View Full Version : I need seats Please help


rycen
11-16-2004, 02:30 PM
I am looking for front seats for a 94 2dr FS Blazer.

92silverado-ss
11-16-2004, 04:19 PM
EBay and the junkyard are your best bets. They apparently aren't easy to find, or cheap. I lucked out and got my set for around $200 with a console. I've seen them for sale as high as $400 though.

Call your local junkyards, and check eBay. The seats you are looking for are also in OBS Ext. Cab silverados (up to and including 94) and Suburbans up to around that year if that helps you any.

Beau Burnett
11-16-2004, 04:23 PM
You may need to be patient. I looked for several weeks on Ebay before I found the right ones. Although they went into a 1988 OBS, they were fully optioned (except they don't have heat)/airbagged seats from a 2002. Be warned, shipping isn't inexpensive. You may want to have the seller use (believe it or not) shipping via Greyhound bus. I was much less expensive. Good luck.

dabflyboy
11-16-2004, 06:56 PM
are you looking for those actual seats or just FS seats from any year to put in your truck?

rycen
11-16-2004, 09:32 PM
I would prefer to find buckets of that style.I have ckecked all junkyards in 120 miles.I dont think ebay is the answer,500 dollars for 11 year old used seats is a little much.

Sweet Tea Man
11-16-2004, 09:37 PM
i have seats for sale in my thread. not FS seats, but i ran them i nmy truck while it was operational. click link in my sig

OVERCAMBER
11-19-2004, 08:27 AM
I've been looking for seats myself and found this link from cali i think?..its the motherload of truck seats..

http://www.wwwsales.net/fullseats.htm

:fsg:

mcfly
11-19-2004, 08:36 AM
i have been looking for seats all over, but since it is impossible to get any chevy seats over here and shipment is not worth it, i just ended up buying a complete bmw 7series interieur. front buckets are going in the fsc and rearbench is gonna become my new couch ;)

quadracr
11-19-2004, 11:39 AM
I have a set of gray cloth power buckets with console for 400.00. Great shape. I believe they originally came out of a Tahoe, I put them in my truck just until I redid the interior. Now they gotta go.

rycen
11-19-2004, 12:32 PM
A couple questions:What year Tahoe were they out of?Is it somewhat simple to get the power options working if I didn't have the power seats originally?Also do these have the ability to tilt forward so that my rear seat passengers would be able to enter?

quadracr
11-19-2004, 04:29 PM
I don't know what year since they were already out when I picked them up. Just run a 12 volt source and ground to the wiring connector on the bottom of the seat. They don't have the feature of tilting forward and releasing the track to push the seat forward. I would just move the seat forward by releasing the handle and then tilting forward.
http://www.fullsizechevy.com/forums/showthread.php?t=127705
The seats are in this post

PUSHROD
11-24-2004, 09:53 PM
On your seat search try car-parts.com. Thanks

dabflyboy
11-29-2004, 07:25 AM
i have some for sale too...heres the link...
http://www.fullsizechevy.com/forum/showthread.php?t=133042

rycen
11-29-2004, 10:45 AM
I need seats not covers.

dabflyboy
11-29-2004, 10:47 AM
these are the actual seats, not just the covers.

dabflyboy
11-29-2004, 10:48 AM
its a 40/20/40 split with the rear bench seat too

rycen
11-29-2004, 10:49 AM
So ,it's the two front buckets the center console, and the rear seat?

dabflyboy
11-29-2004, 11:01 AM
its the two front seats (not buckets. buckets are the seats with armrests, these arent) the center seat (which is not a console/seat, just a seat) and the rear bench seat. also included are the matching seat covers for the console/seat in case you already have, or are going to buy, that option and dont want to lose it.

my truck originally came with the center seat that is shown in the picture. i had everything reupholstered to the new material that is on there now about 2 years back. but then i decided i wanted the console/seat deal so i went to a local junk yard and picked one up and had the same guy redo the upholstering on it to match the rest of the truck. but when i recently put in leather seats in the truck i kept the console/seat because i didnt want to lose that option. i think i may still have a good chunk of the material left too that i will throw in with it if you want it. you can always redo your door panels,dash, sub box, etc or something with it.

rycen
12-02-2004, 12:46 AM
great price on your seats but they wont work on my truck.