Custom Lights

[Custom1]

We sell a few different lengths and colors of LED's, and can build any custom light design....

We sell LED's in bulk as well.

Ask us what you will.........

Michael
aka Custom1:dunce:

[groundscraper5]

Just curious, how bright are the LED's you provide?
Also, I'm curious how much a tailgate with two 14" Led's would cost me. Smoothed out, prepped and primered.

[Custom1]

I have sent a PM with the prices...
Our 14" LED's are D@mn bright!
3000+ Lumens per LED and 50...that's what I said...50 LED's per light!:devil:

[Loki]

um...mike shoot me a pm about the price for the same thing, i'm interested in the led's under the body line same size and same amount w/ paint though as well, and how long it would take....

[groundscraper5]

Mike,
I've decided I want to mold in some of your LED's to my current roll pan. Will these fit flush (or can be made) with the body with the buckets provided? How deep are the buckets you provide for the 14" stop light LEDs?

Thanks,
Albert.

[Custom1]

No, the buckets will not "flush mount" the lights. The buckets french the lights.
http://www.customclassic.com/images/panpics/88-98frenched14angle.jpg

This is an example we did for a guy in Arkansas.....

Frenched basically means recessed.

The boxes are 16 gauge steel and measure 14 1/8 X 1"X 1 1/2" deep

Custom1:D

[groundscraper5]

Mike,
I read on your website that you are selling flush mount LED's. Let me know if this is true because I want to get one for my 3rd brake light very soon....

Thanks,
Albert

[dixon]

Originally posted by groundscraper5
Mike,
I read on your website that you are selling flush mount LED's. Let me know if this is true because I want to get one for my 3rd brake light very soon....

Thanks,
Albert



I want price also, for same thing.

[Jugrnut350]

I'm interested in getting a 30" LED in my tailgate prepped and smoothed like the others... Would I need to get 2 pigtails or just one? I also want a 10" single circuit strip to go at the top of the cab as a 3rd brakelight.

Thanks,

-Tim-

[dapolice1]

Micheal,
I emailed you a few times. I need to know what I owe you for the parts you shipped me. I want to pay you so let me know....I also posted under your install thread a question... How are the suicide hood hinges coming along???

[jabtay]

I would like to get 2 14" with brake, parking, and signal, and a 10" for a third brake light. Also how about when an LED burns out, are they replaceable? HOw much would all of this be shipped to 33615. Well might as well quote a rollpan with right side box, tail light fillers, and a billet license plate frame with light.

[Custom1]

I would like to get 2 14" with brake, parking, and signal, and a 10" for a third brake light. Also how about when an LED burns out, are they replaceable? HOw much would all of this be shipped to 33615. Well might as well quote a rollpan with right side box, tail light fillers, and a billet license plate frame with light.


Give me a call....not that I don't want to list the prices...but I might have a couple of options for you as a complete "package"

Michael
800-3654-6928

[Domeskilla]

I would like to get 2 14" with brake, parking, and signal, and a 10" for a third brake light. Also how about when an LED burns out, are they replaceable? HOw much would all of this be shipped to 33615. Well might as well quote a rollpan with right side box, tail light fillers, and a billet license plate frame with light.

i hope im' not stepping out posting in reply in a vendors area. But def have mike get ya a tag light that fits int he hole in the pans he sells. a customer brought me one and its unbelieveably bright. a lot better then a billet ring light.

here is a link to a pic of what it looks like lit up

http://ultimatesporttruck.com/v-web/gallery/albums/bobby/tag_light_lit_up.jpg

that is the pan's that CC sells with the tag on the left.

[addiction2bass]

intersted in changing my LED bars into my tailgate up high. are your new leds any beter than what ya had a year or so ago when i bought mine?

not sure if i should keep em offsided or stretch them out in one long strip... tho these would look kinda stupid because thierd have to be a gap between each of them if end to end.
you got any ideas?

http://i40.photobucket.com/albums/e250/addiction2bass/BEST%20My%20truck%201995%20C1500%20ECSB/newtruckpictures009.jpg
thats what i got right now.

[audiomecanix]

whats the price on the installation of the led caddy lights w/amber on a 1995 chevy obs ecsb. basically welding,priming and prep install.

[Beau Burnett]

I have a question I've thought about for some time, but never asked. Here goes:

Does anyone make metal, bolt in replacement tailight blanks for an OBS? These would be bent just like the stock lights. If they could be bolted in, in the place of the stock units, one would be able to add a variety of custom light treatments with some drilling and fab, but at minimal cost. I've only seen the weld-in buckets used most frequently when Caddy lights are added.

[lowryder99]

I have a question I've thought about for some time, but never asked. Here goes:

Does anyone make metal, bolt in replacement tailight blanks for an OBS? These would be bent just like the stock lights. If they could be bolted in, in the place of the stock units, one would be able to add a variety of custom light treatments with some drilling and fab, but at minimal cost. I've only seen the weld-in buckets used most frequently when Caddy lights are added.
No one sells those but if you want that effect you might as well have your tailights painted to the body color like the pics posted above, it would be the same thing as the steel bolt in you propose :ehcapt:

[addiction2bass]

dito.....
if ya want the option to put the truck back stock just buy some old scratched up lenses sand em smooth and paint them to match your truck... thats preaty much what i did to my truck ;)
looks alright....
and cheap...

[Beau Burnett]

Almost. I was thinking of putting some small leds or some other type of stop/turn lights in the bolt in panel, so I doin't think painting the stockers would work well for that.

[addiction2bass]

why not just some taillight covers than.....

i like the caddy style covers myself! if i didnt have myrollpan with led bars id definatly get them! you can always cut away at the back of the housing and put your own led lights into the rear of the lenses.

ive seen several different ways to do it.... a full custom led plate or just a simple adding a extra bulb to the top part of the housing like it shoulda been from factory ;)
just buy a spare set of tails and experiment ;)

[chadcmb]

No, the buckets will not "flush mount" the lights. The buckets french the lights.
http://www.customclassic.com/images/panpics/88-98frenched14angle.jpg

This is an example we did for a guy in Arkansas.....

Frenched basically means recessed.

The boxes are 16 gauge steel and measure 14 1/8 X 1"X 1 1/2" deep

Custom1:D



how much for this rollpan exactally with lights and steal preped and primered. also shiping to 99577.

[bignick31985]

I've been tossing around the idea of shaving the lights. Already have the pan with LEDs in there, but I dont know if the colormatched taillight blackouts are what I want.

How good is the fitment of you steel fillers? I understand some trimming is probably required, but you've got a killer price on them.

[Robbin'thabanks]

Can you make a 60" led bar full functional with reverse lights? Would the red leds go along the whole thing or just where the reverse leds arnt?

Im looking to get one to shave my taillights and put it under my tailgate or recess it into it. I might need a shorter one for recessing it in the tailgate since its not 60" wide i dont think.

thanks

[Custom1]

Can you make a 60" led bar full functional with reverse lights? Would the red leds go along the whole thing or just where the reverse leds arnt?

Im looking to get one to shave my taillights and put it under my tailgate or recess it into it. I might need a shorter one for recessing it in the tailgate since its not 60" wide i dont think.

thanks
except where the white aren't......largest for the tailgate is 56 inches

Give me a call and I will figure it with all discounts ands stuff

Michael
aka Custom1
800-365-6928