2low4nd's OBS RCSB 91 GMC converted Bag PROJECT, pictures inside. here we go!

[2LOW4ND]

edit 1-30-08 picture updates.


edit 1-28-08 bad mistake- check the last page!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
This was found out after i decided to keep and make the wheels work!!!!!!!!!!!!!!


edit 1-15-08 there are updated pictures further through the thread guys.







Sorry for the ****ty cell phone pictures. Ill will have nice pictures with my digi from here on out!
Well got my truck to the shop tonight and got an ok start on it. It was kinda late by the time I got off work and it up there.
First tonight we torr off all the JC Whitney bull**** that was on it, haha. Bug gaurd, chrome frender trim, mudflaps, cheap bedcover, factory moldings etc. Cut some exhuast off, and took the bed off.

Tomorrow will be clean up the rest of the body and take the rest of the rocker panels off, and take the dorky pinstrip off and stat with some notching and on with the bag stuff.

As some of you know im worried about fitting my ZR1 Vette wheels on the back... 17x11s i think i screwed up on that move, we will see.

Anyways, I will keep updates as we go, should have the truck done in about 3 weeks.

I will keep everyone posted with pictures and info.

Im amped!!!

now with some ****ty pictures.

http://img.photobucket.com/albums/v303/91FULLSIZE/0107082200.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/0107082202a.jpg

http://img.photobucket.com/albums/v303/91FULLSIZE/0107082205a.jpg

http://img.photobucket.com/albums/v303/91FULLSIZE/0107082336.jpg

[96thebossgrnchv]

looking forward to seeing the progress unfold man!

[2LOW4ND]

oh yes, almost forgot, do i need 2" drop spindles to lay out up front?
With stock arms?

[Marcos]

Not unless you want to lay a 27" tire or bigger, But you wont have to cut as much, I strongly recommend them...

[iLLimpulse]

Who is this... Kyle??

Its Corey from Winnipeg.

[BagginA93chev]

good progress so far keep us updated!

[2LOW4ND]

Who is this... Kyle??

Its Corey from Winnipeg.

No this is a good buddy of kyles and adam and Steve and AJ. I take it your gonna know all of them. We have been friends for years. Im actually going to be Adams brother in law after this summer his older sister and I are getting married. And Steve is my best man. sorry that was Offtopic. I take it you meet them up with them at a few shows.

Im Mikey by the way, haha.


More updates tonight guys!

[project 92]

Hey Corey its Dan from winnipeg nice to see you on here..

[project 92]

Sorry 2low. Clean lookin truck!!

[iLLimpulse]

No this is a good buddy of kyles and adam and Steve and AJ. I take it your gonna know all of them. We have been friends for years. Im actually going to be Adams brother in law after this summer his older sister and I are getting married. And Steve is my best man. sorry that was Offtopic. I take it you meet them up with them at a few shows.

Im Mikey by the way, haha.


More updates tonight guys!

Yeah I know all those guys, we went to reso 2 years ago with them, and ITB the past 2 years, and they've come up here to our show the past 2 years as well.

You'll have to join them this year!

Kyles truck is lookin killer now that its finished!

Lookin forward to the progress on this one!

[iLLimpulse]

Hey Corey its Dan from winnipeg nice to see you on here..

Haha.. what up dude!

[92 Z71]

I'm jealous man, can't wait to see it done.

[2LOW4ND]

No updates tonight, left the camera at the shop. the next few days should be killer though. Thanks for the support guys.
Oh and Corey i told Kyle whats up for ya tonight. haha.

[bizzybone485]

Cant wait to see this buildup. ITs gonna look good. If you cant get the rims to fit i would say make them fit...lol. Cut the bed if anything... tub it. Its not like its gonna look bad...just more work. Good luck. Looking forward to this post.

[2LOW4ND]

EDIT THESE ARE THE FRONT WHEELS NOT THE REAR - 1-30-08 update.

Taking a night off, the camera is still at the shop so again no updated pictures of the truck.
my ZR1 wheels came in today and they are actully measuring 17x10.5 a little less. Im thinking with the flat front face of he wheel and no lip it will deff tuck even with a 1.25" adapter. Being there is no front lip. And Being is a 10.5" wide wheel im thinking the space should pull it away from my 4 link just enough, what do you guys think??

Tomorrow i really will find out.

crappy cell phone pictures of the wheels.
I really think with a 50mm offset at 17x10.5" wide they will fit with the 1.25" adapter.

http://img.photobucket.com/albums/v303/91FULLSIZE/0109081943.jpg

http://img.photobucket.com/albums/v303/91FULLSIZE/0109081942.jpg

[96thebossgrnchv]

i'm pretty sure they'll fit too, c4 rims have tons of backspacing

[2LOW4ND]

i'm pretty sure they'll fit too, c4 rims have tons of backspacing

I was kinda curious on turning radius with 17x9.5 up front too. Im doing a test fit tomorrow if my damn adapters show up.

[96thebossgrnchv]

i think tbichevy has some wide rims up front, not sure how wide though

[2LOW4ND]

Thats right he posted in my other thread on the wheels.

[ikon]

Ballin!

[2LOW4ND]

what is 50mm offset in inches????

[2LOW4ND]

Ballin!

Im not sure if they are gonna fit, thats why i was asking about your wheels that you have for sale...

[ikon]

1.968503937007874 inches and my wheels are six lug...just thought of that

[AZdragginsoon]

lookin good man

[2LOW4ND]

1.968503937007874 inches and my wheels are six lug...just thought of that

So thats 9 inches of backspace then, then a 1.25" adapter so that is 7.75 inches of backspacing.

Wait i forgot the wheel was 10.5 and not 11...

Ahh forget it im shot. Ill figure it out tomorrow.

[2LOW4ND]

TPICHEVYs

post in another thread.

Hey man i was in the same boat your in now a while back! i was lookin to run the zr1 wheels also and i have come up with a bunch of info for the swap! i still would like to grab some black zr1s for the track!! i ended up findin some 17x9.5s w/5.5"bs and 17x11s w/7"bs there a tight fit but they look sick!!
anyways here is a bunch of the info for ya! keep us posted bro, its goin to look sick!!!
17x9.5=38mm-6.7"
17x9.5=56mm-7.4"
17x11=36.5mm-7.4"
17x11=50mm-7.95"
http://www.fullsizechevy.com/forums/...-bad-idea.html

Best adapters made out there IMO!!
http://www.skulte.com/index.php/cPat...a3f7979d121372
http://www.fullsizechevy.com/forums/...w-o-tubin.html

454ss is runnin adapters and is makin a **** ton of HP with no probelms!
http://www.454ss.com/hosts/web/members/sixspeedss/
http://www.fullsizechevy.com/forums/...archid=2198965

[4mcrue]

So, I guess we aren't going to the desert next spring??
LOL.

[bizzybone485]

i cant wait to see those on there. I see them fitting very well but choose your tires correctly. Thats my $.02. Its gonna look sick!!

[2LOW4ND]

So, I guess we aren't going to the desert next spring??
LOL.

haha, dont think so dave.

[2LOW4ND]

i cant wait to see those on there. I see them fitting very well but choose your tires correctly. Thats my $.02. Its gonna look sick!!
Thats what im thiking. I see guys running 10 wide all the time with less of a backspace and more of a front lip on the wheels and they fit. Im running the max amount of backspace no lip and spacer so I get my 4 link mounted up and the wheels and spacers to the shop i wont know. Its driving me nuts.

[99gixxer]

this is gonna be sweet.

-subscribed-

[2LOW4ND]

I keep leaving my lovley high quality canon digi at the shop. There will be tons of pictures up in the next few days. As for a setup goes its nice and clean. Everything will be mounted under the bed. Two Guages in a guage pod in the cab. One guage for the tanks and one dual needle guages for the front bags and rear bags. Im running up down, front and back. No side to side.
2 - chrome viar 400s
4 - SMC Fill Vavles 1/2 inch
4 - SMC Dump Vavles 1/2 inch
1 - 8 gallon 8 port tank
2 - Front conititech 4 ply 2600
2 - Rear conititech 4 ply 2600
1 - Dual needle easy street guage for bags
1 - Single needle east street guage for tank
2 - rolls 50 feet of air line for guages
1 - roll 50 feet of air line for vavles
1 - 1/2 water tap
1 - viar pressure switch and relay
2 - water traps

For metal.

KP 4 link
Front cups
2" drop spindles
Front shock relocator kit
Rear shock relocator kit
Rear bag mounts
Step Notch

[ikon]

is there any way i can talk you into fbss...please...cause ill tell you flat out right now youre gonna have so much damn body roll on that bitch with f/b ur gonna hate urself for not spending the xtra money and running 8 valves.

[|3lack$ilverado]

is there any way i can talk you into fbss...please...cause ill tell you flat out right now youre gonna have so much damn body roll on that bitch with f/b ur gonna hate urself for not spending the xtra money and running 8 valves.


The setup he posted has 8 valves.

[tonxcab]

good luck imo i think the wheels be bad ass

[ikon]

The setup he posted has 8 valves.

well he said hes just running f/b...not f/b/s/s. i didnt actually take the time to read the individual parts list

[2LOW4ND]

well he said hes just running f/b...not f/b/s/s. i didnt actually take the time to read the individual parts list

Im wiring them up that way. Still running 8. Thanks for looking out though dave.

[ikon]

werd

[drpdshrty]

my wheels are 10" wide with 6" backspacing. all i did was roll the rear fender lips. I did add a rear sway bar to help with body roll.

[2LOW4ND]

my wheels are 10" wide with 6" backspacing. all i did was roll the rear fender lips. I did add a rear sway bar to help with body roll.
So from what you saw with my math and backspace and offset, sounds like it should be close, huh? Im running a little more backspace with a 1.25" spacer. Might be right on??
This is tricky cuz there are only you and TPICHEVY who are running this wide of a setup without tubbing.
From what im aware of.

Thanks for chiming in.

[drpdshrty]

man i wish i could help more. i bought my wheels from a guy that put the wheels on his truck so the math was already figured out for me and i knew they would fit. Good luck bro!!

[2LOW4ND]

Well the past few days havent been to progressive Ive been so busy at work. Tomorrow we are going to finish all welding and bracing in the rear..

Now on with some high quality smaller pictures.

http://img.photobucket.com/albums/v303/91FULLSIZE/truckproject001-1.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/truckproject002-1.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/truckproject003-1.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/truckproject004-1.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/truckproject005-1.jpg



http://img.photobucket.com/albums/v303/91FULLSIZE/truckproject006.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/truckproject007.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/truckproject008.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/truckproject011.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/truckproject012.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/truckproject013.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/truckproject014.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/truckproject015.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/truckproject016.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/truckproject017.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/truckproject019.jpg

[2LOW4ND]

Leader of the pack buddy kyle Severed Ties member ND president.
Live welding action.
http://img.photobucket.com/albums/v303/91FULLSIZE/th_truckproject021.jpg (http://smg.photobucket.com/albums/v303/91FULLSIZE/?action=view&current=truckproject021.flv)

[2LOW4ND]

Still waiting on adapters to see if i can fit the vette 17x11" wheels out back. There suppost to arrive weds.

[Gran Patron]

cool, man!! I wanna see how those ZR1 wheels are going to look.:rocking:

[bizzybone485]

I cant wait for pics of those wheels on there bro. There gonna look so nice!

[2LOW4ND]

http://img.photobucket.com/albums/v303/91FULLSIZE/truckproject008-1.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/truckproject006-1.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/truckproject005-2.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/truckproject004-2.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/truckproject003-2.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/truckproject002-2.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/truckproject001-2.jpg

[2LOW4ND]

Well here is some more progress pictures from tonight. Its coming right along.

[2LOW4ND]

Well the adapters came in and did some pre fitting and measuring, but it looks like the 17x11" vette wheels are going to fit!!! They arnt even close to rubbing the 4 link, there is like a good 3" left behind the wheel to the link bars. Pretty damn amped on this ordeal. It looks like i have a good inch from it rubbing the rear fender lips NOT ROLLED! According to my measurements. But till the beds on i dont know for sure. But it looks like there is alot more room then i had thought.

Sorry i dont have pictures forgot the camera tonight, but i know alot of people are curious about the fitment of my width in the rear.

[99gixxer]

very nice work. i hope you dont accidently run over anything with the ports facing down on the tank.

[Marcos]

:word: I would change the way the tank is mounted.

[96thebossgrnchv]

yeah, water and crap might drain into the valves, can't wait to see those wheels on it!

[2LOW4ND]

The tank isnt mounted, just throwing around ideas. Thanks for pointing those flaws of that layout, out. haha.
Im amped to get those wheels on the truck or for that matter get this finished up and on the ground.

[96thebossgrnchv]

ya'll are making good progress!

[2LOW4ND]

ya'll are making good progress!

Thanks, we havent even worked on it much this week.

And we are taking this weekend off, we are all burnt out from our jobs and working the past few weekends at work. That the truck will be on hold this weekend cuz yet again we are working. But it should be finished after next week. And we will be back at it hard on monday night.

[Chop Top]

This thread is awesome !! It's nice to see a truck turn around in a matter of days/weeks instead of months/years. I sooooo needed the instant gratification that is this thread. :D

CT



p.s.- shouldn't it be like negative 20 in ND this time of year ?

[2LOW4ND]

This thread is awesome !! It's nice to see a truck turn around in a matter of days/weeks instead of months/years. I sooooo needed the instant gratification that is this thread. :D

CT



p.s.- shouldn't it be like negative 20 in ND this time of year ?

That is kickass to hear man. we are busting ass. Nice to be some insperation and gratification for you and others.

as for weather we have our major cold spell once a year like -1 or -2 for a few weeks. Which we are having right now. MN is alot worse along with Canada during the winter months. We have had it pretty nice here for the last few winters not much snow and mild winter temps anywhere from 35-50 degrees for highs. Summers are still about 100+ like the desert. Kinda funny how extreme we can be here. We really only have had winter for 5 out of the 7 months the last 5 years. Less snow the the upper east coast and warmer. Not as bad as people talk about. I used to live in So.Cal so i know how it can be all year around in the desert.
Anyways.

[ikon]

its -5 here with a -17 windchill w00t

[4mcrue]

MIKE, we need to go out for beers so I can FIX you, LOL:
http://i7.photobucket.com/albums/y260/4mcrue/iwNzY1MTcwNnM0MTNkZmQzMXk1NDE3D.jpg

[BigBadBowtie572]

Nice build so far.:D Can't wait to see it unfold for a fellow ND FSC member.

Looks like I'm going to have to make a trip out west this year and check out some of you all in Bismarck.

[AntiBling]

Any close ups of the welds?

[2LOW4ND]

I can snap some if you want them.

[2LOW4ND]

haha dave, i have been bagging trucks for year now and will be doing it to trucks from here on out 4lyfe!.. Boo the lift! actually, im getting ready to buy a 3/4 TON hauler GMC to pull the truck im building right now to shows. haha Nice picture of my good old lifted truck nice!

[2LOW4ND]

its -5 here with a -17 windchill w00t

No ****, the same deal here. Gotta love our uppermidwest winters!:nopity:

[2LOW4ND]

Oh yes ive been so busy with work and everthing that i forgot to post a parts update.

A couple days ago I ordered more parts!!!
rollpan
10 way switch box
chrome shorty headers
summit racing welded muffler
with that follows custom exhaust true duals and no cat into the dumped muffler.
slotted front rotors and upgraded brake pads

upnext is
rear disc brake conversion kit
posi

and thinking about
Edelbrock Performer Multipoint EFI system - comments welcome.
Along with a high pressure fuel pump and regulator since the bed is off.

more pictures to come as of later this week with the bag project!

[2LOW4ND]

Any close ups of the welds?


Direct from Kyle.
First out off over 900 trucks. <ST>

Watch for the cover in th next couple of months.

he laughed when you asked about welds. :eek:

http://img.photobucket.com/albums/v303/91FULLSIZE/13200885947PM56351.jpg

[AntiBling]

he laughed when you asked about welds. :eek:


:think: So does that mean I'm not getting pictures?

[2LOW4ND]

:think: So does that mean I'm not getting pictures?

i actually dont have any real close up pictures. most the pictures i have taken so far is what i have posted up.
i can get some next time im at the shop.

[2LOW4ND]

Well i might be selling the ZR1 Vette replica wheels if anyone is interested??

[96thebossgrnchv]

damn, getting some 20's?

[2LOW4ND]

Im thinking about it. Im throwing the idea around. I have alot of time to decide, its the dead of winter here still so once the truck is bagged its going right back into my garage and will sit until spring. So im seeing what i can put together. If i can sell the 17x9.5 and the 17x11s fast i might pick up a set of 20s right away. If not ill just wait. We'll see what happens.

[bizzybone485]

looking for some centerlines? Maybe interested in a trade if yo uget some nice tires mounted on there. Just to throw it out there. Brand new tires all the way around but i like your idea of the 17s.

[2LOW4ND]

looking for some centerlines? Maybe interested in a trade if yo uget some nice tires mounted on there. Just to throw it out there. Brand new tires all the way around but i like your idea of the 17s.
Well im working a pretty sweet deal out with someone on some 20s now. PM me let me know what your thinking?

[2LOW4ND]

Edit




Major mistake on my part, been busy with the truck project. As most of you guys know so many parts being shipped in, not so much time with work. I wasn't paying attention when I received my shipment of ZR1 VETT wheels. I had grabbed the wrong box and grabbed the box containing the front wheel, 17x9.5, which truley measures 17x10.25. I had posted this in other threads stating that the rear wheels were going to be this when actually they are going to be 17x11, truley measuring 17x12. My bad. With this extreme offset of 50mm + I have enough rear space with my KP 4 link to fit but I am worried about it tucking now. I guess this is a test and trial on my part, let's see if I can pull it off. Wow! Big mistake.

[Inverter]

Build looks good,Thanks for the link. Ill be watchin,,,so do more work haha!

[2LOW4ND]

Build looks good,Thanks for the link. Ill be watchin,,,so do more work haha!


Thank you sir! Sorry for the lack of updates guys just havent had time to upload and host them. There will be updates as soon as i get the digi home in the next couple days.

