06-06-2009, 08:19 PM
|
#1
|
|
Supporting Member
Join Date: Apr 2008
Location: was Ohio, now Washington
Age: 26
Posts: 1,064
|
Ring & Pinions, front diff, axle shafts
Quote:
Originally Posted by rstoner1026
I have several ring & pinions:
5.13s New Yukons for a 14SF. Installed, but rearend never installed in truck.
4.10s For a 14SF
4.56s For a 8.6" 10 bolt rear found in 99+ 1/2 tons
3.21s For a 14FF
3.54s For a HP Dana 60
Entire front differential with 4.56s. Fits 88-06. Works great.
Spare 8 lug axle shafts for 4x4 14SF
Skyjacker dual steering stablizer kit for IFS. (I had it on my 99)
Stock 77.5-79 HP dana 60 hub lockouts (ford)
post or pm if interested in anything. |
Originally posted in wrong location
Forgot to mention that I also have a pair of cvs from an 04 duramax
JUST FOR YOU ANTMAN: SEE POST 16
Quote:
Originally Posted by rstoner1026
Another note for everyone. I had a ProComp lift which required 1 mounting tab to be removed so ProComp's mounting tab could be mounted via the bolts that hold the 2 case halves together.
|
__________________
UNDER CONSTRUCTION click here 99 GMC RCLB ~19" Dana 60 & 14FF Detroit 5.38s GM HotCam Tom Woods Driveshafts PSC Steering Mazzi 20x12s Bilstein 7100s 36 MTZs(44" Pitbulls soon)
04 GMC Z71 ECSB
Last edited by rstoner1026; 08-13-2009 at 02:13 PM.
|
|
|
|
06-06-2009, 10:22 PM
|
#2
|
|
Registered User
Join Date: Dec 2002
Location: Baton Rouge
Age: 30
Posts: 324
|
Re: Ring & Pinions, front diff, axle shafts
How much for the front diff with 4.56? Is it for 1500 trucks? Also how much for the 4.56 gears for the 8.6 10 bolt? Shipped to 70726.
__________________
06 Silverado CC 5.3 White Z71
2" Body Lift/ Leveling Kit
|
|
|
|
|
06-07-2009, 01:11 AM
|
#3
|
|
Supporting Member
Join Date: Apr 2008
Location: was Ohio, now Washington
Age: 26
Posts: 1,064
|
Re: Ring & Pinions, front diff, axle shafts
Quote:
Originally Posted by clean327
How much for the front diff with 4.56? Is it for 1500 trucks? Also how much for the 4.56 gears for the 8.6 10 bolt? Shipped to 70726.
|
Yeah it for 1500s
UPS ground is around $100 from 98045 to 70726
$300 for front diff and $100 for 8.6 4.56s
$400 + shipping ~$500
Front is ready to go. The rear are still in the truck, so might be a week or 2 until I can ship those (need to get the 14 finished)
__________________
UNDER CONSTRUCTION click here 99 GMC RCLB ~19" Dana 60 & 14FF Detroit 5.38s GM HotCam Tom Woods Driveshafts PSC Steering Mazzi 20x12s Bilstein 7100s 36 MTZs(44" Pitbulls soon)
04 GMC Z71 ECSB
Last edited by rstoner1026; 06-07-2009 at 01:19 AM.
|
|
|
|
|
06-07-2009, 08:38 PM
|
#4
|
|
Never Finished
Join Date: Jul 2007
Location: Virginia
Age: 24
Posts: 458
|
Re: Ring & Pinions, front diff, axle shafts
the front diff wouldn't happen to be an autotrac would it?
__________________
2004 Z71 5.3 Blackbear Tuned, Pacesetter LT's,
Vette servo, ford keys,17x9 Moto Metal 951 black, 33's, E-Fans, 2500 springs, 14 bolt SF, Truetrac, 4.56
|
|
|
|
|
06-07-2009, 11:45 PM
|
#5
|
|
Supporting Member
Join Date: Apr 2008
Location: was Ohio, now Washington
Age: 26
Posts: 1,064
|
Re: Ring & Pinions, front diff, axle shafts
autotrac is the transfer case... the front diff is the same from 88-06.
