Yukon drop help

[spot me 2]

I have a few ?'s
Is the belltech 3/3.5 drop the only way to drop a 2 door yukon or do I have other options?
The truck has 16" Escalade rims on it. Do you think is would look good lowered with this rims or should I go bigger?

[tahoehtp]

3/5 is all you got on those really.
otherwise you gotta bag it... better choice.
it probably look ok but you might want to go 20's..

[RaiN]

Just finished the front keys for mine, looks ok. Have to do the rear shackles for 2" in the rear tomorrow.

[CKTA]

You can do a 4/5". I lowered Garret Tahoe that way. 2" spindles/2" springs and a flip-lit w/ lift hanger in the rear. I bleieve his was Bell Tech....maybe DJM tho.

[RaiN]

What kinda offset wheel are you looking at using? I'm having a hard time finding one that won't rub.

[BlazinX]

You can do a 4/5". I lowered Garret Tahoe that way. 2" spindles/2" springs and a flip-lit w/ lift hanger in the rear. I bleieve his was Bell Tech....maybe DJM tho.
:nono: You cant use spindles/springs on a 4x4. Its all bout teh torsion keys.

[92 BLAZE]

YES! U can go lower than 3-3.5 inches in the front end. I have a 92 BLAZE 4WD and got her down ta 5 INCHES! most lame ass shops won't go lower than 3 but with the belltech keys U can crush it a lot lower. but again at this height, U would have 2 roll your front fenders. check out my gallery 4 more details and pics 2 prove! Oh yeah, Do it right buy some 22'z 4 better results.
20's went out of style 5 yrs ago.

[CKTA]

Whoops, when i posted his sig. wasn't up......didn't know it was a 4x4.