swapping a lift [Archive]

olBlue75

03-16-2005, 08:43 PM

I had a question about swapping a lift kit from a 82 k5 blazer to a 75 k10. Is this interchangable and will all of the stuff mount up? I have never put a lift kit on. Is it real lhard and how long should it take a newb? Any help would great. thanks

1975 k10 350 4 barrel 33x12.5

RyPkr_99

03-20-2005, 06:17 PM

Could somebody move this to just the "offroad" section so he'll get his question answered.

TwoTone98Z71

03-20-2005, 06:19 PM

they should swap

_nar_

03-20-2005, 08:26 PM

Should all swap across easy. Might check the length of the springs mount to mount, some blazers had shorter back springs. 52 and 56 inch ones are available. There are 2 sets of holes at the back mount, so you can move the mount if you have to. Other than that it should be easy.

RyPkr_99

03-21-2005, 02:29 PM

The rear is just blocks not springs so that shouldn't be a problem then.