Could these fit in a 92.....?

[KuzIKan]

with slight modifaction to the brackets and stuff?
http://www.chevrolet.com/silverado/images/colors/seat03.jpg
i dont want the console....im thinking about one out of a suburban but i dont know, thats why i started the other thread:crazy:

[Physh1]

Anything can be put in anything with the right work. Chances are the mounting points are different than your 92 so you'll likely have to drill some new holes for them.

Cameron

[1badgmc]

Originally posted by Physh1
Anything can be put in anything with the right work. Chances are the mounting points are different than your 92 so you'll likely have to drill some new holes for them.

Cameron

:word:

[CleanBowTie]

it can be done. :D
http://www.streetsourcemag.com/uploads/Ownerprofiles/Cheato08/522200370808AM93271.jpg

http://www.streetsourcemag.com/uploads/Ownerprofiles/Cheato08/522200370422AM2281.jpg

pic before it was finished

http://www.streetsourcemag.com/uploads/Ownerprofiles/Cheato08/26200372220AM35371.jpg

these are the only pics i have so far.

[KuzIKan]

Originally posted by CleanBowTie
it can be done. :D
http://www.streetsourcemag.com/uploads/Ownerprofiles/Cheato08/522200370808AM93271.jpg

http://www.streetsourcemag.com/uploads/Ownerprofiles/Cheato08/522200370422AM2281.jpg

pic before it was finished

http://www.streetsourcemag.com/uploads/Ownerprofiles/Cheato08/26200372220AM35371.jpg

these are the only pics i have so far. what kind of console is that? thats the one i was looking for last night on ebay.....please:D

[CleanBowTie]

Got it off of ebay, i was told it came out of an 2002 yukon. the cupholders aren't factory, but its ok, that's where my gauges will go once i bagg it.

[KuzIKan]

where they hard to install?
did you run into any problems?
what all modifacations had to be made?
and do you have part numbers?

your interior is exactly how i want mine to be....i like it alot, geez, its just awesome:rocking: :rocking:

[Timberwolve81]

cleanbowtie, what year are the doorpanels that you used in your swap?? Looks awesome :thumbup:

[CleanBowTie]

Fullsized, thanks dude. well i don't have any part numbers for any of the parts i used. The center console was easy to install. just used 4 self threading screws and just screwed it to the floor. Now for the seats, me and my brother-n-law made two metal plates and welded them to the floor to make the floor level. then we just bolted the seats to that plate. really wasn't hard. and just ran the hot and ground wires and its was a done deal. If you are short guy like me (5'6) then these seats would work for you.

Timberwolve81, i used a set from a 1996 suburban, soo i think. There are a few things that i have to work out. just haven't had time to do so.



:dunce: