Removing Bug Shield?

[Renea]

I have a big problem. The guy who owned it before me. Had this bug shield. And i tried removing it. And the screw are so far rusted and stripped. I don't know how to remove it. What can I do?

[Firestrike87]

I have had great luck with the craftsman stripped screw set. I'll try and find a pic for you.

EDIT: Here is a link
Craftsman 52154 3 pc. Screw-Out™ Damaged Screw Remover Set at Sears.com (http://www.sears.com/sr/javasr/product.do?BV_SessionID=@@@@1087263102.1184810570@@@@&BV_EngineID=ccjeaddlhjhfehmcefecemldffidflk.0&pid=00952154000&vertical=TOOL&ihtoken=1)

[Joe]

Or you can CAREFULLY drill them out

[hornsfan10609]

I've drilled them out before, and there is a new tool that drills out the screw to a cone shape, and has a reverse threaded bit that screws into it and pulls it out. Looks like it worked well in the comercial.:D

[iminaquagmire]

Before you go out and buy a screw extracter, try grinding a slot in it with a dremel tool or if you have a lot of time, a hacksaw blade. Then you can use a flathead screwdriver on it.

If you do buy an extractor, don't skimp on it. You can easily break the bits in cheap kits.

[Firestrike87]

Before you go out and buy a screw extracter, try grinding a slot in it with a dremel tool or if you have a lot of time, a hacksaw blade. Then you can use a flathead screwdriver on it.

If you do buy an extractor, don't skimp on it. You can easily break the bits in cheap kits.
I have done the hacksaw trick before with good luck. I forgot about that, give it a try first.

[Giterdun]

They make a product called screw lose...?