__________________
UNDER CONSTRUCTION click here 99 GMC RCLB ~19" Dana 60 & 14FF Detroit 5.38s GM HotCam Tom Woods Driveshafts PSC Steering Mazzi 20x12s Bilstein 7100s 36 MTZs(44" Pitbulls soon)
04 GMC Z71 ECSB
|
|
|
|
|
06-07-2009, 11:49 PM
|
#6
|
|
Supporting Member
Join Date: Apr 2008
Location: was Ohio, now Washington
Age: 26
Posts: 1,064
|
Re: Ring & Pinions, front diff, axle shafts
All parts should be in this week for the 14FF, so if anyone is serious, I will pull the 10 bolt out. Just trying to keep the truck driveable until my ready to "pull the pin" on the SAS.
__________________
UNDER CONSTRUCTION click here 99 GMC RCLB ~19" Dana 60 & 14FF Detroit 5.38s GM HotCam Tom Woods Driveshafts PSC Steering Mazzi 20x12s Bilstein 7100s 36 MTZs(44" Pitbulls soon)
04 GMC Z71 ECSB
|
|
|
|
|
06-08-2009, 05:17 AM
|
#7
|
|
Never Finished
Join Date: Jul 2007
Location: Virginia
Age: 24
Posts: 458
|
Re: Ring & Pinions, front diff, axle shafts
Quote:
Originally Posted by rstoner1026
autotrac is the transfer case... the front diff is the same from 88-06.
|
Yea I was not thinking to fast on that one. How many miles on the gears?
__________________
2004 Z71 5.3 Blackbear Tuned, Pacesetter LT's,
Vette servo, ford keys,17x9 Moto Metal 951 black, 33's, E-Fans, 2500 springs, 14 bolt SF, Truetrac, 4.56
|
|
|
|
|
06-08-2009, 07:44 AM
|
#8
|
|
Supporting Member
Join Date: Apr 2008
Location: was Ohio, now Washington
Age: 26
Posts: 1,064
|
Re: Ring & Pinions, front diff, axle shafts
I've put about 10000 on the truck. With the front actuator, the front gears don't turn unless its in 4x4. The gears have less than 200 miles on the them. Didn't need 4x4 to much with the MTZs. The gears have been in 2 years and the truck is not my DD.
__________________
UNDER CONSTRUCTION click here 99 GMC RCLB ~19" Dana 60 & 14FF Detroit 5.38s GM HotCam Tom Woods Driveshafts PSC Steering Mazzi 20x12s Bilstein 7100s 36 MTZs(44" Pitbulls soon)
04 GMC Z71 ECSB
|
|
|
|
|
06-08-2009, 06:35 PM
|
#9
|
|
Never Finished
Join Date: Jul 2007
Location: Virginia
Age: 24
Posts: 458
|
Re: Ring & Pinions, front diff, axle shafts
can you get me a shipping quote to 23608?
__________________
2004 Z71 5.3 Blackbear Tuned, Pacesetter LT's,
Vette servo, ford keys,17x9 Moto Metal 951 black, 33's, E-Fans, 2500 springs, 14 bolt SF, Truetrac, 4.56
|
|
|
|
|
06-09-2009, 09:23 PM
|
#10
|
|
Supporting Member
Join Date: Apr 2008
Location: was Ohio, now Washington
Age: 26
Posts: 1,064
|
Re: Ring & Pinions, front diff, axle shafts
right around $90 fedex. Its about 36"x18x12" and weights ~85lbs.
