Removing Armrests

[xlt]

Hi folks.
Pretty new here and only been lurking till now. Great site with plenty of good info.
Before the sawsall comes out, can anyone tell me how to get the armrests off my bucket seats.
I just bought the truck a couple months ago and removed the seat covers for the first time to expose what are in mint condition seats.
I'm putting a 12" down firing sub in and already moved the console but need the armrests removed for the box.
Any help would be appreciated. I did multiple searches and came up empty.
Thanks.

[xlt]

Got it.
But for anyone wondering, push all the way up and push some more.

[georgealtemus]

It might be like my 2000,undo the bottom of the factory seatcover and reach inside,move the foam behind the armrest and there is a horse shoe looking clip with a oring over the end to keep tension.Take the oring off and pry the clip out with a small flathead screwdriver,then pull the armrest off.To install just put the clip and oring back on and reinstall the seatcover,then put the armrest back on and listen for it to snap back into place.Hope that helped.