View Full Version : Busted up SCCA Race Car


Parts Bitch
06-08-2004, 07:59 AM
Before....
http://motorsportsimaging.com/SCCA%20Racing/MARRS9/group1/images/DSC_5280.jpg
After....
http://motorsportsimaging.com/SCCA%20Racing/VIR_04/IT/images/VIR04_1263.jpg

MY 2nd Race this year... some a$$hole had to spin in front of me
and then stall....

83 SCCA ITA or IT7 Race Car, With Log Book and race results handy for the past 4 years.

- You CAN afford this

1983 Rx-7 Professionally Built

Fresh 12a
Nascar Style Weld in Cage. With Nascar bars, makes it EASY to get in and out of.
This is Painted 2003 350Z Nissan Daytona Blue, and white. with Vynil Graphics on it with my number (74)
Corbeau Extra Racing seat, its not an Extra seat, "EXTRA" is the name of the seat, Made for people over 200 lbs.
Autopower Monster 5" tach with shift light.
Custom dropped floor, 1.5" lower for People over 6' Tall it makes the fit into the car a WHOLE lot better. Adjustable forward and back with a few bolts if your shorter or taller than i am.
15 gallon Fuel Cell, and Steel Cover. and High Cap Fuel Pump.
Tokico Adjustable Coilovers
Fresh Rebuilt 5 Speed Trans. and Fresh Spare.
Lots of Brake parts extra.
2 new rotors up front, and new berrings.
BRAND new pads on the back.
Custom Panhard bar, and stabilizer bar.
Dual Exhaust back to Y pipe at muffler with MagnaFlow 4" Exit Pipe. (meets sound) 90db, the limit is 103db
Air Dam
Brake Ducts
Aluminum Radiator Duct.
Rewired Dash.
Custom made Guage Cluster mounted to Rollbar cross bar.
Oil Pressure, Water temp and Oil Temp.
Switches are, MAIN POWER, ingnition, fuel pump, electric fan, wiper, and a Extra Aux. (which isnt hooked to anything)
Fire Extinguisher
Striped Interior
Momo Petals and steering wheel
H&R, 5 point Harness and Window net.
Big oil filter conversion, and K&N Air filter in custom housing.
NGK Plugs, extra new set,
Heavy Racing Plug wires.
New Dist cap and rotor button
Camcorder Mount
6 - Hoosier 225-50-13's - Newest
6 - Hoosier 205-50-13's - Replaced with the 225's
4 - Yochohama Rains
8 - Spare wheels with no tires.
Spare Fresh rebuilt Tranny
2 other Trannys
Spare Rotors
Spare drive shaft
Spare calipers and brackets.

I'm sure there is more i am forgetting. But you get everything I have to go along with the car.

Spare Parts Car. I have not Robbed ANYTHING off it yet.
the other one i have is STRIPPPED, if you want that too you can have it too.

Ok, Down to the Bad stuff.
It needs:
Front right fender
Hood
Bumper
Headlight
Some other Misc Stuff
and some paint.

As it Sits now. With Everything listed above $3500
Fixed for $5000 Total With everything listed above.
There is at least 15k Invested in this car.

I was in a Fender Bender in the last race. its not bad, just needs that before you can hit the track again.

I Can fix it for you, and have everything ready to Roll

This is a Cheap car to run, and a cheap class to compete in.
I am 23 and can do this on my Current Funds, No problem

Times:
1:30.050 - At Summit Point
2:25.500 - At VIR (only run there 2 times)

If you are serious, email me at Qualityusedparts@yahoo.com and i will send you as many pictures as you want.

Joe
06-08-2004, 08:12 AM
Not bad :D

Your damage could have been much worse :D

Tahoe on 20s
06-08-2004, 08:32 PM
would it change the race class if a spoiler and body kit was added?

Parts Bitch
06-08-2004, 08:42 PM
Yes in SCCA Club racing
ITA or IT7 you can not run spoiler or body kit.
the EP class or SPU you can.
and you can do alot more to the car in those classes too.
they just tend to be a race to find the Best of all the parts.
and that was too much money for me.
i bought the car, and put brakes and tires on it. and other general maintinence and thats all you really need to do to race, and race up front.
http://www.wdcr-scca.org/images/splash/01M1GTR004.jpg

It was Cheaper, and alot more fun for me.

Here to check out SCCA http://www.scca.com/
here to check out whats near you http://www.scca.com/Inside/Index.asp?IdS=001E86-6222900&Reference=RegionalSites&~=
Here is my Regional site. http://www.wdcr-scca.org/

Parts Bitch
12-23-2004, 07:10 AM
I was Post Digging.........

I am Parting out this car now...........