__________________
UNDER CONSTRUCTION click here 99 GMC RCLB ~19" Dana 60 & 14FF Detroit 5.38s GM HotCam Tom Woods Driveshafts PSC Steering Mazzi 20x12s Bilstein 7100s 36 MTZs(44" Pitbulls soon)
04 GMC Z71 ECSB
|
|
|
|
|
06-11-2009, 10:15 AM
|
#11
|
|
Registered User
Join Date: Aug 2008
Location: Delaware
Age: 31
Posts: 77
|
Re: Ring & Pinions, front diff, axle shafts
Shipping quote to 19977 for front diff and/or rear gears? I'm slightly slow on the rear sizes, would your 99 Body style 8.6 10 bolt be the same for my 99 OBS? Sorry if that is a dumb question.
The 4.56's should be a good match to 35x14.50's Nitto Mud Grapplers right? You said you have an
Eaton Posilock in the rear right? No locker up front correct?
thanks
__________________
99 ECSB OBS Z71 - 6" Superlift on 35x14.50x16 Nitto Mud Grapplers
06 4 Dr Hoe - cranked, 305x65x17 ProComp XAT
09 Silverado Crew Cab 2wd DD- leveled rear and factory tahoe 20's
Last edited by DEK5; 06-11-2009 at 08:02 PM.
|
|
|
|
|
06-12-2009, 12:32 AM
|
#12
|
|
Supporting Member
Join Date: Apr 2008
Location: was Ohio, now Washington
Age: 26
Posts: 1,064
|
Re: Ring & Pinions, front diff, axle shafts
Quote:
Originally Posted by DEK5
Shipping quote to 19977 for front diff and/or rear gears? I'm slightly slow on the rear sizes, would your 99 Body style 8.6 10 bolt be the same for my 99 OBS? Sorry if that is a dumb question.
The 4.56's should be a good match to 35x14.50's Nitto Mud Grapplers right? You said you have an
Eaton Posilock in the rear right? No locker up front correct?
thanks
|
Not forsure, but I would say that the 99 OBS would probably have the 8.5 rear. 4.56s on 35s are basically the same ratio as 3.73s on 245s. As for the Eaton, DAD already has called that one. His 06 came with the open diff, so he swapped in my old G80 and I think the pin might already be pulled on that grenade. He says it only works part of the time. I won't get any money out of that deal, but he has given me more than what $ can pay for.
Yes, no locker up front. No traction devices for the 8.25 front.
__________________
UNDER CONSTRUCTION click here 99 GMC RCLB ~19" Dana 60 & 14FF Detroit 5.38s GM HotCam Tom Woods Driveshafts PSC Steering Mazzi 20x12s Bilstein 7100s 36 MTZs(44" Pitbulls soon)
04 GMC Z71 ECSB
|
|
|
|
|
06-12-2009, 06:58 AM
|
#13
|
|
Registered User
Join Date: Aug 2008
Location: Delaware
Age: 31
Posts: 77
|
Re: Ring & Pinions, front diff, axle shafts
Understand completely, parents normally get first call on anything! I will do a little more homework on my end but when you have a chance can you check shipping for both? 19977
Thanks
__________________
99 ECSB OBS Z71 - 6" Superlift on 35x14.50x16 Nitto Mud Grapplers
06 4 Dr Hoe - cranked, 305x65x17 ProComp XAT
09 Silverado Crew Cab 2wd DD- leveled rear and factory tahoe 20's
|
|
|
|
|
06-12-2009, 06:31 PM
|
#14
|
|
Supporting Member
Join Date: Apr 2008
Location: was Ohio, now Washington
Age: 26
Posts: 1,064
|
Re: Ring & Pinions, front diff, axle shafts
$80-$90. I am going to split the case and drain the oil when I ship it anywhere to make the package a little smaller and lighter.
__________________
UNDER CONSTRUCTION click here 99 GMC RCLB ~19" Dana 60 & 14FF Detroit 5.38s GM HotCam Tom Woods Driveshafts PSC Steering Mazzi 20x12s Bilstein 7100s 36 MTZs(44" Pitbulls soon)
04 GMC Z71 ECSB
|
|
|
|
|
06-13-2009, 11:11 PM
|
#15
|
|
Registered User
Join Date: Mar 2006
Location: Conroe
Age: 19
Posts: 514
|
Re: Ring & Pinions, front diff, axle shafts
PM'd you stoner. Very interested in the front differential!!
