Shouldn't be much more than $5

pwrhous

07-10-2009, 08:07 AM

Parts sold: Back glass, front seats, console, kick panels, engine

Everything else is still there including all sheet metal and 4L60E trans with 3K miles on it.

CountryChevy15

07-10-2009, 11:59 AM

wheels....good shape? willing to sell 2?

pwrhous

07-10-2009, 02:02 PM

I'll sell two.

CountryChevy15

07-10-2009, 03:03 PM

I'll sell two.

price shipped to 61753?

BOTTLEDZ28

07-11-2009, 10:53 AM

I will take the two window switches and 2 center A/C vents. I am also in need of the RH C piller molding in the rear of the truck.
Also, any details on the transmission? Was it rebuilt with stock parts? willing to ship? How much?
What kind of shape are the rear lap belts in?

Oh ya, do you still have the ECM and the ECM for the transmission? I was told the trans has it own "brain" and my truck is acting up and some have mentioned the trans computer is bad. I need one from a 94.

pwrhous

07-11-2009, 04:45 PM

The trans is a 4L60E with less than 3K miles on the rebuild. It was a stock rebuild and I paid $2300 for it. $500 for the trans. I'll have to check on shipping but based on past experience, it probably won't be cheap.

The rear seat belts are in very good shape.

I still have the ECM for the motor and trans. I'll throw in the C-pillar free with the other stuff you wanted. If you want to do paypal, just send me your email address. Thanks

BOTTLEDZ28

07-11-2009, 05:00 PM

my email is bottledz28@aol.com. Can you get me a price for the rear lap belts? What kind of shape is the carpet in? I havent messed with my blazer in over a year and I just now have been going out to look through it and see what I need to make it nice again. I just wish you were closer because I need a few larger interior panels as well as the rear bench seat. But I know its hard to ship those larger items. So, for now I will just get the smaller stuff from you:
center A/C vents
left and right window switches with the panels
rear lap belts
RH C piller panel ( the lower one that goes up the side of the truck.)

I will need a grand total on those above items and then I will think aobut the other stuff. I am so tempted to just pay you for the trans and then figure out how to get it up here. I need a trans and for $500, I am going to kick myself if I dont get it. Its just the location thats killing me. I wonder what the shipping cost would be to a buisness address in Fallriver MA. But anyway, please get me a total soI can pay you for the smaller items.

Oh and what are you asking for the ECMs

CountryChevy15

07-11-2009, 08:01 PM

price shipped to 61753?

got a price?

Randy_W

07-11-2009, 09:18 PM

Over size parts are usually way cheaper to ship by bus and can be shipped/picked up 7 days a week.

pwrhous

07-12-2009, 01:37 PM

Shipped by bus? What company would you use and how would you package something like a transmission? Thanks for the advice.

pwrhous

07-13-2009, 07:37 PM

Countrychevy15-pm sent

pwrhous

07-14-2009, 06:01 AM

Update on parts sold: Back glass, front seats, console, kick panels, engine, glove box door, rear light cover, window switches, center AC Vent, rear lap belt and RH rear C-pillar

Everything else is still there including all sheet metal and 4L60E trans with less than 3K miles on it.

AtomicHoe094

07-17-2009, 09:07 PM

you didnt have headers did you? anything performance wise?

pwrhous

07-17-2009, 09:39 PM

I don't have headers. As far as performance, I still have the K&N filter, TBI spacer and custom chip from TBI chips.

Randy_W

07-18-2009, 08:37 AM

Shipped by bus? What company would you use and how would you package something like a transmission? Thanks for the advice.

The only national bus line is Greyhound/Trailways. As for packaging, a wooden crate like any other shipper.

BOTTLEDZ28

07-18-2009, 05:20 PM

PM sent on additional parts needed

95tahoe95

07-18-2009, 05:52 PM

how much will you sell the chip for?

pwrhous

07-18-2009, 09:52 PM

I'll sell the chip for $100 shipped. I bought it from TBIchips for $175 and it was in the truck 3 weeks.

CountryChevy15

07-19-2009, 12:30 AM

just wondering if you ever got a final price shipped for two wheels?

pwrhous

07-19-2009, 05:58 AM

I'm going to check monday. The fed ex store is closed on the weekend.

