FINALLY did my exhaust

[gasjob2500hd]

chevy 2500hd 6.0 k/n fipk intake
2 super 40s out the stock piping w. a 4.5 inch tip

http://s49.photobucket.com/albums/f270/jwints28/?action=view&current=americanthunder019.flv

http://i49.photobucket.com/albums/f270/jwints28/americanthunder013.jpg

http://i49.photobucket.com/albums/f270/jwints28/americanthunder016.jpg

http://i49.photobucket.com/albums/f270/jwints28/americanthunder005.jpg

[PHATSPEED7x]

Sounds good.

[gasjob2500hd]

thank you

[traxshin]

sounds good. i had ordered a flow from summit and had a local exhaust shop weld it on the stock pipes. it sounds good but they hung the muffler too low...makes it looks like its hanging from the passenger side. i was too lazy to take it back right away and now the shop is closed up.

your install looks better than what a shop did on mine!!

[gasjob2500hd]

thanks traxshin ur truck wins the over all tho haha i really like ur wheels

i bet u did what i did at 1st i ordered the center in center out but i held em up and was like no way they will hang down to much so i got offset in center out and thats y they are farther up where u cant see em

[traxshin]

thanks. the wheels are really starting to grow on me. everyone else has liked 'em on the truck alot at first sight.

i just ran out to the garage and checked. i have the dual in and single out. flowmaster sent a single outlet pipe to run from the muffler to the stock tailpipe.

i see what u did. you have two single in mufflers, right? then ran both of them into the stock y-pipe that goes into the stock tail? that's what i should have done. there's PLENTY of room on mine to have mounted two of 'em vertically as opposed to my one mounted horizontally.

[gasjob2500hd]

yea what did u put a y pipe before the muff and then have the factory one after it yea order the 2 same muffs i have they sound great did u have ur wheels painted??? cause im not finding them colored anywhere? and they look blue where the black normally is or is it just me?

[traxshin]

no y-pipe. the flow is a dual in / single out. the only alteration to the factory exhaust was removing the y-pipe after the muffler and replacing it with a single pipe into the single tail which flowmaster supplied.

the wheels are just dc-1 blacks and i haven't done anything to them.

http://www.dickcepek.com/images/DC1_BlackLg.jpg
http://www.dickcepek.com/DC1.html

[traxshin]

no y-pipe. the flow is a dual in / single out. the only alteration to the factory exhaust was removing the y-pipe after the muffler and replacing it with a single pipe into the single tail which flowmaster supplied.

the wheels are just dc-1 blacks and i haven't done anything to them.

http://www.dickcepek.com/images/DC1_BlackLg.jpg
http://www.dickcepek.com/DC1.html

[traxshin]

i dont know about you but fsc when dead last night on my end. i tried posting my last post but it wouldn't open up. i turned it on this morning and it had posted twice.

oh well, gotta go to work now. i was just checking to make sure my last post got on there.