| |
View Full Version : LIFT KIT is HERE!!!!! 2K5Squirrel 01-24-2005, 08:50 PM Got the kit in today. Full Force 4" spindles/3" blocks w/ doetsch tech shocks. I will be installing it tomorrow. I will update w/ pics tomorrow afternoon....Thanks again for eveyones help. The 1" coil spacers will be installed later. i couldn't find any in the Houston Area. Conrad KRAZYMATT 01-24-2005, 08:56 PM good luck. post some pictures. have fun with the front shocks. if you figure em out let me know! 2K5Squirrel 01-24-2005, 09:03 PM good luck. post some pictures. have fun with the front shocks. if you figure em out let me know! thanks for all the help...and the Hook-Up on those spindles. I didn't get new shocks for the front, just the rear. FoxTrot 01-24-2005, 09:26 PM awesome! can't wait to see the pics :D 2K5Squirrel 01-25-2005, 09:17 AM I'm going over to my buddy's house @10:00, hope to have it done by 3:00. Will post pics as soon as I get back. FoxTrot 01-25-2005, 12:41 PM I'm going over to my buddy's house @10:00, hope to have it done by 3:00. Will post pics as soon as I get back. Hope it all goes smoothly Cowboy Silverado 01-25-2005, 01:07 PM Cool can't wait to see pics :crazy: NqSilverado 01-25-2005, 01:46 PM i know for a fact you will need longer brake lines for the front. i did a three inch spindle on my 04 2wd and they are a little stretched! rjwms 01-25-2005, 01:50 PM Sweet! Congrats KRAZYMATT 01-25-2005, 03:32 PM i know for a fact you will need longer brake lines for the front. i did a three inch spindle on my 04 2wd and they are a little stretched! nope its 4" spindle you just have to run the line a certain way. Citizen Rider 01-25-2005, 08:31 PM Awesome! Get some pics:head: If you dont mind me asking, how much did you pay for the parts and whatnot? Im really trying to look into budget and figuring out the best way for all this. Maybe part by part if it comes down to it:D 2K5Squirrel 01-25-2005, 10:11 PM nope its 4" spindle you just have to run the line a certain way. You are correct!! Awesome! Get some pics:head: If you dont mind me asking, how much did you pay for the parts and whatnot? Im really trying to look into budget and figuring out the best way for all this. Maybe part by part if it comes down to it:D Came out to $520 shipped, 4" spindles/3" blocks, rear shocks and ball joint shims I will post some pics tomorrow...got finished with the install, then started drinking the "Cold Beer" NqSilverado 01-25-2005, 11:39 PM I RErouted mine too and they where still a little snug and that is with a 3inch spindle. 2K5Squirrel 01-26-2005, 01:30 PM Here's an after install PIC Cowboy Silverado 01-26-2005, 01:34 PM That is sweet :crazy: KRAZYMATT 01-26-2005, 03:35 PM looks good . im jealous i need to get my **** on the roadddddddd. been sitting for 1.5 week 2K5Squirrel 01-27-2005, 10:20 AM a cleaner PIC tek 01-27-2005, 12:49 PM looks badass.. i like it alot NqSilverado 01-27-2005, 02:19 PM how did the brake lines turn out? aberbaseball7 01-27-2005, 06:05 PM I ran a 4" cst spindle and didnt have to run new brake line. Lift looks good, I am thinking about putting that spindle with my 3" body i still have and running some 315's on stockers and call it good. ODPHISIERRA2K 01-28-2005, 12:54 PM looks real good. 2K5Squirrel 01-28-2005, 02:16 PM how did the brake lines turn out? they're fine, i ran them behind the spindle...plenty-o-slack i'll try to get you a pic dankent 01-30-2005, 11:05 PM nice work :) I did the 4inch fabtech spindle lift and didnt need to do anything with the brake lines either. aberbaseball7 01-30-2005, 11:18 PM Fabtech doesnt make a 4" spindle to my knowledge. So it had to be a 3" if it was a fabtech. Ross 01-31-2005, 12:49 AM Very nice, squirrel :D RSTsilverado 01-31-2005, 02:29 PM looks good KRAZYMATT 01-31-2005, 03:21 PM he is running a fullforce 4" spindle. you use the stock brake lines they just need to be routed a certain way (between the spindle and the coil spring) to make it work. vBulletin v3.5.1, Copyright ©2000-2008, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.0.0 |