OBS front cup?

[Ryan P]

I have the EKSTENSIVE front cup kit were is the best place to run the airline out, i have to drill my own hole? My valves are mounted on the frame under the doors. Does the short or tall side of the bottom cup go towards the tire?

[Marcos]

Tall cup goes on the top. i used the shock hole, drilled it out bigger and ran the airline under the doors.

[Ryan P]

Ok the bottom cups are tapered but both are the same like i got 2 for the same side of the truck. One side is 2 other is 2.3/8's thats centered on the holes from front to back. I got 90 degree fittings do i need to get strait ones? I want it to look clean don't care to do more work tho.

[ikon]

90 degree fittings will be fine...just drill a hole in the upper cup to run your airline to the the fitting...

[Marcos]

You have pics of these mystery cups, I know mine arent tapered

[Ryan P]

Sure let me upload them to photobucket

http://img.photobucket.com/albums/v487/prophanger1/kx250061.jpg
http://img.photobucket.com/albums/v487/prophanger1/kx250062.jpg

[White_Stealth]

90 degree fittings will be fine...just drill a hole in the upper cup to run your airline to the the fitting...

:word:

This is how I did mine to hide my airline in the frame.

EDIT: Just remember to put a rubber bushing/o-ring on it to keep from wearing a hole in your airlines.

[1lo98]

I have the same ones ekstensive tapers them to give the bag a little better angle a full lift and i did the same cut a hole in the side and run a 90