Hypertech PPIII, shift point settings????

[Crew06]

I have a hypertech power programmer III that I have installed on my 2006 Silverado Z71 Crew cab 5.3L eng. Does anyone have any suggestions for settings on the shift points that would like to share?

I have see other posts where it shows 1-2 +3, 2-3, +6, etc....that is in MPH> My programmer asks for the shift point increase/decrease in +/- RPM up or down by 500 RPM in 100 rpm increments. I almost tried it but the book said if I did it wrong it could damage in the engine and/or tranny.

My current settings are as follows:

- 87 Octane
- 128 mph on top speed
- 50% shift firmness
- Stock Rev Limiter
- Stock shift points
- Stock tire size
- Stock rear axle

Any suggestions would be greatly appreciated. Thanks...

[julianknives]

I use thr hypertech (max energy) on my 2005 5.3l 4x4 extended cab. My selections are as followed, 87 oct, max rpm 5700, 1-2 -300,2-3 100,3-4 100 and changed the tire size to 32 becouse i have 285/70/17 lastly shift firmnest 100%. Let me know if this helps i am still working with my to find the sweet spot 0-60 is on avarage 8.0

[julianknives]

I am still making changes to mine i will keep you posted