95tahoe95

07-19-2009, 09:55 AM

I'll sell the chip for $100 shipped. I bought it from TBIchips for $175 and it was in the truck 3 weeks.

What gear ratio did you have in your rearend? and what is your prom code?

pwrhous

07-19-2009, 11:02 AM

3.42 rear end. The code on the chip is 0099 BJYL

BOTTLEDZ28

07-21-2009, 09:36 PM

pwrhous, did you get my PM on the list of additonal parts I needed? I just recieved the parts you sent me. Thank you very much. I do need more though. I sent you a PM with the list a few days ago.

Parts needed:
grey plastics that go around the inside of the liftgate window ( I just need the LH and RH ones that go on the bottom.

I need whatever plastic cover that goes over the motor on the rear window

need the upper C piller plastic on the RH side

do you have the insert that goes inside the dash where the stock radio would normally go?

I cant remember if there was anything else. Youd have to check my PM I sent you. Let me know. thanks

pwrhous

07-21-2009, 11:15 PM

I have those parts. It will be a few days before I can get to them though. I think the plastic piece over the motor cover in the rear window is cracked but still usuable. I will try to take some pics to make sure I send the right pieces.

BOTTLEDZ28

07-22-2009, 06:18 AM

trickedout420

07-25-2009, 01:49 AM

gauge cluster have tach if so how much shipped to 64034?

Mantovanelli

07-25-2009, 02:23 AM

What are you referring to as cargo windows? I'm not planning on shipping the dash since the cost will be too much.

The windows that are behind the driver and pass windows the long ones.

BOTTLEDZ28

07-25-2009, 09:01 AM

If you get the cluster out for trickedout420, then let me know if he wants the clear plastic cover. If not then I will take it. Mine has burn mark in it from someone who apparently thought it was ok to leave a lit cigeratte there.

92K15

07-26-2009, 11:53 PM

How much for the instrument bezel shipped to 43209?

BOTTLEDZ28

07-27-2009, 07:33 PM

any updates on those parts I was asking about?

CountryChevy15

07-28-2009, 02:32 PM

would you know if the door handle assembly would fit a 97 k1500? the black trim piece around the handle is broken on mine. shipped to 61753

pwrhous

07-29-2009, 05:47 AM

Are you referring to the interior door handle or the outer door handle?

BOTTLEDZ28

08-01-2009, 10:46 AM

just checking in to see if you had a chance to look into those parts I was asking about.

pwrhous

08-01-2009, 11:35 AM

Sorry it took me so long. I have the other lower c-pillar and the dash insert you need. I sold the rear window a while back and I do not have any trim for that. The piece of trim that goes at the top of the tailgate that covers the window motor up is actually one big piece that is molded into the entire tailgate cover. I have it but it will probably cost a lot to ship because of its size. Here is a pic of the two pieces I have.
http://img.photobucket.com/albums/v206/pwrhouss/DSCF2372.jpg

Here is a pic of the trim around the top of the tailgate. You can see what I mean when I say it is all one big piece.
http://img.photobucket.com/albums/v206/pwrhouss/DSCF2195-1.jpg

I do have both of the plastic pieces that go beside the rear window if that is what you need

BOTTLEDZ28

08-01-2009, 11:41 AM

Im gonna head outside and take a look at the panels Ihave again. What panels do you still have for the rtear window? Any at all? Also, I dont have a copy of the PM I sent you with the list of parts I needed. Do you still have a copy of it?

pwrhous

08-01-2009, 11:48 AM

Here are the plastic trim pieces that go around the inside of the back window
http://img.photobucket.com/albums/v206/pwrhouss/DSCF2373.jpg

Is this the pm you are talking about?

"I need a few more iterior pieces if they are still available. I already got the lower RH C piller panel off of you but now I need the upper one on the RH side that goes to the headliner. I also need the plastic cover that covers the motor on the rear window. I have no idea whats there since my truck doesnt have anything there at all. I also need the plastics that wrap around the inside the rear window. (just the LH and RH ones that go on the bottom.) I do not need the top two. Also need what looks like the coat hangers or something that are in the rear of the truck on the roof. I have two holes in the headliner so something has to go there. The LH one is above the spare tire and the RH one is in the same spot but on the right side..
Hopefully you have these and they are in great shape. "

BOTTLEDZ28

08-01-2009, 11:57 AM

Yes that is the PM I was looking for.

