Got my indiglos in the mail...wiring ??

[JB]

I have a few questions about the wires. I am just reading the crappy instructions and there is no wiring instructions, it tells more about removing the dash than wiring. Only question now is the kit has some sort of green strip with what looks like arrows or something with a 4 or 5 pin connector. Whats that? Any wiring tips would be greatly appreciated. Help Funk!

[Funk]

your indiglo will have two tabs on them one on the left and one on the right, there is two because you can use any side so you don't have to to run the wire around obstacles..

I used the left because it was closest to the light box..

now just take the knob box and run the power wire to the back of the head light control box, on the wire that has power on it ONLY when the headlight switch is in the run postion.

then run your ground and mount your box..

I mounted my knob on my steering column by taking it off drilling a hole and mounting it through it.

[JB]

Thanks funk, I am going to install these friday morning/afternoon so you may expect more questions. I really appreciate all of your help. I will let you know how it turns out. Thank you very much.