How do i remove Hood latch pannel? NBS

[OzzHead]

Im currently running some RCA cables from the deck to my amp. I ran them right next to it so far.. but i cant figure out how to take it off so i can put some wires behind there. And i dont want to break it, thats the last thing i need to happen so i thought before i pull to hard and break it id better ask.

Thanks

[FSCred04]

are u talkin about the plastic peice above ur radiator if so just get a flat head screw driver and pop the middle peice out of the lil plastic fastners and the give it a lil tug and it will come off

FSCred04

[tahitsup]

There are two friction pins that hold the panel on, they are on the cab part that is inline with the rocker panel. Grab the panel at the top right by the door seal and pull towards the back of the vehicle, then pull out the bottom pin, you will have to move it around the hood latch a little to get it off. The pins are metal and may get stuck in the cab holes, but they will pull off of the panel (they are just friction clips that slide onto the plastic). Try the passenger one first, its easier to get off and you will understand how the pins work, also I ran my rca's down the passenger side, because my power wires go down the drivers side.

[OzzHead]

Thanks tahitsup, Im going to try that frist thing tomorrow, i had a feeling thats what i need to do but the last time i had a feelin i broke the steering colum cover clip and had to super to glue to make it flush...:( so better safe then sorry this time