EDIT: 95 w/t part out

[94383Z71]

still working with the guy on the roof, waiting on my glass guy

Headliner's out/pitched
pass door's gutted and scrapped
scrapped pass inner fender
drilled the doorhandles from the door card, so I have both of those still, perfect condition.

I may be pulling the driver's fender and blasting/priming it so it wont need any work.

I'll also update this with lists of ebayed items, pm me if i ebay something you want

Also, the truck will be gone by the time snow flies, so if it's here at that moment, she's being scrapped

since the pics seem to be clogging the thread and I cant make them attachments, I'll only post them when requested

[93 C1500]

do you have the wiper cowl ?? i need the small piece that bolts to the fender on the passenger side

[94383Z71]

I believe we do. I'm at work right now, I'll let you know by tomorrow if it's there

[93 C1500]

PM me if you got it or not

[94383Z71]

pm sent

[94383Z71]

Todays my neighbor came by, asking about the rear fame. Long story short, we sold him eveything he needs for his trailer for 125. I'll get everything scrap wise from it, as well as pretty much everything cab-forward still.

Everything cab back-sold (except wheels/tires)
Pass cowling-Pending

[94383Z71]

neighbor still hasnt come by with any $$, so it's all up for grabs still.

Stripped the interior, Seat/belts/carpet/speaker covers/jack box are all junk, and so is the main cowling

Sale pending on driver's handle and pass cowling

[bhookxen]

curious if you would have the bolt-in bracket & rubber hanger for the exhaust about halfway back? the attached pics should give you a good idea what i'm talking about. not sure if a rclb is the same set-up as a ecsb




just let me know when you can.

thanks!

[94383Z71]

funny you should say that

That exhaust fell off a few weeks ago, and we took the hangers off then. I dont think I still have them, but I'll look

[bhookxen]

cool. definately would appreciate it.

thanks!

[94383Z71]

Originally Posted by bhookxen

cool. definately would appreciate it.

thanks!

I took one bracket off before the frame curve last night FWIW. I have another (not sure where from) too, I'll try for pics later, to see if you think either of them would work for you. Heck, you could have em 2 for one if it helped, I dont need em

As for the rest of the truck. Drained all fluids last night, alternator and a few things are off the motor, and loosed the cab. cab'll come off tonight as well as possibly the tranny and engine. I'll be keeping the tranny and I may have a local buy for the engine and part of the frame.

Either way, it should all be scrapped by the end of the week, unless anyone else wants specific interior pieces (already removed parts like the grill, and certain int pieces will be kept for a bit too see if anyone wants them, then pitched)

But for right now, I'll obviously keep it around if people need parts. Also, for anyone wanting the rims/tire, PM me, as the should be free around the week's end

[bhookxen]

awesome! did you happen to get the rubber bushings off them as well???

[94383Z71]

ironically I can't get the bushings off them or else 1 of them would be in a scrap pile at Spooner's Scrap

Still on






and the one I have off

[94383Z71]

As for the rest of the truck:

Engine/tranny out and apart
Cab off
Cab/core support/motor loaded on scrap trailer





Deal pending on frame sections, but if it's cut, the rest will be scrapped (being the front end mainly)

Still have:

Hood hinges
Aluminum RBLB driveshaft
4.3 Fan shroud
ABS unit
Alternator
1 interior door handle assbly.
Bilstien shocks, low miles (2-4)
Wheels/Tires

possibly more

[93 C1500]

got my parts today, thanks again !

[DURAGAS 8.1]

what do ya want for the steering wheel before it goes

[bhookxen]

i believe that is the one i am looking for!


would it be possible to get measurements from hole-to-hole, and the size of hole it is??? for some reason they look like a smaller diameter, but anyways.

let me know when you can. i definately appreciate you taking the time to do this.

thanks again!

[94383Z71]

Originally Posted by 93 C1500

got my parts today, thanks again !

Good to hear man

Originally Posted by DURAGAS 8.1

what do ya want for the steering wheel before it goes

Uh, I have no idea about steering wheels

how's like 30 bucks and shipping? and it doesnt have the airbag in it, but we can send it with it, since I bet you need it

still interested in the JVC?

Originally Posted by bhookxen

i believe that is the one i am looking for!

would it be possible to get measurements from hole-to-hole, and the size of hole it is??? for some reason they look like a smaller diameter, but anyways.

let me know when you can. i definately appreciate you taking the time to do this.

thanks again!

good to hear! I was hoping one would be right

I'll get the measurements later when I pull that steering wheel. do you need the nuts for the back? I'm pretty sure they're welded to the frame


As for the truck, we sold the frame whole

Still have:
Alum Dshaft, RCLB
Fan shroud 4.3
Alternator
ABS unit
hood hinges
wheels/tires
cab (for tonight, gets scrapped tomorrow at 4)


I have access to the frame, if anyone really needs it. I bet he'd like to sell parts anyone wants to make some bucks back

[DURAGAS 8.1]

could you check it out to see if it fits on your dads truck i just like the 95-98 steering wheel better than mine ill have to see what i can spend from upper management before i give you the ya or nay on the jvc

[bhookxen]

Originally Posted by 94383Z71

good to hear! I was hoping one would be right

I'll get the measurements later when I pull that steering wheel. do you need the nuts for the back? I'm pretty sure they're welded to the frame

don't really care about the nuts/bolts, i can figure that part out. i'd mainly just like the holes to line up, or be close enough to "waller" out one of them.