Dual Guage Pod

[Kid_Rock_GTX]

I have a dual guage pod with 2 2 needle guages from larry. but i can not get them to go in and work! i mean i can get the guage in the pod but i cant get the little fittings for the 1/8 line to go on them i have tryed everything larry sent me some 45 dgree angle to make it work but still nothing! has anyone ever done this? i cant make it work at all i hate this i dented up the place where the bulb going trying do to this im thinking of selling both parts and getting me some digital guages

[Kid_Rock_GTX]

Originally posted by 5-8CHEVY
So you're saying there's no room w/ a straight fitting or a 45? :think: There should be plenty of room w/ a straight fitting. :read:

there is no room to start to thread the 45 and the stait fittings hit the side so hard that is keeps them "open" so that u cant get the 1/4line to lock in them

[Kid_Rock_GTX]

Originally posted by 5-8CHEVY

You can't put the fitting on the gauge and then put it in the pod?

no cause if i put the fitting on the guage then slid it in how would i get the brace behind it to hold it in place and also the nuts toop?

[Kid_Rock_GTX]

Originally posted by 5-8CHEVY

I've never mounted them in the pod that's why I'm wondering. So is the gauge mount attached to the pillar or can it be unbolted?

huh? i have a full a-piller guage pod right in my arms once i get the guages in i can take and put this over the stock piller wiht all the stuff ran too so does thwt help?

[Kid_Rock_GTX]

Originally posted by 5-8CHEVY

You can't cut away the old pillar for room to run the lines?

thats not the problem the problem is i cant get the fitting on the guaged

[Kid_Rock_GTX]

Originally posted by 5-8CHEVY

What's the fitting hitting? The stock pillar or the new one? :think:

problem solves i had to put the guage in upside down to make the 45 dgree fitting go on then turn it all the way around boy that was a pain!

[Kid_Rock_GTX]

Originally posted by 5-8CHEVY

I knew it was you and not the parts. :slap: :D

ur only good for ur rare bit of wisdom then u go back to stupid old izzy! :D

[Kid_Rock_GTX]

Originally posted by 5-8CHEVY

Remember that when you're bombarding me with ??'s on IM tonight. :read: ;)

Why I outta!.....:to: