york serpentine clutch?

[99gixxer]

what make, model, year vehicle had a York with a serpentine clutch. i want to go get one from autozone so i can start building the brackets for my edc. i know you can get them from a few places for around $120, but i have a bunch of autozone gift cards, the clutches there are a little cheaper & im a cheap a$$. thanks

[DRAGGIN95]

Hello, the best luck I have had with a serp. 210 clutch at a parts store is to tell them it is for a semi truck air conditioner with the 6 rib clutch, a lot of them have the 8 rib clutch, sorry I don't have a model number.

[99gixxer]

too bad you dont have any specifics, but thanks for the input. anyone else know of anything?

[dave89iroc]

you can run the 8 rib clutch if needed, just make sure 6 of the ribs are lined up with you pulleys, and that the belt is on those ribs

[99gixxer]

i ran across this on a 4x4 forum. cheaper than the kilby clutch.
http://www.ryderfleetproducts.com/cgi-bin/ryderfp/products/srm/oid/47299/erm/product_detail.jsp

i guess thats all ill find, ive searched but no luck on any at a local prats store.

[DRAGGIN95]

Thats a good find, my favorite parts store is the old time type where the guy behind the parts counter still knows what he's talking about, he found what I need in one of his semi parts books, maybe it is different in other places but here it is hard to find anyone at a parts store who knows anything but maybe their name.

[bodydropped88]

I got this off ebay. I don't remember what I got mine off of but I did get it from the parts store for like $120.
http://cgi.ebay.com/ebaymotors/Kilby-York-On-Board-Air-Compressor-Serpentine-Clutch_W0QQcmdZViewItemQQcategoryZ33650QQihZ003QQitemZ130093794694QQrdZ1QQsspagenameZWD1VQQtrksidZp1638Q2em118Q2el1247. until then i'll try to see if i kept the old clutch box with the p/n on it

[96thebossgrnchv]

what make, model, year vehicle had a York with a serpentine clutch. i want to go get one from autozone so i can start building the brackets for my edc. i know you can get them from a few places for around $120, but i have a bunch of autozone gift cards, the clutches there are a little cheaper & im a cheap a$$. thanks
your clutch is shot? why serpentine?

[99gixxer]

your clutch is shot? why serpentine?
ive been thinkin about gettin it rigged up keeping the v-belt, but a few things changed my mind. id have to get that special alt. pulley for $60, then build a bracket with a tensioner, & that big balancer on the clutch is ugly, heavy & will probly rob a few more hp. going serpentine i can build a solid mount & the existing serp tensioner will eliminate the need for another, ill just have to get a longer belt. if anything happens to the edc ill keep a factory belt behind the back seat.

[96thebossgrnchv]

ive been thinkin about gettin it rigged up keeping the v-belt, but a few things changed my mind. id have to get that special alt. pulley for $60, then build a bracket with a tensioner, & that big balancer on the clutch is ugly, heavy & will probly rob a few more hp. going serpentine i can build a solid mount & the existing serp tensioner will eliminate the need for another, ill just have to get a longer belt. if anything happens to the edc ill keep a factory belt behind the back seat.
oh ic, cool

[Bagged 04]

Here is the clutches. Link! (http://www.gravity-werx.com/index.asp?PageAction=VIEWCATS&Category=98)

[Marcos]

I got this off ebay. I don't remember what I got mine off of but I did get it from the parts store for like $120.
http://cgi.ebay.com/ebaymotors/Kilby-York-On-Board-Air-Compressor-Serpentine-Clutch_W0QQcmdZViewItemQQcategoryZ33650QQihZ003QQitemZ130093794694QQrdZ1QQsspagenameZWD1VQQtrksidZp1638Q2em118Q2el1247. until then i'll try to see if i kept the old clutch box with the p/n on it

Whats the p/n?

[99gixxer]

Here is the clutches. Link! (http://www.gravity-werx.com/index.asp?PageAction=VIEWCATS&Category=98)
i knew about those. i was trying to find one at a local parts store because i can get a perdy good discount. i did run across the one for $70, which is half the cost of the one from gravity-werx. but thanks for the help.

[03bootie]

anyone kno if this kit would work for my 03 silverado with the 4.3 in it....this is from bagged 04's link
EDC Mounting Bracket 96-03 S-10 4.3L V-6

also is this http://www.gravity-werx.com/index.asp?PageAction=VIEWPROD&ProdID=119
the clutch u use for any york to ad to just a serp setup with no vbelt?

[Bagged 04]

I think that is the kit sd.com sells you when you tell them you have the 4.3, call and ask either sd.com or g-w.com will do what they can to help and not steer you wrong.

[03bootie]

So U Think It Will Fit Then??

[Marcos]

So U Think It Will Fit Then??
I think that is the kit sd.com sells you when you tell them you have the 4.3, call and ask either sd.com or g-w.com will do what they can to help and not steer you wrong.

Your gonna have to call, I know some people that used that kiton a NBS with some modifications.

[03bootie]

U Kno Of Anyone On Here That Mod'd It To Fit Marcos??

[03bootie]

Also Is Everyone Runnin The York Sc209? Is This The Compressor That Fits The Bracket Kits They Sell? What Car Can U Get This Exact Model Off Of?

[Marcos]

For the 209 you have to get it off of;
Audi
1980 - 1983 4000
1985 4000S QUATTRO
1986 - 1987 4000CS QUATTRO
1985 QUATTRO
1984 - 1987 4000S

And Silverado2nv modded his, but for the York 210

[03bootie]

Whats The Most Popular Model People Are Using?

[03bootie]

I Wana Put It In The Stock Ac Location Since I Dont Have Ac...i Just Noticed That The S10 Kit Is Probably The One That Goes On The Side Of The Alt Am I Right?

[Marcos]

I searched for about 2 hours looking for the p/n for a serpentine clutch for the 210 and found nothing, anyone get one yet?

[Bagged 04]

For some reaosn i want to say i read once it used the same clutch.

[03bootie]

So What Comp Is Better To Use? And Anyone Actually Mount It In The Stock Ac Location On A 4.3?

[Marcos]

For some reaosn i want to say i read once it used the same clutch.

I dont think so... I think the 209 has a tapered shaft and the 210 doesn't.

[Bagged 04]

I know the 209 has a tappered shaft, but ive never seen a 210 in person. Maybe they are different.

[RaiN]

Dammit, I wonder if I can sell someone the Vbelt clutch off my york? I think I'm going to run a bigger belt too.

[99gixxer]

I searched for about 2 hours looking for the p/n for a serpentine clutch for the 210 and found nothing, anyone get one yet?
this is the one i found for a 210. i can say for sure if it fits in a week or two.
http://www.ryderfleetproducts.com/cgi-bin/ryderfp/products/srm/oid/47299/erm/product_detail.jsp


ill look at my 210 tom. & see about the shaft.

[Marcos]

Well I seen some pics and both compressors have tapered shafts.

[03bootie]

Can Someone Explain To Me How The Wiring Works On Edc's? Do U Just Hook Up The Clutch To The Pressure Switch Somehow And The Cluth Kicks On When Ur Tank Goes Under The Specified Pressure? Hows The Wiring Look?

[Bagged 04]

Exacly what you said. You pull power off a switched source thats only on when the truck is on. Run that to one side of the pressure switch. From the other side fo the switch it goes to the clutch. And does just what you said.

With the airlift kit the suggest installing the pressure switch/blow off valves at the end of the supplier leader hose to simplify wiring. But i have all that at the rear of my truck which does make for longer wire runs.

[03bootie]

will this kit work with my 03 silv with the 4.3? its the same motor and it has more room in the engine bay then a s-10 i dont see y it wouldnt work.
http://www.suicidedoors.com/96-03S10V6.php#