Steel rallyes with DJM 2in spindle

[MaIibuSS]

Ok guys i want the 15in rallye rims on my truck but the ones on her now need 1/4in spacers in the front to clear the spindle what rallyes can i use that clear the front suspension with no spacer or rubbing and can accept a trim ring.

[diadora516]

just trim the LCA's down a little bit

[DjLunchbox]

you'll have to trim the lip of the LCA back a bit, and possibily grind down the tie rod a tad. 15's are hard to use with a 4" drop in the front. it can be done though. a spacer may be a good idea, but i normally wouldn't use them

[MaIibuSS]

Yeah i grinded the lcas down that was no biggie didnt have to take much at all my problem is the tierods i dont want to grind the tierod and i want that little extra 1/4in or so to stick out closer to the fender. Im running spacers now and they work great i popped some longer studs in there for extra security but i still feel a little unsafe with em , ya know. Anyone know if the steelies from like a caprice or impala have that little less backspacing to clear w/o spacers?

[DjLunchbox]

is it dropped yet? any pics?

[joakwin]

i pulled my steel rims from my uncles 74 1/2 truck and they work fine, no problems at all

and im running djm 2in drop spindles
with a mod djm lca for bags

i don't have any problems with the tierods also hitting on the rim itself

this is on my 93obs

[MaIibuSS]

is it dropped yet? any pics?


Yeah pics are up under bada bing...

Thanks Joakwin im gonna have to look for a set of those bad boys they look good

[joakwin]

Yeah pics are up under bada bing...

Thanks Joakwin im gonna have to look for a set of those bad boys they look good


thanks

keeping it old skool for my 93 since it is now old skool at 13years old

[poboychevy]

Yeah i grinded the lcas down that was no biggie didnt have to take much at all my problem is the tierods i dont want to grind the tierod and i want that little extra 1/4in or so to stick out closer to the fender. Im running spacers now and they work great i popped some longer studs in there for extra security but i still feel a little unsafe with em , ya know. Anyone know if the steelies from like a caprice or impala have that little less backspacing to clear w/o spacers?
:dieclown: wrong bolt pattern

[MaIibuSS]

:dieclown: wrong bolt pattern

Thought they were 5on5. Anyone know which cars/trucks had the 5on5 pattern?

[rev35]

:dieclown: wrong bolt pattern

hey :jackass: the capriice and impala are the same bolt pattern, call me crazy but have you ever seen a set of Imapla ss wheels on FSC cause I see them all the time. As far as the back spacing there I have no clue on the steelies.

[MaIibuSS]

ohh.. thought they were but wasent 100% sure as i never owned one