[2LOW4ND]

Well here are the long over due updates.

I need someone without tires on there wheels with a truck sitting just like mine to measure from the outside of the wheel across the the outside of the other wheel- can i find that person???

ON WITH THE UPDATES.


http://img.photobucket.com/albums/v303/91FULLSIZE/TruckProjectmoreofit001.jpg

http://img.photobucket.com/albums/v303/91FULLSIZE/TruckProjectmoreofit002.jpg

http://img.photobucket.com/albums/v303/91FULLSIZE/TruckProjectmoreofit003.jpg

http://img.photobucket.com/albums/v303/91FULLSIZE/TruckProjectmoreofit005.jpg

http://img.photobucket.com/albums/v303/91FULLSIZE/TruckProjectmoreofit006.jpg

http://img.photobucket.com/albums/v303/91FULLSIZE/TruckProjectmoreofit007.jpg

2" drop spindles yessir.

http://img.photobucket.com/albums/v303/91FULLSIZE/TruckProjectmoreofit008.jpg

my crossdrilled and slotted rotors
http://img.photobucket.com/albums/v303/91FULLSIZE/TruckProjectmoreofit009.jpg

http://img.photobucket.com/albums/v303/91FULLSIZE/TruckProjectmoreofit010.jpg

http://img.photobucket.com/albums/v303/91FULLSIZE/TruckProjectmoreofit011.jpg

http://img.photobucket.com/albums/v303/91FULLSIZE/TruckProjectmoreofit012.jpg

http://img.photobucket.com/albums/v303/91FULLSIZE/TruckProjectmoreofit013.jpg

On with the monsters! 17x11
http://img.photobucket.com/albums/v303/91FULLSIZE/TruckProjectmoreofit014.jpg

http://img.photobucket.com/albums/v303/91FULLSIZE/TruckProjectmoreofit015.jpg


still about 2" of clearance between the wheel and kp 4 link.
http://img.photobucket.com/albums/v303/91FULLSIZE/TruckProjectmoreofit016.jpg

http://img.photobucket.com/albums/v303/91FULLSIZE/TruckProjectmoreofit017.jpg

http://img.photobucket.com/albums/v303/91FULLSIZE/TruckProjectmoreofit018.jpg

http://img.photobucket.com/albums/v303/91FULLSIZE/TruckProjectmoreofit020.jpg

[ikon]

sexy man!! for sure

[wagonproject]

Looks good man. I would suggest an AVS box over that bulky 10 switch. I have one in both my s10's and love them. A lot smaller and easier to use.

[2LOW4ND]

Of course, it sexy. I just have to find out if i can pull off a zr1 vette wheel that truely measures 17x12... If i do make it fit. I guess i will be the first obs truck to be bagged layed out and tucking this wide of a wheel without a tub.

[Toolman]

If I am not mistaken wheels are measured from the inside not the outside of the lip. At least that is the case the with Intros that I have.

[2LOW4ND]

If I am not mistaken wheels are measured from the inside not the outside of the lip. At least that is the case the with Intros that I have.


This helps me how???

Need the physical measurement.. Im trying to fit a wheel on a bagged OBS truck that hasnt been built or bolted on b4 along with adapters. so far i have been correct with offest and bolting up with spaces and clearing with a kp 4 link.

[2LOW4ND]

If I am not mistaken wheels are measured from the inside not the outside of the lip. At least that is the case the with Intros that I have.


if you wanna be a great help click this link..

http://www.fullsizechevy.com/forums/general-discussion/street/307043-help-need-measurement-picture-inside.html

[Inverter]

Couldnt you just measure the bed wheel wells,,lip to lip? that would give you the maximum width. Those wheels are wide man,dont know if they'll fit but they are nice. Hope it works out!

[2LOW4ND]

Couldnt you just measure the bed wheel wells,,lip to lip? that would give you the maximum width. Those wheels are wide man,dont know if they'll fit but they are nice. Hope it works out!

I tried, but couldnt get a very good measurement. My beds tipped upright, and i was the only one at the shop last night so i had troulbe taking measurements. Ill have to just set the bed back on the truck here and see if it physically will work. Its just that close.

[bizzybone485]

Those look nice out back. I hope they fit for your bro. Im sure its gonna look wicked clean when your done if it does. Good luck

[2LOW4ND]

I should have bought Z06 or C5 wheels. They would have tucked for sure in the back. the ZR1 wheels have the widest wheel and the least backspace.
If the rears dont work, i might just order a pair just like the front 17x9.5....
Booo that.

[Inverter]

Get someone to hold one end of the tape,and measure the bed. Lot less labor than tryin to set the bed over the wheels,,might even scratch em or bang the box up against them and you still have to set the box back where it was.. I hate lifting stuff if I dont have to.

[2LOW4ND]

Get someone to hold one end of the tape,and measure the bed. Lot less labor than tryin to set the bed over the wheels,,might even scratch em or bang the box up against them and you still have to set the box back where it was.. I hate lifting stuff if I dont have to.


HAha, i hear ya. What im gonna do is take the wheels off and set the bed back on and then bolt the wheels back up, as soon as i get back to the shop with a few buddies and throw the bed on. Thats going to be the only way.

[tpichevy]

Im excitied....its the moment of truth!! lets hope they work out for ya!!

[Inverter]

That'll work. You can trim the fender lips if needed.Just leave about an 8th inch and file it. Remember you will have some sidewall stick out beyond the wheel lip. Good luck!

[2LOW4ND]

Well its gonna be another week b4 i get the bed back on, i still have to cut it for the notch, etc.
Im really overkilling on this wheel situation. Sorry.

[Inverter]

Well its gonna be another week b4 i get the bed back on, i still have to cut it for the notch, etc.
Im really overkilling on this wheel situation. Sorry.
Dont sweat it,,You can just measure and it will tell you if it will work or not.If its so close that you need to put the bed on to know for sure,,then it probably will rub.Im a big fan of the tape measure,,can you tell? hahaha!

[2LOW4ND]

Dont sweat it,,You can just measure and it will tell you if it will work or not.If its so close that you need to put the bed on to know for sure,,then it probably will rub.Im a big fan of the tape measure,,can you tell? hahaha!


