Belltech 2" Drop Spindles

[Trevor454]

I am lowering my old man's 97 Chev ext cab short box with Belltech 2" drop spindles up front, and 2" shackles in back.

Anything I should be aware with for the spindle install? Any clearance issues anywhere?

We have ordered 17x8" Torq Thrust II rims for it btw.

Thanks,
Trevor

[Physh1]

No clearance issues to worry about. Remember to inspect the wheels bearing and seals on the discs and repack them with grease.

Cameron

[mrflames]

i used two drop spindles with 3 in drop springs and have no problems . just like camron said repack those bearings

[Trevor454]

No clearance issues to worry about. Remember to inspect the wheels bearing and seals on the discs and repack them with grease.

Cameron

Will do. While I was at it, I replaced all the ball joints, and inner/outer tie rod ends.

Was a bitch to get the stock springs back in place, but finally got them.

Hopefully I can have it buttoned up tonight, and then toss the shackles in.