My Katzkin

[quiksilverz71]

Here is my before and after pic's. It took me and a friend about 5hrs to install the kit. It fit real good, need to go back get some of the wrinkles out. It was getting late so we didn't get a chance too or put the door panels in.
http://www.imagestation.com/picture/sraid67/pf6a2e73329ddca22d5f157d068b074bc/fbcdfc6b.jpg

http://www.imagestation.com/picture/sraid67/p1b2f3b5ca9a8fcf4b40d8f3db29bdfc2/fbcdfc6f.jpg

http://www.imagestation.com/picture/sraid67/pa89b353ff520f6e51e8d6fd235b7942a/fbcdfc75.jpg

[Sevenfold]

Looks great... what colors did you go with? :rocking:

Here is mine... getting installed July 10

http://members.aol.com/bobsacamanto11/katzkin.jpg

[Bad Ash]

quiksilverz, those :rocking: !!! I'm really thinking about putting a set like that in my truck... in fact.. blackSierra, July 10th is my birthday.. you aren't by chance installing those in MY truck, are you? :read: :D

[quiksilverz71]

I have graphite with dove gray inserts. I like those colors! you should try and do the install yourself, it wasn't very hard. I called a shop around here and they wanted about $500 to do it. Thanks MrFleming007 :D

[454ss]

Looks real nice...:rocking:

[LOW98GMC]

looks bad@$$ :rocking: :rocking: def makes the interior look muck cleaner.....Trey:D

[CKTA]

WOW! Those look great!:cool:

[97OKCZ71]

It looks like you hog-ringed that thing too tight threw the inserts and the side panels look like they might have been cut a bit too far up so it is pulling the leather down and causing all the wrinkles. You did pick some sweet colors though. Very nice. You will probably end up having to do the front buckets over again to get those wrinkles out. The back bench looks like it has a "normal" amount of wrinkling in it and if you will let it sit in the sun and just got used a little it will start to fit a lot better.

Jeremy

[quiksilverz71]

Originally posted by 97OKCZ71
It looks like you hog-ringed that thing too tight threw the inserts and the side panels look like they might have been cut a bit too far up so it is pulling the leather down and causing all the wrinkles. You did pick some sweet colors though. Very nice. You will probably end up having to do the front buckets over again to get those wrinkles out. The back bench looks like it has a "normal" amount of wrinkling in it and if you will let it sit in the sun and just got used a little it will start to fit a lot better.

Jeremy

Thanks, but I didn't use any hog rings. It all snapped in place, but ya I do need to go over it again to get the wrinkles out. It looks alittle better now that I had them on for awhile. It was getting late so we kinda rush the front seats alittle. :cool:

[Big Angry]

Looks great! Wish they'd make a fu(kin' set to fit mine, so I could have been showing my new interior now.:cussing: :cussing: :cussing:

[ibthumpin]

Originally posted by Tahoe99LT
Looks great! Wish they'd make a fu(kin' set to fit mine, so I could have been showing my new interior now.:cussing: :cussing: :cussing:
maybe you should just wrap them in towels..... that way they would match your head :read: :LOL:

[97OKCZ71]

Oh yeah... ok sorry about the hog-rings thing. heh I forgot the new ones went to velcro down. POOOOP!! It basically means its nasty hard to get a great fit unless you have done a ton of them before, but its not impossible. By the way...

Tahoe99LT...
I should have the pattern for your truck if you wanted to get a custom set done. Lemme know if you want any more info...

Jeremy

[Big Angry]

Originally posted by 97OKCZ71


Tahoe99LT...
I should have the pattern for your truck if you wanted to get a custom set done. Lemme know if you want any more info...

Jeremy

Get me the info, like basically, how much? And where did you get the pattern now? Etc, etc, hit me up with a PM.

[Litljay]

Tahoe99lt - sorry I'm late to the show, but what are you referring to? Katzkin makes leathers for our hoes. Or did you have a specific design you were wanting?