As am I haha. And yes i can tell. But being it is that close you are probably correct, they wont fit. But im thinking in the back of my head, i really want the bed on to really find out for sure so i can move on and just order the same size wheels im running in the front. Till this happens im going to be on pins and needles. :nopity: haha.

[ikon]

just noticed this...but dont plan on running ceramic pads with those rotors...just a heads up

[2LOW4ND]

just noticed this...but dont plan on running ceramic pads with those rotors...just a heads up
They came with the pads to go with the rotors. Again thanks for looking out Dave, haha your good at that. :rocking:

[ikon]

nice...a dumbass im working with is running ceramic pads and wont listen to me...i cant wait til he cracks a rotor...so i can point and LOL and then toot my train horns while i drive away :D

[2LOW4ND]

nice...a dumbass im working with is running ceramic pads and wont listen to me...i cant wait til he cracks a rotor...so i can point and LOL and then toot my train horns while i drive away :D


Haha way to drive home your point! evertime he heres them im sure he is leaving in his truck and slams on his brakes haha.

[Inverter]

As am I haha. And yes i can tell. But being it is that close you are probably correct, they wont fit. But im thinking in the back of my head, i really want the bed on to really find out for sure so i can move on and just order the same size wheels im running in the front. Till this happens im going to be on pins and needles. :nopity: haha.
That sounds good but dont beat yourself up over it though.Worse things have been done by better people!:aniteef:

[2LOW4ND]

That sounds good but dont beat yourself up over it though.Worse things have been done by better people!:aniteef:


If worse does come to worse, i just run the same size im running up front. 17x9.5 and still keep the same look...

[3-UP]

You could get your axles re drilled and save the space from the adapters seeing that you have the clearance on the 4 link.

[tpichevy]

what did you pay for the new driled and slotted brakes? they look killer!!

[2LOW4ND]

3-UP thats a really good idea.

tpichevy - i bought them through summit, they were like $32 ea and came with pads.

[91blkstpsd]

tpichevy - i bought them through summit, they were like $32 ea and came with pads.


What! Thats cheaper than the regular ones I bought. Whats the part number or brand? Looks great!

[2LOW4ND]

What! Thats cheaper than the regular ones I bought. Whats the part number or brand? Looks great!


I would have to look.
You can go so summitracing.com to and search by the year of your truck etc.

[tpichevy]

so i cant find any on the web site for that cheap...closest i can find is 170$ for the combo. :dunno:

[2LOW4ND]

so i cant find any on the web site for that cheap...closest i can find is 170$ for the combo. :dunno:

Haha my bad they are 70ea.

Im buying lil murks 20" Centerline smoothies for now. Till i figure this vette wheel deal out.

[ikon]

its official im selling my wheels...everyone has em now

[Marcos]

its official im selling my wheels...everyone has em now

Yeah, but they only look good on certain vehicles, and yours are 22's!

[2LOW4ND]

Yeah, but they only look good on certain vehicles, and yours are 22's!
What are you trying to say, they will look like poop on my truck??

[Inverter]

2Low,,Lets see some more progress!chop chop!:charge:

[Marcos]

What are you trying to say, they will look like poop on my truck??

No, But if you are going for a sport truck look, smooties aren't the wheel to do it in, thats a classic style cruzing wheel... You need a wheel thats gonna chop chit up when driving down the road.

[2LOW4ND]

Nice bump Inveter!! I actually will have some major updates by the end of this week, i will keep ya posted. Kinda took a couple weeks of on the truck project. Now we are back on track.

Marcos, i was just kidding when i said they would look like poop. Ive seen them on a OBS Rcsb bagged and black, they looked killer. Im only running them this spring and early summer. My buddy already said he is going to by them from me and put them on his ole caddy he is bagging. Then im going to run a Boyd wheel Junkyard Dogs. Then mess around with the vette wheels this summer too, once the truck is on the ground.

[Marcos]

:cool:

[1lo98]

Nice build man!

[2LOW4ND]

Well its been a couple weeks, we took a couple weeks of on really working on the truck. Anyways back on the grind and the truck should be down by next weekend. Here are some pictures from a couple weeks i have and this week. The pictures of the makeshift wheels i bought from lil murk for now. 20" smoothies.. They were all anodized and i had one of my buddies take them to his work to polish them out.
So all in all a sloppy update, but its getting late and im tired.
major updates of airline the truck on the ground layed out finally.....

much more to come with in the next 10 days!

on to some random pictures!

new 2" drop spindles
crossdrilled/slotted rotors.
everything painted up and cleaned up ready to put back on the truck.
http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpicture006.jpg

http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpicture008.jpg

http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpicture007.jpg
came dirty as ****!!!!!
http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpicture005.jpg
One polished!
http://img.photobucket.com/albums/v303/91FULLSIZE/polishedwheel.jpg

[bizzybone485]

nice. They should be killer on there. What are you polishing those wheels with. i dont know what to get for the centerlines cause what i used for the eagles i had is now scratching the centerlines. Thanks

[Marcos]

nice. They should be killer on there. What are you polishing those wheels with. i dont know what to get for the centerlines cause what i used for the eagles i had is now scratching the centerlines. Thanks

This stuff for chrome.
http://us.st11.yimg.com/us.st.yimg.com/I/yhst-33883463985110_1987_139186
http://www.glimmerglassdetailing.com//chandhotenpo.html

This stuff for aluminum
http://us.st11.yimg.com/us.st.yimg.com/I/yhst-33883463985110_1987_64783
http://www.glimmerglassdetailing.com//mepore.html

[ikon]

Look for Blue Magic Metal Polish its the ****!!!

[Nickleahy23]

Well its been a couple weeks, we took a couple weeks of on really working on the truck. Anyways back on the grind and the truck should be down by next weekend. Here are some pictures from a couple weeks i have and this week. The pictures of the makeshift wheels i bought from lil murk for now. 20" smoothies.. They were all anodized and i had one of my buddies take them to his work to polish them out.
So all in all a sloppy update, but its getting late and im tired.
major updates of airline the truck on the ground layed out finally.....

much more to come with in the next 10 days!

on to some random pictures!

new 2" drop spindles
crossdrilled/slotted rotors.
everything painted up and cleaned up ready to put back on the truck.
http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpicture006.jpg

http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpicture008.jpg

http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpicture007.jpg
came dirty as ****!!!!!
http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpicture005.jpg
One polished!
http://img.photobucket.com/albums/v303/91FULLSIZE/polishedwheel.jpg


Lookin good man..Im doing this exact same thing in a few weeks. Did you get some new wheel bearings for those as well? My DJM spindles should be here this week and I need to order some new rotors as well..Those are exactly what I was thinkin. And advice on puttin them on? Ive never done rotors or bearings on my truck..just in auto class like 4 years ago

Also man I cant find any drilled/slotted rotors that are $70. Only ones I see are $89 and dont come with brake pads..Think you could throw down a link?

[2LOW4ND]

Lookin good man..Im doing this exact same thing in a few weeks. Did you get some new wheel bearings for those as well? My DJM spindles should be here this week and I need to order some new rotors as well..Those are exactly what I was thinkin. And advice on puttin them on? Ive never done rotors or bearings on my truck..just in auto class like 4 years ago

Also man I cant find any drilled/slotted rotors that are $70. Only ones I see are $89 and dont come with brake pads..Think you could throw down a link?


Everything is rebuilt and replaced, or repacked, new and fresh. My buddy did them for me at his work, there is one peice he needed new it was the seals for the hubs the cost like 10 bucks for both.
as for the slotted and cross drilled rotors,,, Summit racing has them for our trucks, cheap!

[Nickleahy23]

Everything is rebuilt and replaced, or repacked, new and fresh. My buddy did them for me at his work, there is one peice he needed new it was the seals for the hubs the cost like 10 bucks for both.
as for the slotted and cross drilled rotors,,, Summit racing has them for our trucks, cheap!


Alright thats what i figured....

On Summit the cheapest i could find was the $89 ones...

[Inverter]

2Low,Lookn good! Love the rotors!Cant waite 2 C it on the ground.OBS/RCSBeeauches FTMFW !!! :naughty:

[96thebossgrnchv]

lookin good man but wait, the truck is laid out and no pics!?? lol

[Inverter]

:biggrin:
http://i223.photobucket.com/albums/dd12/Inverter101/2008truckpicture007-1.jpg

[tpichevy]

yea i cant seem to find the brake parts on the summit site either...a link would help...or a part number off the box maybe? :naughty:

[Marcos]

yea i cant seem to find the brake parts on the summit site either...a link would help...or a part number off the box maybe? :naughty:
Right
SUM-DSEP-5594R
http://store.summitracing.com/partdetail.asp?autofilter=1&part=SUM%2DDSEP%2D5594R&N=700+4294922533+4294839009+4294859634+400304+4294908216+4294924760+4294908028+115&autoview=sku
Left
SUM-DSEP-5594L
http://store.summitracing.com/partdetail.asp?autofilter=1&part=SUM%2DDSEP%2D5594L&N=700+4294922533+4294839009+4294859634+400304+4294908216+4294924760+4294908028+115&autoview=sku

[Nickleahy23]

does it make a difference that those are 88-94? and I have a 95..whats the difference?

[DRAGGIN95]

Hello, the difference is that 95 up has 4 wheel ABS, 94 and down most don't even though it was an option, so the 95 up have a reluctor wheel for the abs sensor that is part of the rotor, I have seen them for 95 and up but a lot more money, you could use the ones listed above for 94 and down if you are eliminating your abs or don't care that it doesn't function.

[22tahoe]

This stuff for chrome.
http://us.st11.yimg.com/us.st.yimg.com/I/yhst-33883463985110_1987_139186
http://www.glimmerglassdetailing.com//chandhotenpo.html

This stuff for aluminum
http://us.st11.yimg.com/us.st.yimg.com/I/yhst-33883463985110_1987_64783
http://www.glimmerglassdetailing.com//mepore.html

I have used this stuff to re-polish my billet wheels and to me, it works better that the mothers billet polish.

[bizzybone485]

coo. Guess im gonna have to look around for that.
Keep up the good work 2low4nd. I wanna see this thing layed out on smoothies already. hahaha.

[TURBO V6]

We need pics of those wheels on there.

[2LOW4ND]

I hate the Y PIPE!!!!!! Im laying y pipe!!
Still alot of work to do, but its on the ground for the first time with bags, i have to clean up the other two wheels too.
on with some pictures
http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpicture015.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpicture017.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpicture021.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpicture022.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpicture023.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpicture024.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpicture026.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpicture028.jpg


my buddy kyle and cory helping with the truck..

http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpicture032.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpicture033.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpicture034.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpicture035.jpg



I HATE THIS LAYING Y PIPE!
http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpicture037.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpicture038.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpicture039.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpicture041.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpicture044.jpg

[ikon]

Y-pipe fix...ftw...most exhaust shops will do it for a really good price too.

http://i74.photobucket.com/albums/i267/secsi_ikon/Picture004.jpg
http://i74.photobucket.com/albums/i267/secsi_ikon/Picture002.jpg

[Inverter]

2Low it looks great .Did you mod everything under the hood to lay out?If not,I would chop that pipe off and do the rest of the modding needed,then clamp on some flex pipe and drive to a muffler shop.That way When you leave the muffler shop you can just do the shake down. Anyway,,Looks B/A!!!

[2LOW4ND]

2Low it looks great .Did you mod everything under the hood to lay out?If not,I would chop that pipe off and do the rest of the modding needed,then clamp on some flex pipe and drive to a muffler shop.That way When you leave the muffler shop you can just do the shake down. Anyway,,Looks B/A!!!

Thank you sir.
Everything is relocated under the hood so im good to go there.
Im just gonna take it to the muffler shop right away, but frist i need to find someone to slap on my chrome headers for me, i dont wanna deal with the headers.. I also have a full race summit racing muffler for the muffler shop to weld on also.
But as soon as i get the truck rolling the first place its going b4 it comes back to my garage is the muffler shop!

[3-UP]

Lookin good, I hope your keeping it black. Your not curious to see how the Vette wheels look under there. :dunno:

[2LOW4ND]

Lookin good, I hope your keeping it black. Your not curious to see how the Vette wheels look under there. :dunno:

Hell yes im keeping it black. I bought this truck from someone who had it in storage for the last 4 years! Its in brand new condition still, no dings dents etc..

I was talking to Marco about this in an earlier post, I will be bolting up the wheels and getting tires for the vette wheels once the truck is finished up and back in MY garage earlier this summer. So I will be messing around with a few different things, wheel and tire setups, the smoothies are temp..
Im amped up to mess around with it. :wink:

[ikon]

Hopin those vette wheels work out...simply because this = sex...

http://a500.ac-images.myspacecdn.com/images01/76/l_332a2e31f3c278c9447ab5a821dfd5e3.jpg

[2LOW4ND]

Hopin those vette wheels work out...simply because this = sex...

http://a500.ac-images.myspacecdn.com/images01/76/l_332a2e31f3c278c9447ab5a821dfd5e3.jpg

It is sexy also tubbed! lol.
yes that is pure sex!

[Inverter]

Thank you sir.
Everything is relocated under the hood so im good to go there.
Im just gonna take it to the muffler shop right away, but frist i need to find someone to slap on my chrome headers for me, i dont wanna deal with the headers.. I also have a full race summit racing muffler for the muffler shop to weld on also.
But as soon as i get the truck rolling the first place its going b4 it comes back to my garage is the muffler shop!
Awesome! So i guess its gonna be an open header run to the muff.shop? I love those trips and Chrome headers,no less... Youz uh Ballah!!:naughty:

[2LOW4ND]

Awesome! So i guess its gonna be an open header run to the muff.shop? I love those trips and Chrome headers,no less... Youz uh Ballah!!:naughty:


Yes balla chrome headers, let alone open headers bagged FULLSIZE rolling down the street! haha.. = sickness! haha.

[Inverter]

:devil: sickness !!!

[Pre-Game]

i was busy lately, just saw this thread looking very nice! me likey

[2LOW4ND]

Cut the y pipe off sunday, helped it lay down another inch or so.

Then i found out i had cut down my bag cups :/ got that takin care of today.

[2LOW4ND]

edit* I think alot of people lost interest on my project since i pushed my vette wheels off till late spring. :P

[tpichevy]

haha no sorry im back :charge: but im glad your still goin to try the vette wheels, if they dont workout for ya i might have to make them work for me :naughty:

trucks lookin sick by the way...keep the pics commin!! :bowtie:

[bizzybone485]

Yeah bro keep the pics coming i wanna see her all cleaned up! But yeah definately keep the idea of the vette wheels. I think im going the same route but different style.

[96thebossgrnchv]

damn that looks good man!

[BigBadBowtie572]

http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpicture021.jpg
I like this shot! :naughty: I like the buildup so far. The smoothies are nice but Vette wheels must go back on, not later, now.:D

[bizzybone485]

yeah dude get those vette wheels on there cause i need some guidlines. Im curious to how they will sit on there although your running bags and im not.

[2LOW4ND]

Oh yes i will be playing around with the VETTE wheels.

Well ended up cutting the lower cups, no see how hard it lays in the front now too!!!!!

****ty cell phone picture, didnt have my camera with.

http://img.photobucket.com/albums/v303/91FULLSIZE/0228081940.jpg

[2LOW4ND]

The bags will be finished up and the truck will be rolling on the ground and finished sat!

http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpicture047.jpg

http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpicture048.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpicture049.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpicture050.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpicture051.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpicture052.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpicture053.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpicture056.jpg

[Nickleahy23]

clean man..real clean..On a side note, how are those drilled and slotted rotors? Everyone is telling me to stay away from them because they can crack? I dont know how true that is and im sure you havent gotten to use them but ya..keep up the good work

[ikon]

Ive seen ceramic pads make them crack but regular pads you should be fine.

[2LOW4ND]

I installed them during the bag instll so they havent been used yet. They come with there own pads too.

[bizzybone485]

What kind of pads do they come with. I just went with powerslot's rotors and hawk pads cause a lot of people were talking a lot of them and didnt really hear anything bad about them. Amazing setup! Thats really all i have to say about them. The only thing that im worried about is the the pulling to the left and im not sure if i should blame it on the swap or because of alignment being done, rims being put on or what. It almost seems as if it floats when im braking hard so i dont feel that its from the brakes. Otherwise awesome setup. I even went with the Russell lines from summit and they were nothing to install. I highly recommend them. I love the braking and i still havent dont the rear. Those will give me a little stronger pressure so wewll see what happens. Although i did do the rears as well so im ridin new brakes all the way around. Those yellow lights have been catching me lately and ive had no problem stopping. Hope that helps a little bit.

Anyways, enough rambling on your post bro...haha. Looks good. I calculated that those wheels should fit on there bro. 11 inches in the rear is about the biggest you can put back there but the should fit. Although it seems as if you have 12 inches wide according to the pics of the wheels? anyways! i think the boyd coddingtons would look sick bro! are you going with 20s?

[Marcos]

Looks good, but don't the compressor's get restricted by teeing them together? And it looks like you might have to much threads showing on your bars but I can't tell, just want to make sure you don't mess you sweet ride up...

[Inverter]

Hey 2,,You been gettin stuff done.Looks B/A!!You gonna get the bed on Sat.too? Take some photos for my Sunday morn. coffee!

[2LOW4ND]

Looks good, but don't the compressor's get restricted by teeing them together? And it looks like you might have to much threads showing on your bars but I can't tell, just want to make sure you don't mess you sweet ride up...

Everything was set we kinda took everything back apart. You see where the threads are painted thats where they are set.
The compressors situation, im really not sure of, I have never really heard of that. I guess.

[2LOW4ND]

Hey 2,,You been gettin stuff done.Looks B/A!!You gonna get the bed on Sat.too? Take some photos for my Sunday morn. coffee!


Yes sir the bed will be on with a notch cover that folds open so i can access everything.

The exhaust isnt going to be done though, nor the line x im going to have done to the bed, till a month or so.

[Marcos]

Cool, just making sure.

[ikon]

I cant wait to see this thing done *skeet* *skeet*

[2LOW4ND]

teaser dark out ****ty cell phone picture.

I have better pictures ill just post this one though.

