rollpan

[denny]

ok i was looking at your rollpans on your site i saw that a rollpan with lic plate is 107 then 160 for the LEDS. now what i want to know is are the LEDs installed and ready for primer or do you have to do some prep work

im looking for it to be delivered then be ready for primer then paint

[Custom1]

If you want the pan ready to prime, just add $10 The only thing that needs to be done is a little pooky on the stud welds on the front and the edges where the holes are cut.

For the $10, we will do the pooky work and spot prime the areas.

Custom1:dunce:

[denny]

so for like 280 the pan will be perfect and ready for the booth

sweet

[Custom1]

make sure you check it before you paint it....shipping dings....
but , yes, ready for the booth.
Custom1:dunce:

[denny]

sorry for all the questions...

how are the LEDs mounted, like are they flush with the pan or do they stick out?
cause i want them to be flush so that it is just smooth

[Custom1]

No prob.....questions are what this pv area is all about!
The LED's are not flush. They are mounted by bolts to the backside of the pan. The lens then presses against the pan and you see the lens through the slots. These are semi-flush. The only difference is the thickness of the steel.
Custom1:dunce:

[454ss]

Originally posted by denny
sorry for all the questions...

how are the LEDs mounted, like are they flush with the pan or do they stick out?
cause i want them to be flush so that it is just smooth Here's the pan with the slots for the leds so you get the idea how they look.
http://www.454ss.com/hosts/web/members/bugsy/92%20rollpan.jpg

[denny]

oo ok i get it now what would have to be done to get them flush because i really wanted to paint over them and then clear them so you dont even know that they are there until they light yup

thanks again for all the help
denny