1992 350 TBI single turbo

[1sweetss]

I have a 1992 chev 350 tbi and I was looking into a single turbo with intercooler moderate boost 10psi. I am planning to use a msd 6462 6Btm ignition controller and better than stock fuel pump along with an aeromotive boost reference regulator on the fuel return line. I have researched the net and found not alot of information if this will work. If anyone has any advice please write back.

[Fast305]

I have a 1992 chev 350 tbi and I was looking into a single turbo with intercooler moderate boost 10psi. I am planning to use a msd 6462 6Btm ignition controller and better than stock fuel pump along with an aeromotive boost reference regulator on the fuel return line. I have researched the net and found not alot of information if this will work. If anyone has any advice please write back.

I would hold off on the ignition controller, buy the EBL, 2-bar MAP sensor, and a Prom Burner. With the EBL you will have full control over your fueling both NA and Boosted.

[1sweetss]

Thanks for the tip I looked on the net to find out more on the ebl, 2bar map sensor and a prom burner but not much success on information on how to use it or where to buy it.

[1BadZ71Tahoe]

Thanks for the tip I looked on the net to find out more on the ebl, 2bar map sensor and a prom burner but not much success on information on how to use it or where to buy it.

dynamicefi.com

[oldred95]

You really need to join www.thirdgen.org if you are serious about this. For the EBL PM RBob on thirdgen and he can tell you all about it. Its my understanding he helped build/put together the system. As for the prom burner and actual tuning hardware I would go to www.moates.net

I'm sure there are other places but they are the only one's I've dealt with and they have been excellent. Super fast shipping and high quality parts.