:P haha.

http://img.photobucket.com/albums/v303/91FULLSIZE/0307081913.jpg

[96thebossgrnchv]

looks sweet! i think i could kinda see the bed on it lol

[2LOW4ND]

http://img.photobucket.com/albums/v303/91FULLSIZE/0307081920c.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/0307081920a.jpg

[ikon]

damn sexy man!! Did those wheels not come with centercaps?

[2LOW4ND]

damn sexy man!! Did those wheels not come with centercaps?


Thank you sir!

I just got the centercaps today.

[framedraggin96]

truck is lookin good layed out, nice work.

[tpichevy]

**** yea man that looks great!! now i wonder why can photshop the zr1 wheeels in there lol!! :naughty: :colby04:

[BagginA93chev]

that looks badass layed out on them smoothies man good job, i love layed out obs trucks.

[2LOW4ND]

http://img.photobucket.com/albums/v303/91FULLSIZE/th_0308081614.jpg (http://smg.photobucket.com/albums/v303/91FULLSIZE/?action=view&current=0308081614.flv)

http://img.photobucket.com/albums/v303/91FULLSIZE/th_0308081800.jpg (http://smg.photobucket.com/albums/v303/91FULLSIZE/?action=view&current=0308081800.flv)

[Marcos]

Looks good. Did you do front shocks?

[2LOW4ND]

Looks good. Did you do front shocks?


I havent yet, im sure if i really need them.

[2LOW4ND]

Just getting some finishing touches done tonight!

She is ready to come home into her own garage at my house tomorrow!

http://img.photobucket.com/albums/v303/91FULLSIZE/0308081552.jpg

[Nickleahy23]

so hows it feel? i couldnt get the smile off my face right after i bagged mine..I bet its just a solid hardon lol

[Inverter]

Congratz on the air ride install.You knocked it out quick. Nice clean job and a clean obs.Now what u gonna do,,besides dragg it.? Any shows?

[2LOW4ND]

The official 2low4nd High Quality picture thread!

http://www.fullsizechevy.com/forums/image-gallery/snapshots-videos/314356-official-2low4nd-hi-quality-picture-thread-tons-pictures.html

[2LOW4ND]

Still need to get my painted smoothie front bumper on.


The truck needs a good wash and a good buff job, but here it is fresh out of the shop.


http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpictures001.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpictures002.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpictures003.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpictures004.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpictures005.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpictures006.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpictures007.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpictures008.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpictures009.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpictures011.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpictures012.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpictures013.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpictures014.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpictures015.jpg


This was a dude with a lifted ford that was at the gas station drove by and wanted to park next me and take his own pictures haha. Kinda funny. He like the truck.

http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpictures016.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpictures018.jpg


Met up with one of my friend steve with his bagged ford on 22s.

http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpictures019.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpictures020.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpictures021.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpictures019.jpg

[2LOW4ND]

http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpictures020.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpictures021.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpictures022.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpictures024.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpictures025.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpictures026.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpictures028.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpictures029.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpictures030.jpg


http://img.photobucket.com/albums/v303/91FULLSIZE/2008truckpictures033.jpg

[bizzybone485]

Why is it that you keep building trucks that i would die to have? hahaha. I love the way that it came out.

[elsurfo10]

man thats so sick looking

[Nickleahy23]

why you sellin the bagged one?

[Chevyforlife502]

I turned out great. YA but y selling it

[91blkstpsd]

why you sellin the bagged one?
It turned out great. YA but y selling it

x3

[2LOW4ND]

I just dont like rolling a bagged truck and driving it everyday.

[96extcab]

I just dont like rolling a bagged truck and driving it everyday.

I thought the other truck was the daily driver?

[bizzybone485]

yeah dude i would gladly take that truck off your hands if i had the money. I would definately keep it and work with it. Too nice of a truck to let go imo.

[whiteknight88]

i love reading your build up of this truck. im actually going to use it as a guideline on doing my truck considering its pretty much the same. what exactly did u do for baggin the front end? i noticed to used 2" drop spindles. did u just weld on cups on the stock arms or did u use aftermarket ones? also if it wouldnt be to much trouble could u post pictures of it? thank

[2LOW4ND]

Thanks guys,

[eulogio]

Came out great.I love those wheels,just because they dont have fancy designs.

[2LOW4ND]

DEBAGGIN. PRO STREET SOON, NOT FOR SALE.

All bagged parts are for sale in the for sale section.

How come i didnt think of this earlier? Debagging the truck. Im running cups and bags up front. That i can replace with coils and drop spindles. The rear is notch well it doesnt matter anyways, if im looking for a tubbed truck or going to tubb a truck. I im going to be running a coilover mounted on the axle anyways, so i dont need to deal with spring perches that were cut off. I just need to run a race 4 link with the coilovers. All I need to do is put the truck on jackstands, and start selling all the bagged stuff, and put the front back to static. And can take all the time in the world to tub the rear and install the new race 4 link along with the coilovers and narrowed rearend. Truck is no longer for sale. But all my 5 month old bagged parts are. Ive put 1000 miles on the truck since it has been bagged so these are new parts. My truck is too clean to give up on it now.

[WetPaintYukon]

Best idea youve had all day huh?? :lol:

That truck is too clean, I can believe you got rid of any of your obs trucks.

[2LOW4ND]

Best idea youve had all day huh?? :lol:

That truck is too clean, I can believe you got rid of any of your obs trucks.


This truck is rediculous. It the clean of the clean. I cant beleave, i didnt think of this earlier. About getting rid of any of my obs trucks, i know.

This one is my baby, as for it being build into a prostreet, i cant beleave, its so easy to swap back over to a static drop a build a drag truck. Im working with my baby.

[91blkstpsd]

Sounds good, glad to hear its not leaving. What kind of ides you throwing around for an driveline?

[tpichevy]

This forum needs a good step by step LSX swap for an OBS so my vote is a ls7 swap :rocking: :daddy:

[Rob7]

wow ur truck is so sick...
thats my dream truck black, on air, w/ smoothies!

[2LOW4ND]

Guys stop posting in this thread.


Post here.


http://www.fullsizechevy.com/forums/general-discussion/projects-builds-restorations/343802-2low4nd-here-we-go-again.html