Frenchec in Box Dimensions

[Beaver Customs]

Hey,
Handle flip kit just arrived, looks great!
Here are the dimensions for the box in that front bumper.
Brendan

[Custom1]

Hey,
Handle flip kit just arrived, looks great!
Here are the dimensions for the box in that front bumper.
Brendan


I need the distance from the top bolt hole to the top of the plate box

[Beaver Customs]

Hey Hey,
I will pull that dimension on my way into work this afternoon. Tried to get one of the guys to do it over the phone but he couldn't get what I was asking, Mondays....
I'll pay to get it express fedex'd so hopefully it will make it by the end of the week.
Thanks again Mike, I owe you more than a few beers.

[Beaver Customs]

I took a look at the bumper. The top of the box lies higher up than the upper mounting tab on the bumper. I'm no artist with a computer by any strech but I hope these can be of some help. The bumper brackets have a recessed edge cast into them, it looks almost like if it was cut a little closer to the frame on that recessed edge they would fit. Only problem is that gets pretty close to upper welded in bolt. Let me know what you think.
(519)884-2511
Thanks Much,
Brendan

[Custom1]

I took a look at the bumper. The top of the box lies higher up than the upper mounting tab on the bumper. I'm no artist with a computer by any strech but I hope these can be of some help. The bumper brackets have a recessed edge cast into them, it looks almost like if it was cut a little closer to the frame on that recessed edge they would fit. Only problem is that gets pretty close to upper welded in bolt. Let me know what you think.
(519)884-2511
Thanks Much,
Brendan

The body man will have to cut the bolt so it is flush with the bottom of the nut on bracket's bottom. I have already remove my bumper bracket and cut it exactly like you have shown....

Will send you and e-mail with shipping

Michael

[Beaver Customs]

Hey buddy,
I've haven't been on the site much over the last while, but I noticed you did a hood flip kit. How much are you letting these things go for? Sounds like a good project for the coldass weather we're getting.
Any word on shipping/tracking numbers?
Thanks Much,
Brendan

[Custom1]

Hey buddy,
I've haven't been on the site much over the last while, but I noticed you did a hood flip kit. How much are you letting these things go for? Sounds like a good project for the coldass weather we're getting.
Any word on shipping/tracking numbers?
Thanks Much,
Brendan

I sent the bracket out today via fastest ship method (they said 3 days) but there is no tracking #

The hood kits are about 3/4 finished...I am just waiting til after christmas to get the air struts right to hold the hood out and help open it.

Looking like $230-$250

Thanks,
Michael