FaintReality
11-19-2007, 03:14 PM
I have a pair of custom enclosures built by the famous MR Marv, in which these need to go since I no longer have the truck. They were built specifically for the DIYMA 12" drivers (((also for sale / brand new never used))), but can be used for any driver w/ an ideal volume requirement of ~.7 cu ft
These enclosures were custom build to fit under each side of the rear bench seat in my 05 Chevy 2500HD w/ the use of a 2.5" rear seat lift (((purchased from ibthumpin))). I planned to connect the two enclosures with an amp rack in the middle, and make everything look stock by building a front & side facias w/ 1/8" thick wood wrapped in carpet.
These enclosures have rounded edges, counter sunk baffle to flush mount the 12" drivers, holes drilled for the subs and terminals, as well as have been painted a matte black (8/10 on the paint... two nicks need touched up if you don't plan to build the side facias like I had planned).
Dimensions are as follows (all outer dimensions):
Front Height: 8 3/8"
Rear Height: 10 3/8"
Width: 15"
Top Depth: 14 1/4"
Bottom Depth: 12 1/8"
Mounting Depth: 8"
Air Volume: ~.7 cu ft
Please let me know if interested or have any questions. I paid $270 and am open to any reasonable offers.
Thanks, Dave
http://i54.photobucket.com/albums/g114/faintreality/100_2277.jpg
http://i54.photobucket.com/albums/g114/faintreality/100_2276.jpg
http://i54.photobucket.com/albums/g114/faintreality/100_2275.jpg
http://i54.photobucket.com/albums/g114/faintreality/100_2274.jpg
http://i54.photobucket.com/albums/g114/faintreality/100_2273.jpg
http://i54.photobucket.com/albums/g114/faintreality/100_2272.jpg
http://i54.photobucket.com/albums/g114/faintreality/100_2271.jpg
http://i54.photobucket.com/albums/g114/faintreality/100_2278.jpg
http://i54.photobucket.com/albums/g114/faintreality/100_2280.jpg
http://i54.photobucket.com/albums/g114/faintreality/100_2279.jpg
***The pic below is what my plan would have looked like w/ the amp rack and front/side facias***
http://i54.photobucket.com/albums/g114/faintreality/518721_247_full.jpg
These enclosures were custom build to fit under each side of the rear bench seat in my 05 Chevy 2500HD w/ the use of a 2.5" rear seat lift (((purchased from ibthumpin))). I planned to connect the two enclosures with an amp rack in the middle, and make everything look stock by building a front & side facias w/ 1/8" thick wood wrapped in carpet.
These enclosures have rounded edges, counter sunk baffle to flush mount the 12" drivers, holes drilled for the subs and terminals, as well as have been painted a matte black (8/10 on the paint... two nicks need touched up if you don't plan to build the side facias like I had planned).
Dimensions are as follows (all outer dimensions):
Front Height: 8 3/8"
Rear Height: 10 3/8"
Width: 15"
Top Depth: 14 1/4"
Bottom Depth: 12 1/8"
Mounting Depth: 8"
Air Volume: ~.7 cu ft
Please let me know if interested or have any questions. I paid $270 and am open to any reasonable offers.
Thanks, Dave
http://i54.photobucket.com/albums/g114/faintreality/100_2277.jpg
http://i54.photobucket.com/albums/g114/faintreality/100_2276.jpg
http://i54.photobucket.com/albums/g114/faintreality/100_2275.jpg
http://i54.photobucket.com/albums/g114/faintreality/100_2274.jpg
http://i54.photobucket.com/albums/g114/faintreality/100_2273.jpg
http://i54.photobucket.com/albums/g114/faintreality/100_2272.jpg
http://i54.photobucket.com/albums/g114/faintreality/100_2271.jpg
http://i54.photobucket.com/albums/g114/faintreality/100_2278.jpg
http://i54.photobucket.com/albums/g114/faintreality/100_2280.jpg
http://i54.photobucket.com/albums/g114/faintreality/100_2279.jpg
***The pic below is what my plan would have looked like w/ the amp rack and front/side facias***
http://i54.photobucket.com/albums/g114/faintreality/518721_247_full.jpg