I do NOT need the lower C piller piece you have pictured with the dash insert. I need the 2 that you have pictured on the table ( assuming they are not cracked and the screw tabs are still on the back sides of them.) Also need the coat hangers that are on the headliner up top on both sides of the truck.
Also, I need the B pillers that go from the floor to the roof just beside the front seats. Both of mine are cracked from people stepping on them to get in the back seats. I know they are a bit big in size but let me know if you wanna sell those and ship them if they are in good shape.

dash insert
LH upper C piller
RH upper C piller
LH coat hanger
RH coat hanger
LH B piller
RH B piller
4x4 Actuator??????? Still have it. does it work?

pwrhous

08-01-2009, 12:13 PM

I have all those parts and all are in excellent shape. No cracks or anything. As far as the 4x4 actuator, can you give me a little more info about exactly what you need?

BOTTLEDZ28

08-01-2009, 12:18 PM

The actuator is a some type of electrical soleniod thingy I think. Maybe somehwere else reading this can better explain it. Its not big at all and Im not exactly sure where it is located. I will head out again and look under the front of the truck. Im assuming that it what is broke on my blazer. I get nothing when I try to engage the 4x4.

BOTTLEDZ28

08-01-2009, 01:00 PM

I just took the blazer for ride up the street and friggen blew the radiator all to hell. I cant win here. I also need a new throttle cable. Its so hard to push the pedal down. Do you still have the throttle cable?

pwrhous

08-02-2009, 07:05 AM

Still have the throttle cable.

BOTTLEDZ28

08-02-2009, 09:24 AM

Im going to investigate the throttle situation. it may just be the pedal binding up. GM wants $16 for a new throttle cable so I may just buy a brand new one. Can you get me grand total on the parts I need?

pwrhous

08-02-2009, 05:03 PM

I'll get everything on Monday. Let me make sure I do have everything before I get you a total.

HD-Toolin

08-06-2009, 06:50 PM

I was wondering if you still had the sun visiors for both sides, the K&N Air filter and LH mirror. How much would you want for each item?

pwrhous

08-06-2009, 09:36 PM

I have all those parts. The mirror is a power mirror. All parts for $75 plus shipping

BOTTLEDZ28

08-15-2009, 01:09 PM

I'll get everything on Monday. Let me make sure I do have everything before I get you a total.

Any updates on those parts?

pwrhous

08-25-2009, 05:19 AM

Still have lots of parts left including transmission (rebuilt with 2800 miles), complete front clip, 3.42 rear end and front end, doors, mirrors, rear seat, tail gate, wheels, etc. Let me know what you need

BOTTLEDZ28

08-25-2009, 05:51 AM

still waiting on a shipping quote from you for the parts I needed. If the A pillers are to big to ship then let me know the shipping cost on the rest of the parts.

pwrhous

08-25-2009, 12:56 PM

I'll get you a quote as soon as I get back to my house. I have been living in a hotel for the last 3 weeks and just haven't been able to get it for you. Thanks

HD-Toolin

08-26-2009, 08:21 PM

I was wondering if you still had these parts:

TBI Chip, Sun visors, both tail light assemblies, Switches for headlights and rear hatch along with panel that goes around them.

Also what is your payment plan?

pwrhous

08-27-2009, 04:34 PM

Still have all those parts. I'll take paypal or money order. Let me know what you want.

HD-Toolin

08-27-2009, 09:38 PM

I'll take the parts listed: TBI Chip, Sun visors, both tail light assemblies, Switches for headlights and rear hatch along with panel that goes around them. How much would it cost to be shipped to 53213. Also I will pay with paypal and need the account # in order to send you the money.

Mantovanelli

08-28-2009, 12:41 AM

Do you have the headliner? What condition?

pwrhous

08-28-2009, 07:50 AM

I will be out of town until Monday. I will get you an price on everything plus shipping then.. Thanks

matt trakker

09-03-2009, 12:05 AM

Wow, wish I saw this thread when you first posted it...and wish you were closer, I could use some of the larger grey interior parts for mine (B-pillar plastic panels, etc).

Out of curiosity, do you still have the grey plastic housings from both door panels that the power window switches attach to, or did those get sold along with the switches?

If you still have those and if they have no broken rear tabs or cracks in them, I'd be interested. Thanks in advance!