a few quick questions:

[low_clazz]

first, i was wondering what the difference is between mounting the valves for my air by the tank or by the bags...is there really a big difference? im about to buy a fittings kit from innovative and i need to know which kit to get as far as where ill be mounting my valves.


and, im debating between these to shock relocators from innovative for my truck the first one is $90 and the second one is $99 both comes with shocks shown:

THANKS!!!

[Beyond Static©]

The first shocks look like the best ones IMO. As far as valve mounting, the closer to the bags, the faster. I mounted mine near the bags, not directly on the tank. It's mainly personal preferance. It's easier to do on the tank, but if your tank's in a tight spot, do them near the valves.

[Toolman]

I would go with the Air Ride set-up!!! As far as the valves. It will not make that much of a difference. I would mount all in one location for ease of maint and install.

[Mike]

I have the ART shock kit sitting next to me waiting to go in. Its quality stuff, and cheaper, which is why I went with it. Its really personal preference as to where you mount the valves, Mine are just scattered around whereever I could fit them and still have access in case they need maintenence

[low_clazz]

i got some 3/8 valves and i want them to be as fast as i can get them yet were i can still get to them without jacking the truck up or anything...

[Mike]

well, if you are gonna be laying frame its gonna be hard to get under the truck. Mount the front valves in the engine bay, and the rears somewhere you can reach in through the wheel well of somethin

[low_clazz]

well, if you are gonna be laying frame its gonna be hard to get under the truck. Mount the front valves in the engine bay, and the rears somewhere you can reach in through the wheel well of somethin
that sounds pretty good...i guess i will do that..thanks again mike

[Izzy]

Get the shock kit from larry without the shocks them get some monroes like the ART kit, they shocks would run about $35 for the pair so you'll save $20 over the ART kit. :read: