2" mcgaughy spindle + djm lowers...bags help

[01whiteoffroad]

ok so im going to run my djm 4" lowers with 2" mcgaughy's spindles in conjunction with kp cups(for djm arms) and 22's. i bought both sets of spindles from them, the ones that can clear 17" rim+, and the ones that will work with 16" rims...

i know in order for the 16" spindles to work, the lower balljoint has to be removed and flipped on the stock arms...my Q is this. what has to be done to run the 16" spindles with the djm arms?

[Mad Chemist]

...djm 4" lowers with 2" mcgaughy's spindles...

I know I'm not being helpful but isn't that a no-no?

[Beyond Static©]

It's not recommended to do on small diameter tires due to a low scrub line. Jon, I've been thinking, and have you considered just using the stock arms and the 17+ spindles? That will allow you to lay frame without any problems, and keep a pretty high scrub line. Here's a pic that has nothing to do with the front end though
http://img.photobucket.com/albums/v239/beyondstatic20z/100_4665.jpg
http://img.photobucket.com/albums/v239/beyondstatic20z/100_4659.jpg