K&N FIPK, Throttle Body Spacer, and Lift Kit For Sale

[kj454]

All of these parts are used and came off of a 97 K1500 with a 5.7L V8.

K&N FIPK(used for less than a month)- $150 (sold)
Poweraid Throttle Body Spacer- $50 (sold)
Rancho 2-3" Lift Kit- $350

These prices do NOT include shipping.

[nebraskaz71]

notice much with spacer? will k&N work with my body lift u think? i'm kinda interested

[onefastz71]

How much would shipping be to 83318 and also how did the spacer work with the intake. is there any special bolts you need?

[5150Kon]

where in CA r u located, i may be interested in the lift. that is if it will work on a 97 yukon

[kj454]

I'm located in Sacramento, but I don't know if the kit will fit a Yukon.

[MinnesotaZ71]

assuming this will fit a 98 Sierra with manual 4wd with no driveshaft mods what is the price shipped to 56007 thanks Ryan

[kj454]

For the lift kit shipping will be expensive. I'm assuming between $70-$100.

[MinnesotaZ71]

do you happen to know the part number of the lift?

[kj454]

do you happen to know the part number of the lift?

I do not know the part number.

[TwoTone98Z71]

notice much with spacer? will k&N work with my body lift u think? i'm kinda interested


I noticed a little bottom end with the spacer.

The KN will work if you have a bodylift but no if not

[nebraskaz71]

It only works with body lift? haha so confused

[rjwms]

If you have a BL, then you need a spacer with the K&N. Without a BL, then a K&N is good.

This is the way I have mine.

[nebraskaz71]

I just heard the K&N pops off all the time so thats what i was wonderin if spacer would make the diff with my body lift or what :) so i think it will then. Does it all come with everything? How many miles on filter? any pics?

[rjwms]

The K&N pops off if you do a half-ass install. You have to take your time, make sure everything is tight, but not too tight, lined up, etc...

[kj454]

I doubt there's more 500 miles on the filter. I haven't got picture yet but I'm going to try and take some this evening. The K&N comes with everything you need to install it. The kit is basically brand new, it was used for less than a month.

[onefastz71]

With a three inch body lift your going to have to come up with another 2 inches. I know there isn't probably over an inch of flex in those FIPK at least not on mine and the dealer installed it.

[kj454]

I looked at my friends truck and he has a K&N FIPK with the throttle body spacer installed on it. He has a 3 inch body lift. So it will work if you run the K&N with the throttle body spacer. But I don't think it will work with just the K&N.

[onefastz71]

Is the throttle body spacer still available??

[kj454]

Is the throttle body spacer still available??

Yes it is.

[onefastz71]

Would you take 55 shipped to 83318 and does it come with the bolts needed?

[kj454]

Onefastz71- I pm'd you.

[vic_V8]

whats in the lift kit?

[kj454]

Everything is included, it may be missing a couple bolts but that's about it, if you want to give me your email address I have pics, just don't know how to post them.

[vic_V8]

vic_v8@yahoo

[kj454]

The throttle body spacer is sold.