__________________
'94 ECSB Z71 stainless headers, x-pipe with no cats, 3" single chambers, tuned by ME, 12.9mpg 
And Goin Down...
|
|
|
|
|
06-14-2009, 12:20 PM
|
#16
|
|
Supporting Member
Join Date: Apr 2008
Location: was Ohio, now Washington
Age: 26
Posts: 1,064
|
Re: Ring & Pinions, front diff, axle shafts
Another note for everyone. I had a ProComp lift which required 1 mounting tab to be removed so ProComp's mounting tab could be mounted via the bolts that hold the 2 case halves together.
Also, my zip is 98045 if you want to run the shipping. I throw it in a a 30"x18"x14" box that weighs about 85lbs.
The front was completely rebuilt when the gears were but in.
Ring & Pinion $225
rebuild $155
Install by shop $500
LOOK HERE ANTMAN
__________________
UNDER CONSTRUCTION click here 99 GMC RCLB ~19" Dana 60 & 14FF Detroit 5.38s GM HotCam Tom Woods Driveshafts PSC Steering Mazzi 20x12s Bilstein 7100s 36 MTZs(44" Pitbulls soon)
04 GMC Z71 ECSB
Last edited by rstoner1026; 08-13-2009 at 10:33 PM.
|
|
|
|
|
06-18-2009, 11:53 PM
|
#17
|
|
Supporting Member
Join Date: Apr 2008
Location: was Ohio, now Washington
Age: 26
Posts: 1,064
|
Re: Ring & Pinions, front diff, axle shafts
bump
__________________
UNDER CONSTRUCTION click here 99 GMC RCLB ~19" Dana 60 & 14FF Detroit 5.38s GM HotCam Tom Woods Driveshafts PSC Steering Mazzi 20x12s Bilstein 7100s 36 MTZs(44" Pitbulls soon)
04 GMC Z71 ECSB
|
|
|
|
|
06-20-2009, 05:48 AM
|
#18
|
|
bikes cars trucks women
Join Date: Jan 2004
Location: Dixon IL
Age: 27
Posts: 1,549
|
Re: Ring & Pinions, front diff, axle shafts
how much for the 4.10s for the 14 bolt 9.5????
__________________
91 GMC 350 5 speed, SAS started, HP 60/14 bolt
91 camaro, bolt ons, 454 started on rebuild, waiting on wieland 8-71 blower
'00 ZX9R, 150 RWHP
'84 K10, 6" Tuff Country, 35s. soon to have 1 ton swap and 383 TPI
'63 CJ5
TUFF COUNTRY LIFT FOR SALE $450, EAGLE WHEELS AND 35" BFGs $1200
|
|
|
|
|
06-22-2009, 11:32 PM
|
#19
|
|
Supporting Member
Join Date: Apr 2008
Location: was Ohio, now Washington
Age: 26
Posts: 1,064
|
Re: Ring & Pinions, front diff, axle shafts
$25+ shipping. Sorry I didn't get back quicker.
__________________
UNDER CONSTRUCTION click here 99 GMC RCLB ~19" Dana 60 & 14FF Detroit 5.38s GM HotCam Tom Woods Driveshafts PSC Steering Mazzi 20x12s Bilstein 7100s 36 MTZs(44" Pitbulls soon)
04 GMC Z71 ECSB
|
|
|
|
|
06-23-2009, 12:27 PM
|
#20
|
|
Registered User
Join Date: Jun 2008
Location: Southern, Md
Age: 31
Posts: 67
|
Re: Ring & Pinions, front diff, axle shafts
how much for the 4.10's shipped to 20646. I am really looking for a set of 4.56 for a 14SF.
__________________
1998 K1500 Silverado DC 6.5 lift w/35" XTerrains
Pro-comp 7089's and a SF 14 Bolt rear |
|
|
|
| Thread Tools |
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
