PDA

View Full Version : Cowl hood for 67-72?

BADASS2001CHEVY
08-07-2002, 05:45 PM
What company sells these hoods?
Thanks guys
BADASS:devil:
BaggedC10
08-07-2002, 06:32 PM
Goodmark Industries manufactures excellent steel cowl induction hoods. :read: :D


www.GoodmarkIndustries.com
BADASS2001CHEVY
08-07-2002, 06:34 PM
I want like a 4" or 6" Fiberglass is good too just want quality hood, Do they have one?
BaggedC10
08-07-2002, 06:36 PM
Nope, they only offer 2" cowl induction hoods. :(
BaggedC10
08-07-2002, 06:37 PM
:cool: :rocking:
BADASS2001CHEVY
08-07-2002, 06:43 PM
I want something thats atleast a 4", you know of any?
BADASS2001CHEVY
08-07-2002, 06:52 PM
I found this place anybody know about them?

Unlimited Power Induction
http://www.up22.com/

They sell 4-6-7 & 9...I will check them out
BaggedC10
08-07-2002, 07:04 PM
:nono: I have heard many negative comments about them. Fit/finish issues, and other quality problems. :read:
BaggedC10
08-07-2002, 07:11 PM
Try this company! :read:



www.USBody.com :D
BaggedC10
08-07-2002, 07:19 PM
USBody offers a 4" fiberglass cowl induction hood! :cool: :D
BADASS2001CHEVY
08-07-2002, 08:08 PM
That place is better? Well thanks for the warning any others?
bigred305
08-07-2002, 10:57 PM
You workin on a 72 Badass??
BaggedC10
08-08-2002, 02:33 AM
Originally posted by BADASS2001CHEVY
That place is better? Well thanks for the warning any others?



I would also consider Harwood! :read: I have no URL for their website though. :( PM CKTA or 454ss about this company! :D
BADASS2001CHEVY
08-08-2002, 05:17 PM
Harwood?? I heard some great things about this company are they good fit and finish?
BADASS2001CHEVY
08-08-2002, 05:17 PM
Originally posted by bigred305
You workin on a 72 Badass??

:devil: :devil: :devil: :devil: :devil:
BADASS2001CHEVY
08-08-2002, 05:32 PM
Link or site?
BaggedC10
08-08-2002, 05:41 PM
Originally posted by 5-8CHEVY
duh 1st page... usbody.com



:word: :whyme: :whyme:



















:kidding: :D
BADASS2001CHEVY
08-08-2002, 05:49 PM
:bawl: Sorry im blind
bigred305
08-08-2002, 06:31 PM
Originally posted by BADASS2001CHEVY


:devil: :devil: :devil: :devil: :devil:


:rocking: :rocking: :rocking: :rocking:
BADASS2001CHEVY
08-08-2002, 06:54 PM
67-72:naughty: :read:
BADASS2001CHEVY
08-09-2002, 08:05 PM
Does this look like a 4" or 6"?
http://www.usbody.com/images/FCG-76C.gif
Booger B
08-19-2002, 02:26 PM
4

do you still ahve the excab?
Captkaos
08-19-2002, 03:52 PM
I would personally go with the USBODY piece. It has alot better finish than Unlimited Performance=UP22. UP22 is more for racing/lightweight stuff. The fit and finish su(ks! Harwood from the ones I have seen and help install is unfinished on the underside and they took some time to get them installed. USBODY's stuff that I have helped install (and the tilt front end I have bought) has been top quality.

Harwoods site is this, Just a link, not a recommendation.: http://www.eharwood.com/fiberglass/
BADASS2001CHEVY
08-19-2002, 06:22 PM
Originally posted by Booger B
4

do you still ahve the excab?
For the new truck